|
Unrelated I continue to have difficulty with getting the wheel gap exactly how I want it - I had the exact same issue with the H&R VTF where the front passenger side won't get as low as the driver side.
I have the front driver at 29.75" ground to fender and there are 3 full threads left to go lower. The front passenger is at 30.25" ground to fender and there is only 1/2 thread left to go lower. I can't explain this but it was exactly the same with both suspensions.
The rears are both at 30.25" ground to fender but the passenger side wheel gap is a full 1.5 finger wheel gap bigger.
Soooo is it possible the passenger side of the car has slightly different angled fenders or the fenders are slightly higher than the driver side? It's driving me crazy, I can't figure it out.
|