Quote:
Originally Posted by JohnG123
See the thread above. You need the small screws that go in as an angle the head of the 4 screws holds it in place. The F86 fixing are different than the F85.
|
I don't get it. Where exactly are the screws to go in at an angle? The only thing I can think of is install the unit and screw into the tabs from behind the fender to hold the tabs in place and thus prevent the grill from sliding off the fender (see the TIS pic). I don't see any other function of the damn screws. If I had 3M tape, I'd just tape the grill. This is the OEM X6M black grill. TIS instructions does not mention the damn screws - just says to clip the grill in.