6WB retrofit error when inject CAFD

[onel]

Hallo my name is Onel from Indonesia, i've just retrofitted 6WB on F15, but i'm having problem when try to inject CAFD, there was error when i detect CAF for SWE, the error is "failed to get CAFs for SWF "swfl_000016e5-004_200_003".
try to flash Dkombi also error "Generate SVT_Ist failed", cannot read SVT, Read ECU OK, I'am using esys 3.27.1, with full latest PSDZ version. anyone help me please...

[MrTookies]

Originally Posted by onel

Hallo my name is Onel from Indonesia, i've just retrofitted 6WB on F15, but i'm having problem when try to inject CAFD, there was error when i detect CAF for SWE, the error is "failed to get CAFs for SWF "swfl_000016e5-004_200_003".
try to flash Dkombi also error "Generate SVT_Ist failed", cannot read SVT, Read ECU OK, I'am using esys 3.27.1, with full latest PSDZ version. anyone help me please...

Your best of taking this into the coding thread, you won't get much help here as the coding thread is designed for such subjects. Hope that helps.

[RichardH]

Having exactly the same issue, any ideas?

[RED_Y_]

Make sure you have recent version of PSDZData. You should also post in this thread:
https://f15.bimmerpost.com/forums/sh....php?t=1039855
or this one:
https://f15.bimmerpost.com/forums/sh...33991&page=248

[DenBel]

Try newer esys, like 3.30.,,,

[djrjay]

Originally Posted by onel

Hallo my name is Onel from Indonesia, i've just retrofitted 6WB on F15, but i'm having problem when try to inject CAFD, there was error when i detect CAF for SWE, the error is "failed to get CAFs for SWF "swfl_000016e5-004_200_003".
try to flash Dkombi also error "Generate SVT_Ist failed", cannot read SVT, Read ECU OK, I'am using esys 3.27.1, with full latest PSDZ version. anyone help me please...

did you finally solve it?
I have exactly the same problem.
Same number.
I have ESYS 3.30 and latest PSDZDATA but this files are not here.