Unlock doors when engine turned off

[aroach04]

I brought my x5 in for service last week and it looks like the dealership reset some stuff as I had to reset a lot of my vehicle settings. One thing I haven't been able to reset thats frustrating the crap out of me is that the vehicle use to unlock all the doors when I turned off the motor and got out. Now it's only unlocking the drivers door.

Is that something I had coded before and need to now re-code, or is it just a setting somewhere? I've been unable to find a setting anywhere.

[Dirty Cash]

My 15 F15.50i "auto-unlocks" when I turn the vehicle off. If I'm right, it's a setting somewhere in iDrive, but at the moment I don't recall where. If no one responds within the hour, I should have the answer.

[Florida-X3]

Ours only unlocks the drivers door which is a pain as it's stored in the garage. If I need to get something out of it I have to walk around to the drivers side and unlock all the doors. .... and yes, I could use the exercise but it's all about convenience.

[Dirty Cash]

I just looked, and I can't find it anywhere in the settings, but I'm positive that all passengers can exit the vehicle w/o having to depress the unlock button on the doors (w/the exception of the rears which require the "BMW 2-Pull" for exiting.

[aroach04]

I think I found it, I must have had it coded before:

Unlock when STOP Engine (newer software)
BDC_BODY
CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING
nicht_aktiv
aktiv

[MN2///M]

Check what driver profile is active and then using the iDrive, from the manual of my 2017:

[MN2///M]

Or this may be what you were looking for, again in the iDrive, snippet from my manual for the 2017:

[aroach04]

Thanks MN2///M,
I'll check these as well, but I suspect these are settings in the new iDrive.

[Dirty Cash]

Originally Posted by MN2///M

Or this may be what you were looking for, again in the iDrive, snippet from my manual for the 2017:

Yep!

Just got back from the dealer and was talking with the Genius about this and the above from MN2///M is exactly how mine is setup!

[aroach04]

Looks like it was a coded option, I've re-coded.

[MN2///M]

Glad you got it worked out.

[eggyacid]

Originally Posted by aroach04

Looks like it was a coded option, I've re-coded.

Do you know which option to code?

[aroach04]

Originally Posted by eggyacid

Do you know which option to code?

Yup, it's:

Unlock when STOP Engine (newer software)
BDC_BODY
CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING
nicht_aktiv -> aktiv