Quote:
Originally Posted by MikeM6
Quote:
Originally Posted by JRock80
Finally got around to doing the brakes myself. Started with the passenger side - took longer than I wanted. However, the driver side was a breeze after figuring out the correct process.
Also, I was able to do a decent bedding process. 80-20 8 times without coming to a complete stop.
It's been about 2 weeks and I'm very happy I did this! Dust is barely noticeable and squealing GONE.....
|
Which screws did remove to disassemble the front caliper? I've seen people remove the 2 internal Torx screws that pass through the caliper (fasten caliper to mounting bracket), which is a no-no according to TIS, or the 2 external Torx screws that attach the mounting bracket to the steering knuckle (TIS procedure).
Did you use BMW recommended Plastilube on the front pads or something else? Thanks. |
11 - External Torx-Bolts
09 - Bracing Spring
06 - Guide Pins
I used the Brake-Pad paste provided by PowerStop.