Quote:
Originally Posted by r33_RGSport
FamilyMan , you need to set the car into dyno mode.
You do it from the instrument cluster trip reset button.
I don't have my F15 with me, so I this is the step on my 650GC with 6WB.
You hold it for 10 seconds, release and hold again for 10 seconds and it will show you the service reset menu, kept on pressing, then to the internal menu will show up. If it asking for unlock code, then unlock it with the sum of your last 7 of VIN.
Single press to cycle the menu, press and hold for selecting the menu.
Cycle through the menu until you see the Rolling Test menu or ESC (Off) menu then press and hold to confirm.
|
Here are the options I see:
1. Identification
2. System Test
3. Start Roller
4. Test End
10. Unlock
Do you know which one I should select?