Quote:
Originally Posted by scotty339
Since you dont have the OEM BMW harness, you won't have the 4 pin trailer brake controller hookup. Your Tenkosha wiring harness is installed a very different way than the OEM harness.
The CANBUS 2 pin connector is what is hidden in the wiring loom that you have to dig for, IF installing the OEM harness.
Looking at this picture of the OEM Harness -
https://c1552172.ssl.cf0.rackcdn.com/710004_x800.webp
You can see at 4:30 (lower right corner) the 4 pin hookup for the trailer brake controller.
You'll have to tap some wires for your trailer brake controller. In regards to the electrical, I am unsure.
Good luck! |
Thanks so much! This helps a lot. I'll look into it and I'll let you know of my success. If anyone else has ideas, please let me know.
Cheers,