Quote:
Originally Posted by masa52
what for you want to remove centre console???
look for the diagram and all should be clear for you
 |
Yeap i have the same diagram. As you see here ICM and KAFAS2 gets connected thru S Can H and L from the ACC sensor, So ICM is located under the center console. And you have to reach to the ICM 32 and 33 pins in order to make the connection. If ICM already have the Pin 32 and 33 feeded then yes you dont have to remove the console you can simply find this S CAN cables thru junction box controller and tap them. But if there is no cable routed there you have to remove the console.