|
Hello, All the stereo shop did was hook the speaker up the original speaker and then for the led and power up and power down just snaked the wires down and hooked them into the fuse box.
By relay I was just saying they connected it to a fuse with a “add a fuse” and tapped into a fuse block that turns on and off when the car is powered on and off.
It took them 15 or 20 minutes to power it up,
The hardest part was cutting the dash for the speaker.
I’d have to take off the fuse cover to show you whitch one they used.
But you don’t need to remove any panels.
Just remove the fuse box panel under the dash. And just fish the speaker wire from the top, Super simple
|