Quote:
Originally Posted by Alan l.
For those interested in coding your F15 for larger brakes...here is the instructions I followed. Huge thanks to Shawnsheridan for figuring out the code for the F15 being SBRE. For the F30 its SPBR.
This is how you code for Big brake kits for the car. This is REQUIRED or you will have mushy brakes after installing the brakes. Got this from another thread....
=> Connect
=> Expert Mode
=> Coding
=> Read FA
=> Save FA
=> Editors and viewers
=> FA-editor
=> Go to HO-Wort and right click on "Edit," then type SBRE under the HO-Wort file
=> Select the FA, "Calculate FA" to verify that no errors are found after adding the SBRE.
=> Write (write) FA to your car. No confirmation window will appear after saving the FA to the car
=> Expert Mode
=> Coding
=> Read (read) the FA. You are able to see SBRE be added to the HO-Wort folder on your car.
=> Read SVT, and locate the "DSC" (File Folder SVT / ECU / DSC), then right-click the "DSC" folder and select "Code". Consolidation should start immediately.
=> Allow the coding is over, and repeat step 1 to save a copy of the new FA.
=> Disconnect the car's computer.
The M-Performance brake is now activated and enjoy the authentic experience of M Performance brake.
|
I am unable to get SVT to read. I read this was common issue with F15. I tried reading ECU and then coding all the green boxes after completing the previous steps. When I go back to read FA it doesn't appear that it saved the SBRE. Anyone have any suggestions? Thanks.
Edit: I am running Esys 3.27.1 with Launcher PRO V2.8.2.162
Edit 2: Found the solution in the following thread by Mr.47. Thanks!
https://f15.bimmerpost.com/forums/sh...php?p=24474325