One of the nice design elements featured on BMW M models is the menacing shadow-line black trim. Unfortunately, BMW always leave a few key elements in the standard chrome finish. In continuation of supplanting the BMW chrome accents, one of the first area we decided to address was the chrome BMW roundel housing. This piece is a fairly quick DIY and results in creating a more cohesive look on the F15/F16/F85/F86.
Tools required for this job are follows:
• Painters tape
• Bondo spreader
• Nylon pry tool
• Detail spray
• Adhesive remover
Available for purchase on our website:
https://ind-distribution.com/product...D-F85-HROUNDEL
1. The first and very important step is to protect the vehicle paint. This is done with painters tape from your local auto parts store or hardware store. Once you have the tape, the idea is to create a barrier between the paint and the factory roundel trim.
2. The factory roundel is secured via two tabs as well as a ring of double-sided tape. The double-sided tape is doing most of the work. Carefully place the nylon pry tool in between the body and the roundel trim.
3. Once the roundel is slightly lifted, place the bondo spreader under the roundel and begin to work its way around the circumference of the roundel while slightly lifting the roundel. This will release the double-sided tape.
4. After the tape has been separated from the body, carefully pull on the roundel to release the two tabs. Make sure to keep the factory grommets as you will use them with the new painted roundel.
5. There will be some leftover residue from the double-sided tape. You can remove this with your fingers and a small dab of adhesive remover. Make sure the area is clean and dry before installing the new roundel.
6. Now you can remove the painters tape and clean the surface with a clean microfiber and detail spray.
7. Your replacement roundel trim has pre-installed double-sided tape ready to go. Simply remove the paper covering and guide the trim into place. Apply light pressure around the roundel to promote adhesion between the double-sided tape and the body.
8. Take a step back and admire your work. Please contact us if you have any questions regarding the install.
