Today I got my 2016 X5 35i M-sport (with Lighting package) Anti-Dazzle function enabled and went out for test drive for 15 minutes and I thought Anti-Dazzle function was properly enabled this time...
I was following the simple steps which
dmnc02 gave.
Coding thread here:
http://f15.bimmerpost.com/forums/sho...k+door&page=90
The software versions I used listed at below:
E-SYS: 3.27.1
E-Sys Launcher Premium: V2.5.3.108.
PSdZData: V.58.2_PSdZData_Lite.
Vehicle: 2016 X5 Xdrive 35i M-Sport (built Oct.2015)
Previously I followed the V2 PDF steps to program 22+79 and it didn't make the Anti-Dazzle function worked as expected. If you have a 2016 X5 35i with LED then you can follow this simple steps for a try. Luck that your car will be Anti Dazzle enabled!!!
Quote:
Originally Posted by dmnc02 View Post
In case somebody else with a 2016 wants to try activating Anti-Dazzle as 08bmw128i did, I posted the relevant coding on the other forum (http://www.bimmerfest.com/forums/sho...&postcount=925), but it might be worth repeating here:
STEP 1
Remove 5AP and 8S4 from FA and VO code BDC_BODY, FLA or KAFAS (whichever is present) and both FLEs.
STEP 2
FDL code the following 5 parameters in both FLEs:
Stadt_V_Idx: F015Wert = 04 01 01 01 02 03 01 01 05 01
SAE_Idx: F015Wert = 04 01 01 01 02 03 01 01 01 01
H_plus4_Idx: F010Wert_SA552_US = 04 01 01 01 02 03 01 01 01 01
Blendfreies_Fernlicht_Idx: F015Wert = 01 06 01 01 06 06 01 01 01 01
Volles_Fernlicht__Lichthupe_Idx: F015Wert = 07 07 01 01 07 07 07 01 01 01
NOTE
The above requires adaptive LEDs (option code 552) and High Beam Assistant (5AC). It also requires a 2016 model with the new FLE ECUs for the headlights.
|
If you coded your car before, please don't VO code BDC_BODY (that will erase all coding you have done), Just VO code both FLEs then followed the step 2 above.
Thanks
dmnc02 and
08bmw128i