|
Unlock doors on engine stop not working
While I've coded via ESys before, I decided to give the Bimmercode a try in the interest of saving time - which it definitely does (at least for me).
Anyway, I am unable to get the "Unlock doors upon engine shut off" to work. Bimmercode gives me the option, which I set to "Active" and it still doesn't unlock the doors when I shut the truck off. I've even tried going into advanced mode to look for these two codes:
Unlock when STOP Engine (older software) BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK nicht_aktiv aktiv
Unlock when STOP Engine (newer software) BDC_BODY CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING nicht_aktiv aktiv
Neither of these codes is listed under section 3040.
I opened a support ticket with Bimmercode, but Stephan didn't see anything in the logs that could explain why this wasn't working. I can try coding this via ESys, but if the Advanced mode of Bimmercode didn't see the lines for this option, doesn't that mean ESys won't see this either?
X5 is a 2016 model with a September, 2015 build date.
Anyone have any ideas?
|