installed over the weekend, so offering some additional tips. its a really impressive hitch, the instructions are perfect, and the wiring harness is very impressive. all oem.
1. when you pull off the side valances the 4th tab, a white piece, will pop off. remove it from the car and slip it into its groove on the valance. easier to install that way.
2. you need an 18 or 19mm deep socket to get the bolts off.
3. my design for the trailer pin connector was different, and it sits up behind the bumper. really tight fit, but no cutting needed.
4. after the wiring was complete i got a trailer light warning. im hoping the wiring isnt messed up, and it just needs coding, but i cant find the codes for this, only the zoom. so, tbc.
5. run the wiring harness before the bumper/hitch is installed. its easier to route everything behind it.
|