@opasha @skalberti @r33
so, i have been going through these for a while trying to find out .. finally able to figure out where these live.
As per F30 coding, we need to configure below values in REM.
V_SCHWELLE_1 werte = FF
V_SCHWELLE_2 werte = FF
D_SCHWELLE_1 werte = FF
D_SCHWELLE_2 werte = FF
I did a search on each CAFD and found that these are now located in PDC under 300D(PKM) section.. atleast for me. I need to code this and test it out. Will report back.
However, I didn't find codes for Front Panoramic camera in F30. So, I was digging through different modules and finally found some in iCAM module.
There is one config called
FV Panoramic Viewport in 3007 section with below comment
Kommentar=- Update the Camera Banding Filter value to 50.
- Rename the members from activationSpeedForward_kmh and activationSpeedBackward_kmh to deactivationSpeed_kmh and reactivationSpeed respectively.
- Update the deactivationSpeed_kmh to 3.6 and change the type to Float for both CTA-F and CTA-R.
Just want to get your thoughts on it.
I know these cameras coding is useless, but I just want to find something new and which is kind of fun