rmreddy5's Build

rmreddy5 · 05-28-2016, 01:40 PM

Hi guys, thought I'd share my build after a long time. IND was entirely responsible for the Beast. Living 5 miles away from them is a blessing and a curse haha.

2016 Black Sapphire Metallic
Black interior
Ccquartz applied
BMC Air Filters
35% Front Window Tint
IND cosmetic package (gloss black)
Gloss Black Roof Rail swap (satin aluminum before)
RKP Rear Diffuser
RKP Bumper Inserts
RKP Front Lip
ACS Springs
Eisenmann Sport exhaust
Eisenmann Catless Downpipes
KW V3 Coilovers
Dinan Stage 1
22" Velos Solo V (summer setup)
M-performance Carbon Fiber Side Mirror Covers
M-performance Carbon Fiber Center Console
M-performance Floormats
M-performance pedals
Macht Snell Valve Control Module
IND Carbon Fiber Steering Wheel insert

tastelid · 05-28-2016, 02:07 PM

Most impressive is that your custom plate was still available. Nobody thought to claim BEAST? Great looking car.

You keeping the other x5?

rmreddy5 · 05-28-2016, 02:14 PM

Quote:

Originally Posted by tastelid

Most impressive is that your custom plate was still available. Nobody thought to claim BEAST? Great looking car.

You keeping the other x5?

Yeah it's the wife's. She said do whatever you want with your BEAST but don't touch mine! Haha

fyim · 05-28-2016, 02:39 PM

Stunning beast. Congrats

As for BMC air filters, are they available to order? And from where? Thanks

Ryngo · 05-28-2016, 02:45 PM

Looks awesome!! So the mystery of the second IND black car is solved! How do you like the front lip?? I think it looks sharp. Are those bayerns for your winter setup? They look mean - but no staggered stance right? Thoughts on how that looks from behind?

Nice work though. You went all out. She pretty

rmreddy5 · 05-28-2016, 02:49 PM

Quote:

Originally Posted by Ryngo

Looks awesome!! So the mystery of the second IND black car is solved! How do you like the front lip?? I think it looks sharp. Are those bayerns for your winter setup? They look mean - but no staggered stance right? Thoughts on how that looks from behind?

Nice work though. You went all out. She pretty

Yes she's the mysterious second IND F85. I love the lip, totally transformed the front end. The Bayern's are for the winter setup, non-staggered. Looks horrendous from behind during the winter. Jnsol's setup was probably more beast-like for the winter. I guess I don't really care during the winter since she's mostly covered in snow anyhow.

Thank you!

Warehouser · 05-28-2016, 02:57 PM

Sweet ride! Looking forward to getting that lip for mine.

robbys3m3 · 05-29-2016, 12:12 AM

Looks great! Can't wait for your thoughts after coils...I hope they aren't worth it

Djvolume · 05-29-2016, 02:20 AM

Quote:

Originally Posted by rmreddy5

Hi guys, thought I'd share my build after a long time. IND was entirely responsible for the Beast. Living 5 miles away from them is a blessing and a curse haha.

2016 Black Sapphire Metallic
Black interior
Ccquartz applied
35% Front Window Tint
IND cosmetic package (gloss black)
Gloss Black Roof Rail swap (satin aluminum before)
RKP Rear Diffuser
RKP Bumper Inserts
RKP Front Lip
ACS Springs
Eisenmann Sport exhaust
Dinan Stage 1
22" Velos Solo V (summer setup)
M-performance Carbon Fiber Side Mirror Covers
M-performance Carbon Fiber Center Console
M-performance Floormats
M-performance pedals
Macht Snell Valve Control Module
IND Carbon Fiber Steering Wheel insert

Soon:
KW Coilovers
BMC Air Filters

With the macht module, do you have any issues? I have mine installed and it only opens one side on the valve the other stays closed called them direct they said 06/16 and Up production is not supported...

rmreddy5 · 05-29-2016, 09:18 AM

Quote:

Originally Posted by Djvolume

Quote:

Originally Posted by rmreddy5

Hi guys, thought I'd share my build after a long time. IND was entirely responsible for the Beast. Living 5 miles away from them is a blessing and a curse haha.

2016 Black Sapphire Metallic
Black interior
Ccquartz applied
35% Front Window Tint
IND cosmetic package (gloss black)
Gloss Black Roof Rail swap (satin aluminum before)
RKP Rear Diffuser
RKP Bumper Inserts
RKP Front Lip
ACS Springs
Eisenmann Sport exhaust
Dinan Stage 1
22" Velos Solo V (summer setup)
M-performance Carbon Fiber Side Mirror Covers
M-performance Carbon Fiber Center Console
M-performance Floormats
M-performance pedals
Macht Snell Valve Control Module
IND Carbon Fiber Steering Wheel insert

Soon:
KW Coilovers
BMC Air Filters

With the macht module, do you have any issues? I have mine installed and it only opens one side on the valve the other stays closed called them direct they said 06/16 and Up production is not supported...

Wow good to know. I don't think so but I'm headed to IND soon and I'll ask them to check it out. But I've had it since last December without any issues as far as I know.

r33_RGSport · 05-29-2016, 09:50 AM

Nice build!!!

XX66MM , BMC air filter is 2-3 weeks out to order. Planning to do stocking order, but doesn't seem like a great demand.

Djvolume · 05-31-2016, 02:47 AM

Quote:

Originally Posted by rmreddy5

Quote:

Originally Posted by Djvolume

Quote:

Originally Posted by rmreddy5

Hi guys, thought I'd share my build after a long time. IND was entirely responsible for the Beast. Living 5 miles away from them is a blessing and a curse haha.

2016 Black Sapphire Metallic
Black interior
Ccquartz applied
35% Front Window Tint
IND cosmetic package (gloss black)
Gloss Black Roof Rail swap (satin aluminum before)
RKP Rear Diffuser
RKP Bumper Inserts
RKP Front Lip
ACS Springs
Eisenmann Sport exhaust
Dinan Stage 1
22" Velos Solo V (summer setup)
M-performance Carbon Fiber Side Mirror Covers
M-performance Carbon Fiber Center Console
M-performance Floormats
M-performance pedals
Macht Snell Valve Control Module
IND Carbon Fiber Steering Wheel insert

Soon:
KW Coilovers
BMC Air Filters

With the macht module, do you have any issues? I have mine installed and it only opens one side on the valve the other stays closed called them direct they said 06/16 and Up production is not supported...

Wow good to know. I don't think so but I'm headed to IND soon and I'll ask them to check it out. But I've had it since last December without any issues as far as I know.

Let me know... Or you can run a test yourself just flick the switch and look under the rear bumper if the exhaust opens up on both sides. I called to figure it out but the only answer I got from eas is if you don't like it return it back to ind

Djvolume · 05-31-2016, 02:51 AM

Quote:

Originally Posted by Djvolume

Quote:

Originally Posted by rmreddy5

Quote:

Originally Posted by Djvolume

Quote:

Originally Posted by rmreddy5

Hi guys, thought I'd share my build after a long time. IND was entirely responsible for the Beast. Living 5 miles away from them is a blessing and a curse haha.

2016 Black Sapphire Metallic
Black interior
Ccquartz applied
35% Front Window Tint
IND cosmetic package (gloss black)
Gloss Black Roof Rail swap (satin aluminum before)
RKP Rear Diffuser
RKP Bumper Inserts
RKP Front Lip
ACS Springs
Eisenmann Sport exhaust
Dinan Stage 1
22" Velos Solo V (summer setup)
M-performance Carbon Fiber Side Mirror Covers
M-performance Carbon Fiber Center Console
M-performance Floormats
M-performance pedals
Macht Snell Valve Control Module
IND Carbon Fiber Steering Wheel insert

Soon:
KW Coilovers
BMC Air Filters

With the macht module, do you have any issues? I have mine installed and it only opens one side on the valve the other stays closed called them direct they said 06/16 and Up production is not supported...

Wow good to know. I don't think so but I'm headed to IND soon and I'll ask them to check it out. But I've had it since last December without any issues as far as I know.

Let me know... Or you can run a test yourself just flick the switch and look under the rear bumper if the exhaust opens up on both sides. I called to figure it out but the only answer I got from eas is if you don't like it return it back to ind

See below on models supported for f85

Djvolume · 05-31-2016, 02:52 AM

Quote:

Originally Posted by r33_RGSport

Nice build!!!

XX66MM , BMC air filter is 2-3 weeks out to order. Planning to do stocking order, but doesn't seem like a great demand.

I installed mine a few weeks back, can't tell the difference much

JNoSol · 06-03-2016, 09:05 AM

Quote:

Originally Posted by Djvolume

I installed mine a few weeks back, can't tell the difference much

Butt dyno can't detect 2-5HP increase, that's less than 1% in change. If it's 10%, then you can feel it.

On BMC filters, let it sit on paper towels over night. They do come overly oiled and will throw CEL on BMWs. Learned this from the M5 forums, most of them went back to OEM filters because they didn't remove excess oil.

100smilesagallon · 06-03-2016, 09:47 AM

Looks great! How is that roof rail wrap holding up? Did you have to remove the rails for wrapping?
I have satin aluminum rails as well and its kinda ruining the look of the car (mine is Carbon metallic black)

rmreddy5 · 06-03-2016, 10:04 AM

Quote:

Originally Posted by B7S4

Looks great! How is that roof rail wrap holding up? Did you have to remove the rails for wrapping?
I have satin aluminum rails as well and its kinda ruining the look of the car (mine is Carbon metallic black)

Actually had the rails swapped. Didn't want to deal with the wrap.

100smilesagallon · 06-03-2016, 10:10 AM

Quote:

Originally Posted by rmreddy5

Actually had the rails swapped. Didn't want to deal with the wrap.

Ah I see. Was it an easy process to remove the rails? I think it requires the headliner to be removed, right?

rmreddy5 · 06-03-2016, 10:11 AM

Quote:

Originally Posted by B7S4

Quote:

Originally Posted by rmreddy5

Actually had the rails swapped. Didn't want to deal with the wrap.

Ah I see. Was it an easy process to remove the rails? I think it requires the headlines to be removed, right?

No idea - IND took care of it for me, but yes my understanding is that the roof liner had to be removed.

100smilesagallon · 06-03-2016, 10:13 AM

Quote:

Originally Posted by rmreddy5

No idea - IND took care of it for me, but yes my understanding is that the roof liner had to be removed.

Gotcha. Amazing build

FedM · 06-03-2016, 11:50 AM

Can you post more pics of the lip please

rmreddy5 · 06-03-2016, 11:54 AM

Quote:

Originally Posted by FedM

Can you post more pics of the lip please

Will try this weekend. The Beast is filthy haha

05-28-2016, 01:40 PM	#1
rmreddy5 Private First Class 58 Rep 138 Posts Drives: 2016 X5M, 2015 X5 M-Sport Join Date: Nov 2015 Location: Barrington, IL iTrader: (0)	rmreddy5's Build Hi guys, thought I'd share my build after a long time. IND was entirely responsible for the Beast. Living 5 miles away from them is a blessing and a curse haha. 2016 Black Sapphire Metallic Black interior Ccquartz applied BMC Air Filters 35% Front Window Tint IND cosmetic package (gloss black) Gloss Black Roof Rail swap (satin aluminum before) RKP Rear Diffuser RKP Bumper Inserts RKP Front Lip ACS Springs Eisenmann Sport exhaust Eisenmann Catless Downpipes KW V3 Coilovers Dinan Stage 1 22" Velos Solo V (summer setup) M-performance Carbon Fiber Side Mirror Covers M-performance Carbon Fiber Center Console M-performance Floormats M-performance pedals Macht Snell Valve Control Module IND Carbon Fiber Steering Wheel insert Attached Images Last edited by rmreddy5; 08-04-2016 at 11:33 PM.. Reason: UPDATE!
	Appreciate 6 Tweet Quote

05-28-2016, 02:07 PM	#2
tastelid Captain 166 Rep 710 Posts Drives: 2016 X5M Join Date: Oct 2015 Location: The Great Northwest, USA iTrader: (0)	Most impressive is that your custom plate was still available. Nobody thought to claim BEAST? Great looking car. You keeping the other x5? __________________ Cars: 2016 BMW X5M. 2017 BMW X1. Bikes: 2007 BMW F650GS. 2014 BMW K1600GTL Exclusive. 2014 BMW HP4 Competition. 2016 BMW K1300S.
	Appreciate 1 Quote

05-28-2016, 02:39 PM	#4
fyim First Lieutenant 83 Rep 377 Posts Drives: E92 Join Date: Jul 2009 Location: East iTrader: (0)	Stunning beast. Congrats As for BMC air filters, are they available to order? And from where? Thanks
	Appreciate 1 Quote

05-28-2016, 02:45 PM	#5
Ryngo Second Lieutenant 129 Rep 253 Posts Drives: 2016 F85 X5///M, DG Join Date: Dec 2015 Location: Baltimore County, MD iTrader: (0)	Looks awesome!! So the mystery of the second IND black car is solved! How do you like the front lip?? I think it looks sharp. Are those bayerns for your winter setup? They look mean - but no staggered stance right? Thoughts on how that looks from behind? Nice work though. You went all out. She pretty
	Appreciate 0 Quote

05-28-2016, 02:57 PM	#7
Warehouser Private First Class 29 Rep 147 Posts Drives: 22 X5M TBlue2 Join Date: Nov 2012 Location: SE Texas iTrader: (0)	Sweet ride! Looking forward to getting that lip for mine. __________________ 22' X5M Comp
	Appreciate 1 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5M (F85) and X6M (F86) Forum
rmreddy5's Build

05-29-2016, 12:12 AM	#8
robbys3m3 Lieutenant Colonel 1941 Rep 1,552 Posts Drives: M3's Join Date: Jan 2010 Location: Tulsa, OK iTrader: (1)	Looks great! Can't wait for your thoughts after coils...I hope they aren't worth it __________________ 2020 M2 CS, 2018 M3 CS, 2016 M4 GTS, 2013 M3 LRP, 2011 1M, 2011 M3 GTRS3, 2004 M3, 2002 M3, 2000 M Coupe, 2002 M5, 1997 M3, 1988 M3, 2022 STO, 2020 Urus, 2022 TRX, 2022 392, 2021 SVJ, 2018 Performante, 2013 Gallardo 550-2, 2012 Gallardo STS, 2018 R8 RWS, 2012 R8, 2017 G550 4X4^2, 2015 GT3, 2015 Continental GT3R, 1971 Bronco
	Appreciate 0 Quote

05-29-2016, 09:50 AM	#11
r33_RGSport General 12966 Rep 18,713 Posts Drives: G09 XM, G05 X5 40, 991.2 T Join Date: Oct 2009 Location: So. Cal iTrader: (6)	Nice build!!! XX66MM , BMC air filter is 2-3 weeks out to order. Planning to do stocking order, but doesn't seem like a great demand. __________________ Email:sales@rgsport.com \| IG:RGSport_USA \| Web:RGSportShop.com PM for Everyday DEALS!! MSS • iSweep • RaceChip • Sterckenn • AutoTecknic • Akrapovic • Vossen Wheels • Eventuri Active Autowerke • KW • H&R • Ohlins • Remus • and more...
	Appreciate 1 Quote

06-03-2016, 09:47 AM	#16
100smilesagallon Private First Class 27 Rep 111 Posts Drives: X3MC Join Date: Apr 2008 Location: DC Metro iTrader: (0)	Looks great! How is that roof rail wrap holding up? Did you have to remove the rails for wrapping? I have satin aluminum rails as well and its kinda ruining the look of the car (mine is Carbon metallic black)
	Appreciate 0 Quote

06-03-2016, 11:50 AM	#21
FedM Second Lieutenant 34 Rep 263 Posts Drives: F86, F13 Join Date: Nov 2012 Location: Moscow, RU iTrader: (0)	Can you post more pics of the lip please
	Appreciate 0 Quote