Quote:
Originally Posted by texasrr
That looks mint and really helpful. When the car hits a dip, does the tire jam into the outer wheel well or clear?
That looks to be the perfect set up if you lower the vehicle and has more sidewall on the tire than I expected. I'm more than likely not going to lower mine, so the thin sidewalls will look goofy. Good to know they sit flush with the following math:
Front: 97mm of poke
Rear: 121.7 mm of poke
My new issue now is the tire manufactures require a minimum wheel width spec of 9.5" to 11" for a 285/35r22 or 295/30r22. Most aftermarket wheels I've found are 22x9. Does anyone have any experience of fitting those 2 tire sizes to a 22x9?
|
285 will look flush to the rim with a 22x9 setup