Anyone with e-Sys located near Denver, Colorado?

[Rydogg21]

If anyone is near Denver or Boulder (or within 30 minutes of) I will drive to you and happily pay you. Need to code my bigger brake set-up.

Text me @ 1-412-877-2545. Many thanks!

[artem123]

There some members here who can do it remotely. No need to drive anywhere)))
I personally had a session with Almaretto, and it was awesome!
Highly recommended. Also Ben is just awesome all around.
All you need to buy is e-net cable either from Ben or Almaretto. And windoz lap top))

[Rydogg21]

Originally Posted by artem123

There some members here who can do it remotely. No need to drive anywhere)))
I personally had a session with Almaretto, and it was awesome!
Highly recommended. Also Ben is just awesome all around.
All you need to buy is e-net cable either from Ben or Almaretto. And windoz lap top))

Thanks for your help, after speaking with Ben, I will be installing to software tomorrow and have a cable. Hope its easy to get working as the coding part seems staright forward.

Ryan

[Almaretto]

Originally Posted by Rydogg21

Thanks for your help, after speaking with Ben, I will be installing to software tomorrow and have a cable. Hope its easy to get working as the coding part seems staright forward.

Ryan

Remote coding is very straight forward.

All you need is software to pull vehicle IP and remote software.
Then, connect to car, pull files, modify files, upload files. Enjoy.

[9mmkungfu]

Just saw this. I am in Denver with an E-sys cable and software if you still need any assistance.

[X Mon™]

Originally Posted by 9mmkungfu

Just saw this. I am in Denver with an E-sys cable and software if you still need any assistance.

I was gonna recommend you, but i wasn't sure you did call outs...

[9mmkungfu]

Originally Posted by X Mon™

I was gonna recommend you, but i wasn't sure you did call outs...

Hehe, always willing to help if I can! Although I am not on the E-sys level that you are on

[Rydogg21]

Originally Posted by 9mmkungfu

Just saw this. I am in Denver with an E-sys cable and software if you still need any assistance.

Hey! Thanks so much, just need to make one change. Please give me a call when you have a moment (pmed you).

Ryan

[Rydogg21]

Anyone have contact details for 9mmkungfu? Hoping to get this sorted this week.

[9mmkungfu]

We got this sorted tonight. Big thanks to Mr. 47 for posting the detailed instructions on page 26 of the megathread:

https://f15.bimmerpost.com/forums/sh...464952&page=26

This is my pay-it-forward from X Mon™ as well

[Rydogg21]

Originally Posted by 9mmkungfu

We got this sorted tonight. Big thanks to Mr. 47 for posting the detailed instructions on page 26 of the megathread:

https://f15.bimmerpost.com/forums/sh...464952&page=26

This is my pay-it-forward from X Mon™ as well

Can't say thank you enough, Nate bailed me out on this one and I am all set. Thanks again!