Quote:
Originally Posted by pits200
Does you know the coding specific to this upgrade?
|
Hey pits200, mine was done by indy shop, so I don't know it exactly, but from previous threads this is what is required if you are doing it yourself:
For those interested in coding your F15 for larger brakes...here is the instructions I followed. Huge thanks to Shawnsheridan for figuring out the code for the F15 being SBRE. For the F30 its SPBR.
This is how you code for Big brake kits for the car. This is REQUIRED or you will have mushy brakes after installing the brakes. Got this from another thread....
=> Connect
=> Expert Mode
=> Coding
=> Read FA
=> Save FA
=> Editors and viewers
=> FA-editor
=> Go to HO-Wort and right click on "Edit," then type SBRE under the HO-Wort file
=> Select the FA, "Calculate FA" to verify that no errors are found after adding the SBRE.
=> Write (write) FA to your car. No confirmation window will appear after saving the FA to the car
=> Expert Mode
=> Coding
=> Read (read) the FA. You are able to see SBRE be added to the HO-Wort folder on your car.
=> Read SVT, and locate the "DSC" (File Folder SVT / ECU / DSC), then right-click the "DSC" folder and select "Code". Consolidation should start immediately.
=> Allow the coding is over, and repeat step 1 to save a copy of the new FA.
=> Disconnect the car's computer.
The M-Performance brake is now activated and enjoy the authentic experience of M Performance brake.
Here's the link to original post by Alan:
http://f15.bimmerpost.com/forums/sho...1178827&page=2