If it’s just the button (not the panel)…probably not an issue other than what’s written on the button. If the new cover will be pressing the same existing button..nothing would change. It could have EJECT written on the new cover…but if it was pressing the button that changed between am/fm/satellite….that’s what pressing the button would do even though it says EJECT.
I would recommend using the correct 11 digit BMW part nbr when shopping for parts. This helps when there are changes during the production run. Sometimes things can change slightly…and by using your VIN to pull up the diagram…you can click on the correct part number which will open the part cross reference feature. If older parts are acceptable…it will be listed as retroactively exchangeable.
If you’re not familiar with any of these databases..two of the best are
www.realoem.com or
www.bimmercat.com … just enter your VIN, then go to the electrical diagrams for the button kit you seek, then select the diagram/part number based on your installed options. Once you have the correct part number, click on it to see the part cross reference to see if you can use different parts.
You can then also shop online using the correct part nbrs (ie
BMW xx xx x xxx xxx {where x=the actual part nbrs})
This is as far as I can go because you didn’t give any model year info…and there are date ranges (up to & from) in the part database…instead of uploading incorrect data…you’ll have to enter your VIN to find which part numbers are compatible.
