BMW Coding Thread

[opasha]

Originally Posted by skalberti

Turn off Nav and Radio when door opens

BDC_BODY 3020 TcMaster,98 TCM_LOGIC_R_OFF_DOOR -> Aktiv

3068 LceMaster, 22 BLINKZYKLEN_ANZAHL_TIPP is the number of blinks for lane change. Default is wert 02 which is 3 blinks. Desired amount=werte+1. So werte=4 gives 5 blinks.


3068 LceMaster, 22 ESS_AKTIVIERBARER_AUSGANG - this is the emergency stop signal which is your rear brake lights flashing during a sudden emergency braking. -> bremslicht blinkend (this needs to be tested, not sure if we have the bulbs to make this work) to test, slam on your brakes driving about 50mph, preferably with someone behind you that knows what you're about to do. If you don't get a check bulb error on your dash this should work.


3068 LceMaster, 22 FLA_AKTIVIERUNG-> default is LDS in A set to LDS in A or 2. This turns on your FLA not only in the auto light setting, but also when you manually turn the headlights on.

Thanks, Shawn . I updated the OP with this coding # 10-12 in my coding list. I didn't add the first one because that is already available in r33's cheat sheet. Is the last one the FLA camera? What exactly does that do? Is that for using the anti dazzle and auto high beam when you have the headlights manually on so they use the FLA camera? Or is it for use with the VLD coding?

[shawnsheridan]

FLA_AKTIVIERUNG sets High Beam Assist (HBA) on by default with lights in Auto or Manual On Position.

[opasha]

Originally Posted by shawnsheridan

FLA_AKTIVIERUNG sets High Beam Assist (HBA) on by default with lights in Auto or Manual On Position.

Ah, that makes sense. Thanks for the clarification, my friend .

[r33_RGSport]

@opasha, I've just set you to be able to edit on the cheatsheet. Maybe you can type up the addition that's not in the cheatsheet.
@skalberti, PM me your email address, and I'll add you to be able to edit the google docs.
I've been leaving it open where everybody can edit, and I saw it got messed up twice. So, I only allow few knowledgeable member to be able to edit.
@wdimagineer, PM me also if you want to be able to edit it.

[radarguy]

Originally Posted by hyde

...
Close Window via Comfort Access (This was standard with Comfort Access on E70, isn't it on F15? Keep holding handle to roll windows up)
...

This is standard on 2015 with comfort access. No coding required.

[opasha]

Originally Posted by r33

@opasha, I've just set you to be able to edit on the cheatsheet. Maybe you can type up the addition that's not in the cheatsheet.
@skalberti, PM me your email address, and I'll add you to be able to edit the google docs.
I've been leaving it open where everybody can edit, and I saw it got messed up twice. So, I only allow few knowledgeable member to be able to edit.
@wdimagineer, PM me also if you want to be able to edit it.

Thanks, buddy. I'll try to add to it when I get time.

[shawnsheridan]

Originally Posted by radarguy

This is standard on 2015 with comfort access. No coding required.

Are you sure? Normally in the U.S., Open Windows from Fob or Comfort Access works, but Close function needs to be coded.

[skalberti]

Originally Posted by shawnsheridan

FLA_AKTIVIERUNG sets High Beam Assist (HBA) on by default with lights in Auto or Manual On Position.

This code isn't the same as FLA_AUTO_AKTIV. By default on the F15, you can only activate the HBA when the headlight switch is in the auto position. When you manually turn the headlights on and depress the HBA button on the BC nothing happens. FLA_AKTIVIERUNG allows you to turn on the HBA in the auto position or turning your headlight switch all the way to the right or position 2.

[shawnsheridan]

Ok. Thanks for clarifying.

[opasha]

Originally Posted by skalberti

This code isn't the same as FLA_AUTO_AKTIV. By default on the F15, you can only activate the HBA when the headlight switch is in the auto position. When you manually turn the headlights on and depress the HBA button on the BC nothing happens. FLA_AKTIVIERUNG allows you to turn on the HBA in the auto position or turning your headlight switch all the way to the right or position 2.

Ok, I corrected the OP with your info. Thanks .

[hyde]

Originally Posted by shawnsheridan

Are you sure? Normally in the U.S., Open Windows from Fob or Comfort Access works, but Close function needs to be coded.

Why would they remove the function that was there in earlier model?

[opasha]

Originally Posted by hyde

Why would they remove the function that was there in earlier model?

BMW does a lot of stupid things like this, lol. Audis and Mercs have power fold mirror option with the keyfob selectable in their vehicle menu (it's a default setting). For us, we have to CODE this, and it's the same deal with the power windows and comfort access.

[kiwiandy]

I am sure I have seen somewhere there is a coding option for this, but dont see it in the F15 cheatsheet or the OP.
My problem is that the HUD display is too far to the left and if I move my head a little to the left it starts to disappear... I would like to try and position it further to the right.

[opasha]

Originally Posted by kiwiandy

I am sure I have seen somewhere there is a coding option for this, but dont see it in the F15 cheatsheet or the OP.
My problem is that the HUD display is too far to the left and if I move my head a little to the left it starts to disappear... I would like to try and position it further to the right.

From what I've read here, it's not adjustable horizontally even by the dealer: http://www.bimmerfest.com/forums/sho...d.php?t=754544

[radarguy]

Originally Posted by shawnsheridan

Are you sure? Normally in the U.S., Open Windows from Fob or Comfort Access works, but Close function needs to be coded.

Close windows works with comfort access, but not with the fob. 2015 F15.

[hyde]

Hi,
Do I need the full or lite of the software?

PSdZDATA v.53.5_PSdZData_Lite
or
PSdZDATA v.53.5_PSdZData_Full

Seller says "for general coding you only need the Lite files … for flashing modules, you need the Full version"

I guess we are not flashing modules, right? Because that thing is like 30GB vs lite only 5GB.

[shawnsheridan]

Originally Posted by hyde

Hi,
Do I need the full or lite of the software?

PSdZDATA v.53.5_PSdZData_Lite
or
PSdZDATA v.53.5_PSdZData_Full

Seller says "for general coding you only need the Lite files … for flashing modules, you need the Full version"

I guess we are not flashing modules, right? Because that thing is like 30GB vs lite only 5GB.

You need only the Lite Version for all coding.

Who is the seller? You should not be paying for coding files, only the Token solution and ENET Cable.

[hyde]

Originally Posted by shawnsheridan

You need only the Lite Version for all coding.

Who is the seller? You should not be paying for coding files, only the Token solution and ENET Cable.

It's bundled with cable for free. I should have clarified ebay seller of cable who is giving the files for free. Sorry if I caused confusion.
Thanks for confirming Lite is all we will need.

[opasha]

Originally Posted by hyde

It's bundled with cable for free. I should have clarified ebay seller of cable who is giving the files for free. Sorry if I caused confusion.
Thanks for confirming Lite is all we will need.

Yep, as Shawn said, you only need the Lite version.

[sbkim]

Sorry if this was discussed previously but is there anyway to code to have electronic speedometer in the center display (e.g., XX mph that is clearly visible - ie bigger font) OR do I need the digital cluster?

Thanks

[opasha]

Originally Posted by sbkim

Sorry if this was discussed previously but is there anyway to code to have electronic speedometer in the center display (e.g., XX mph that is clearly visible - ie bigger font) OR do I need the digital cluster?

Thanks

This is in r33's cheat sheet, but here:

Show Speed on instrument cluster via switching BC button:
Dekombi > 3000 > BC_DIGITAL_V > change from nicht_aktiv to aktiv

You do not need to have the 6WB cluster for this. However, there is no way to have it appear in larger font anywhere else. For a big number display, the 6WB shows it only in Sport Mode. No other cluster can do this. Here's a general video of where the BC_DIGITAL_V coding appears:

The BC Digital Velocity is also shown here in my 6WB cluster (enabled by default).

[igorsvrub]

Opasha

Want to buy token and tried to send message to guy which you mentioned in your initial message but somehow something wrong with e-mail.
Could you please tell me what is wrong???