07-26-2020, 09:33 AM | #1 |
Lieutenant
144
Rep 439
Posts
Drives: 07 E92 335 / 17 F16 X6 35i
Join Date: Jun 2015
Location: ROCHESTER NY
|
F10 M5 Brake Project
Snagged these fellas for a deal off ebay last week.
Looking to figure out what else I need to complete the package. Here's what I've got so far that I'll need: F85/F86 SS Lines F10 M5 Rotors Pads Brackets for Calipers (Need to find a print so I can make them on my CNC) Brake Fluid Anything else I'm missing? Do I code it to M-performance brakes? Might actually wait until my car is out of warranty in Feb. Total Costs for Project (Last Updated 7/20/20): F10 M5 F&R Calipers - $1100 (Source: eBay) - 7/29/20 - Calipers have arrived! Updated total costs above.
__________________
@mikecentola
07 335i SG / CR - LOTS OF MODS - BUILD THREAD 17 X6 SG / LCSW - ZMM/ZCW/ZDA/ZDB/ZLP/ZPP/MPPK - H&R VTR / Vossen 22x10.5/22x12 18 Ford Raptor Last edited by screaminfast; 07-29-2020 at 01:11 PM.. |
07-26-2020, 01:00 PM | #3 |
Lieutenant
144
Rep 439
Posts
Drives: 07 E92 335 / 17 F16 X6 35i
Join Date: Jun 2015
Location: ROCHESTER NY
|
I read through that thread several times so I must have missed something. Looks like I can get rotors for ~$800 for a full set. Where's the other $2200 come in?
__________________
@mikecentola
07 335i SG / CR - LOTS OF MODS - BUILD THREAD 17 X6 SG / LCSW - ZMM/ZCW/ZDA/ZDB/ZLP/ZPP/MPPK - H&R VTR / Vossen 22x10.5/22x12 18 Ford Raptor |
Appreciate
0
|
07-26-2020, 01:06 PM | #4 | |
Lieutenant Colonel
728
Rep 1,665
Posts |
Quote:
Another member did same set up and his overall cost all in was $4500, which I thought was steep but if you got the money, go for it! Lol |
|
Appreciate
0
|
07-26-2020, 04:03 PM | #5 | |
Lieutenant
144
Rep 439
Posts
Drives: 07 E92 335 / 17 F16 X6 35i
Join Date: Jun 2015
Location: ROCHESTER NY
|
Quote:
I'll keep updating this thread as I figure more things out.
__________________
@mikecentola
07 335i SG / CR - LOTS OF MODS - BUILD THREAD 17 X6 SG / LCSW - ZMM/ZCW/ZDA/ZDB/ZLP/ZPP/MPPK - H&R VTR / Vossen 22x10.5/22x12 18 Ford Raptor |
|
Appreciate
0
|
07-26-2020, 04:27 PM | #6 | ||
Lieutenant Colonel
728
Rep 1,665
Posts |
Quote:
|
||
Appreciate
0
|
07-26-2020, 05:15 PM | #7 |
Lieutenant Colonel
1193
Rep 1,547
Posts
Drives: '22 Tesla MY + '23 Tesla MY
Join Date: Jul 2010
Location: Land of high taxes and crappy healthcare
|
Don't think you can use the rear calipers.
__________________
| '22 Tesla Model Y P - My daily | '23 Tesla Model Y LR - Wife's daily | '17 F15 35D - missed daily |
|
Appreciate
1
djrabbi728.00 |
07-26-2020, 09:38 PM | #8 |
Lieutenant
144
Rep 439
Posts
Drives: 07 E92 335 / 17 F16 X6 35i
Join Date: Jun 2015
Location: ROCHESTER NY
|
Read through the brake thread again. I’m going to start with looking for the 400mm front rotors. Didn’t realize they were 7lbs lighter than the brakenetic ones. I have plenty of time to rebuild and repaint the calipers.
__________________
@mikecentola
07 335i SG / CR - LOTS OF MODS - BUILD THREAD 17 X6 SG / LCSW - ZMM/ZCW/ZDA/ZDB/ZLP/ZPP/MPPK - H&R VTR / Vossen 22x10.5/22x12 18 Ford Raptor |
Appreciate
0
|
07-29-2020, 01:09 PM | #9 |
Lieutenant
144
Rep 439
Posts
Drives: 07 E92 335 / 17 F16 X6 35i
Join Date: Jun 2015
Location: ROCHESTER NY
|
Just got the package in from ebay. More beat up than I thought, but came with pads for the fronts. Will most likely repaint and rebuild.
__________________
@mikecentola
07 335i SG / CR - LOTS OF MODS - BUILD THREAD 17 X6 SG / LCSW - ZMM/ZCW/ZDA/ZDB/ZLP/ZPP/MPPK - H&R VTR / Vossen 22x10.5/22x12 18 Ford Raptor |
Appreciate
0
|
07-29-2020, 11:49 PM | #10 |
Major General
4146
Rep 7,164
Posts
Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia
|
M5 rotors are more expensive than the X5m. Been awhile since I looked at cost but you don't have much options for them. Now they are the same calipers as the X5M so if you're gonna make a bracket you can make a completely new one to fit X5 chassis and save a bit there and find more aftermarket options. Rear M5 calipers I don't think work cuz of the integrated parking brake. X5 is different and doesn't utilize that parking brake. So you may still need rear calipers
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold) ‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe '14 X5 50i (wife’s now) |
Appreciate
0
|
10-01-2020, 05:40 PM | #11 |
Enlisted Member
6
Rep 37
Posts
Drives: F15 40d Sapphire Black
Join Date: Jun 2016
Location: Nottingham
|
I’ve just done this mod today. Cost me £1200 total for calipers, brackets & brand new discs.
|
Appreciate
0
|
10-02-2020, 10:20 AM | #12 |
Lieutenant
144
Rep 439
Posts
Drives: 07 E92 335 / 17 F16 X6 35i
Join Date: Jun 2015
Location: ROCHESTER NY
|
So I ended up returning these to ebay and grabbing a set of X5M calipers and rotors. However, I'm planning to design/make the brackets necessary to mount these calipers for future people.
__________________
@mikecentola
07 335i SG / CR - LOTS OF MODS - BUILD THREAD 17 X6 SG / LCSW - ZMM/ZCW/ZDA/ZDB/ZLP/ZPP/MPPK - H&R VTR / Vossen 22x10.5/22x12 18 Ford Raptor |
Appreciate
1
Maverik2594146.00 |
Post Reply |
Bookmarks |
|
|