01-27-2016, 05:35 PM | #2091 | |
Lieutenant
279
Rep 592
Posts |
Quote:
Option 1: changes the (fold/unfold) delay time (line 52 not 49). Personally, I only did option 2 (i think its line 53 not 50). |
|
Appreciate
0
|
01-27-2016, 08:50 PM | #2092 |
2020 Mineral White 30d MSport
523
Rep 2,146
Posts
Drives: 2020 Mineral White 30d MSport
Join Date: Nov 2008
Location: San Jose
|
I just found that if I close the door with CA and hold my finger a few seconds, the mirrors fold, so I'm 50% done, what I really wanted is to fold them with just locking the car and not having to hold the key button or leave my finger until they fold
__________________
....Life is too short to drive boring cars
|
Appreciate
0
|
01-28-2016, 03:08 AM | #2093 |
Lieutenant
279
Rep 592
Posts |
My mirrors un/fold when I press the un/lock button on my remote. I didn't need to hold the button or anything unlike CA. I actually prefer that CA setting.
|
Appreciate
0
|
01-28-2016, 11:02 PM | #2094 |
Second Lieutenant
111
Rep 256
Posts
Drives: '17 F15 MSport
Join Date: Aug 2015
Location: Indianapolis
|
Mine did the same. Haven't investigated yet, but I do have to recode since I had MPPK installed so will do some checking. I want the mirrors to fold whenever the vehicle is locked, no holding buttons nonsense. Lock and fold all the time.
|
Appreciate
0
|
02-02-2016, 04:19 AM | #2095 |
Private First Class
28
Rep 193
Posts |
internet
Hallo, checked coding sheet and did not find how to code "internet access"
I mean to see it in connected drive menu, I heard it is possible... P.S. Car will be able to connect to internet via phone. |
Appreciate
0
|
02-02-2016, 07:39 PM | #2096 |
Private First Class
11
Rep 124
Posts |
Has anyone figured out how to increase the ACC timeout from 3s to something higher? Looked around and didn't find anything, really hoping this is possible.
|
Appreciate
0
|
02-03-2016, 05:08 PM | #2097 |
New Member
0
Rep 6
Posts |
Has anyone found coding for the sensitivity of the radio volume knob? I find myself having to twirl it quite a bit to get a meaningful increase/decrease in volume compared to my old e39. I know the steering wheel buttons move it more with each click but tend to reach for the knob (probably because i'm used to the radio controls being on the left on my old one...).
thanks |
Appreciate
0
|
02-03-2016, 07:33 PM | #2098 | |
Lieutenant
458
Rep 570
Posts |
Quote:
|
|
Appreciate
0
|
02-11-2016, 09:04 PM | #2099 |
Drive Different
52
Rep 225
Posts |
Successfully coded BDC_ BODY, KOMBI and HU_NBT modules. After Read ECU, I do not see HKFM, KAFAS or ICM modules. Do I need to Read SVT instead or something else?
__________________
'17 F87 M2 DCT / '16 F15 X5 X35i / '09 E82 135i 6MT*
'10 E70 X5 35d* / '05 E60 M5 SMG* / '01 E53 X5 4.4i* / '76 2002* | '70 2002* *Gone |
Appreciate
0
|
02-11-2016, 10:10 PM | #2100 |
Lieutenant
279
Rep 592
Posts |
|
Appreciate
0
|
02-11-2016, 10:15 PM | #2101 |
Drive Different
52
Rep 225
Posts |
|
Appreciate
0
|
02-11-2016, 10:26 PM | #2102 |
Lieutenant
279
Rep 592
Posts |
|
Appreciate
0
|
02-12-2016, 09:52 AM | #2103 | |
Drive Different
52
Rep 225
Posts |
Quote:
Of note, I had the driver door open during coding. The ignition was on, but the engine was not running.
__________________
'17 F87 M2 DCT / '16 F15 X5 X35i / '09 E82 135i 6MT*
'10 E70 X5 35d* / '05 E60 M5 SMG* / '01 E53 X5 4.4i* / '76 2002* | '70 2002* *Gone |
|
Appreciate
0
|
02-12-2016, 09:57 AM | #2105 |
Drive Different
52
Rep 225
Posts |
Thanks. Will try that. I connected by VIN and selected F25 as the target.
__________________
'17 F87 M2 DCT / '16 F15 X5 X35i / '09 E82 135i 6MT*
'10 E70 X5 35d* / '05 E60 M5 SMG* / '01 E53 X5 4.4i* / '76 2002* | '70 2002* *Gone |
Appreciate
0
|
02-12-2016, 10:28 AM | #2106 |
Major General
860
Rep 5,447
Posts |
Can we Sticky this - I refer to it all the time as I am sure other do, would be nice to keep it on the first page.
__________________
2022 X3M Brooklyn Grey
2008 E93 335i FBO 2012 Mercedes C63 Black Series Alanite Grey |
Appreciate
0
|
02-14-2016, 11:44 AM | #2108 |
New Member
0
Rep 6
Posts |
I'm having trouble getting my network connection. Apologies in advance as I'm a Mac guy and trying to get this sorted on an old windows xp laptop. When I connect the cable the Lan connection confirms connected. But ESys connect by VIN is greyed out. Did some searching online and believe this is a connection problem. Only think I can see is that the IP address for the connection is 192.xxx.x.x and the instructions I have indicate it should be 169.xxx.xxx.xxx. My IP address type notes it is Manually Configured. Thanks for any ideas.
|
Appreciate
0
|
02-14-2016, 12:33 PM | #2109 | |
Private
42
Rep 86
Posts |
Quote:
1. Hold down the Windows key and press R 2. In the Run prompt type "ncpa.cpl" and press Enter (this should open the Network Connections window) 3. Right click on the network connection (often named "Local Area Connection") and click on Properties 4. Select "Internet Protocol Version 4" (TCP/IPv4) and click Properties beneath it 5. Select the "Obtain an IP address automatically" option then click OK 6. Click OK again to close the individual network connection's window 7. Wait a minute or so (a process on the laptop has to time out) then check your IP address again That should get you on a 169.254.x.x address while you're not connected to any other networks. |
|
Appreciate
0
|
02-14-2016, 01:59 PM | #2110 |
New Member
0
Rep 6
Posts |
Thank you! Worked perfectly. I vaguely think i used to know that stuff but it's been years since i made the jump to Macs...
With that sorted i completed my first batch of coding: m splash, seat belt chimes off, trailer rear view camera, radio off with door open, close hatch with fob/CA. Couldn't have done it without all of you guys - thanks!. All went smoothly (thank goodness). One thing i still want to do is the folding mirror with fob. I've seen the cheat sheet and various posts here but want to confirm what's required if a) i want the mirrors to fold only if i press and hold the lock button on fob (i.e., they don't fold immediately), or b) i want them to fold immediately I see these three items in cheat sheet KOMFORT_SCHLIESSEN ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN Thanks Peter |
Appreciate
0
|
02-14-2016, 11:14 PM | #2111 | |
Lieutenant
458
Rep 570
Posts |
Quote:
https://docs.google.com/spreadsheets...p=docslist_api |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|