10-20-2015, 04:05 PM | #1 |
Major
2120
Rep 1,247
Posts |
Production Number
Good afternoon all,
Just ordered my 2016 X6 50i M sport yesterday, and got my production number this morning. I have to say I am very excited now that I know the build order has been submitted, even though this was my plan since June. Just had to wait until I got closer to my lease end date. So, I typed in my production number on the My BMW website to ensure the build is to my exact specifications. I'm a bit overly cautious at this point, because back in 2008, when I placed the order for my 2009 X6, when I finally took delivery of my car back then, there were a couple minor features that were overlooked during the build process. Not a deal breaker, I still signed for the car back then, but I can admit being disappointed about the features I checked off that never made it to my car back then. Which brings me to my point. After typing in my production number today, I can see that the exterior color is not what I ordered yesterday. Should I be paranoid at this point, or is it too early to assume that my order is already being ruined? Have any of you experienced a jacked up order after going to pick up your new car, only to find that it's not completely what you ordered? I only ask because I can reluctantly accept my future car if it had a minor oversight, but something like getting the exterior color wrong would make me turn away and tell them to start over. In fact, I am so particular about my next X6, that I believe that I would send them back to drawing board if I noticed any of my ordered options were neglected. What are your thoughts?
__________________
Too smart for my own good...
|
10-20-2015, 05:28 PM | #2 |
Captain
475
Rep 699
Posts
Drives: 2011 BMW M3
Join Date: Nov 2014
Location: Portland,OR
|
So soon to get your pr #!
__________________
2016 F15 X5 xDrive 35i Space Grey M-Sport - BM3 Tune/ER charger pipe/afe power dry panel filter.
2011 E92 M3 DCT MW - AA intake/Akrapovic slip on/Ohlins R&T/Stoptech ST60 and ST40/Underdrive Pulleys/Antigravity H6 40ah/Alpine Tune |
Appreciate
0
|
10-20-2015, 06:37 PM | #3 |
Lieutenant Colonel
309
Rep 1,806
Posts
Drives: 2016 X5 35d | 2019 X3 30i
Join Date: May 2011
Location: Toronto
|
They can't give you a wrongly ordered color...neither should you be accepting if the pull comes to shove and they actually call you to pick up your vehicle with a different color....I seriously doubt it though...just send a note to your dealer just to make sure they are on the same page with you.
I've seen folks unhappy about little and minor misses, but something as big a color??!!! I haven't heard of. Last edited by Shaw; 10-22-2015 at 10:17 AM.. |
Appreciate
0
|
10-20-2015, 07:13 PM | #4 | |
Major
2120
Rep 1,247
Posts |
Quote:
One of the main reasons I didn't go for the full M is because of some of the specifics only available to the "lesser than M" vehicles.
__________________
Too smart for my own good...
|
|
Appreciate
0
|
10-20-2015, 07:17 PM | #5 |
New Member
2
Rep 17
Posts |
Mine did the same. Was white when I got it and was properly grey a few days later. I have read that BMW recycles build numbers so I wouldn't sweat it. Get your dealer to print you out a vehicle inquiry report which shows the build color.
|
Appreciate
0
|
10-21-2015, 04:45 AM | #6 | |
Major
2120
Rep 1,247
Posts |
Quote:
I will take your advice and give it about a week before I confront the dealership, lol.
__________________
Too smart for my own good...
|
|
Appreciate
0
|
10-21-2015, 07:56 AM | #7 |
Major General
3242
Rep 5,066
Posts |
When you get your VIN# enter it in at http://bimmer.work or bmwvin.com and it should list everything on your build sheet.
Just to make you feel better, many other members here and other forums have experienced the same as you when they checked their car on BMW website. More than likely the car that your dealer is using was probably originally built for their lot cars. They are just using that allocation to modify for your build instead. Here are others recently who had the same concerns http://f15.bimmerpost.com/forums/sho...ght=bmwvin.com http://f15.bimmerpost.com/forums/sho...&highlight=VIN
__________________
2015 F15 X5 35i Msport Space Grey M Performance parts MPPK, MPE
|
Appreciate
0
|
10-21-2015, 08:08 AM | #8 | |
Major General
5483
Rep 8,824
Posts |
Quote:
Get the the VIN and look it up that way as well as get your dealer to email you the exact build so that way IF anything is wrong you have complete back up that they screwed up. Alan
__________________
|
|
Appreciate
0
|
10-21-2015, 12:54 PM | #9 | |
Major
2120
Rep 1,247
Posts |
Quote:
I'm just excited now, and ready for the keys, but I know it will take about 2 months for that to happen. In the meantime, I just want to rest easy k ow that when I finally get the car, it's exactly as I ordered it. Don't wanna flip over desks at the dealership, especially right around the holidays, lol
__________________
Too smart for my own good...
|
|
Appreciate
0
|
10-21-2015, 12:56 PM | #10 | ||
Major
2120
Rep 1,247
Posts |
Quote:
__________________
Too smart for my own good...
|
||
Appreciate
0
|
10-21-2015, 04:27 PM | #11 |
Enlisted Member
7
Rep 32
Posts |
Right on point guys, my 2016 F15 prod# on BMWUSA showed the wrong color but corrected itself few days later. Also to get last 7 digits of your VIN, right click on the webpage of track your build to view source code. It worked for me after learning from this article. http://www.bmwblog.com/2014/04/23/tr...rder-delivery/
__________________
2016 BMW X5 xDrive35i
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|