BMW Coding Thread

caio123 · 02-12-2024, 12:23 AM

Quote:

Originally Posted by shawnsheridan

It depends on if you are using BU as standalone Coding App or with E-Sys, but either way, you need to Read BDC, and it will open up in FDL Editor, where you can search and change FDL Codes.

BU standalone, on FDL editor there are to many entries with no description, don't have a clue in what to change. There are no information on XML cheat sheet either.

shawnsheridan · 02-12-2024, 12:25 AM

Quote:

Originally Posted by caio123

BU standalone, on FDL editor there are to many entries with no description, don't have a clue in what to change. There are no information on XML cheat sheet either.

What is the name of BDC CAFD?

caio123 · 02-12-2024, 12:41 AM

Quote:

Originally Posted by shawnsheridan

what is the name of bdc cafd?

cafd-000017be-042.100.099 - codingdata body appl

shawnsheridan · 02-12-2024, 12:35 PM

Quote:

Originally Posted by caio123

cafd-000017be-042.100.099 - codingdata body appl

You do not see anything like this?

caio123 · 02-12-2024, 11:24 PM

Quote:

Originally Posted by shawnsheridan

You do not see anything like this?

Yes, but without comments.
On BU should I use decimal values ?
On the drop down menu of these itens I don't see decimal values.

Thanks.

shawnsheridan · 02-13-2024, 12:03 AM

Quote:

Originally Posted by caio123

Yes, but without comments.
On BU should I use decimal values ?
On the drop down menu of these itens I don't see decimal values.

Thanks.

Sorry, I do not understand what you ask about Decimal Values. Post same picture as mine from your BU.

zillarino · 02-15-2024, 09:40 AM

Hey shawnsheridan could you send me the link for ESYS + psdzData LITE (Assuming I don't need the full one from what the original post mentions)? I have a 2014 F15 50i and I need to flash the AAG Trailer Control Module on my vehicle.

shawnsheridan · 02-15-2024, 09:47 AM

Quote:

Originally Posted by zillarino

Hey shawnsheridan could you send me the link for ESYS + psdzData LITE (Assuming I don't need the full one from what the original post mentions)? I have a 2014 F15 50i and I need to flash the AAG Trailer Control Module on my vehicle.

PM sent.

Stamps · 03-17-2024, 03:18 PM

Is it possible to code the fog lights to turn on automatically with low beams?

And/or code the fogs to stay on when high beams are turned on?

Breezer88 · 03-25-2024, 03:19 PM

Hi Shawn,

Can you send me the download links for e-sys and instructions for the latest. I had v 2.8 but it kept failing also stating token invalid and no certs found. Also, what are the latest PC requirements.

Thanks, Mike

shawnsheridan · 03-25-2024, 05:21 PM

Quote:

Originally Posted by Breezer88

Hi Shawn,

Can you send me the download links for e-sys and instructions for the latest. I had v 2.8 but it kept failing also stating token invalid and no certs found. Also, what are the latest PC requirements.

Thanks, Mike

PM sent.

cals · 04-13-2024, 01:03 PM

Hi Shawn -
Could you please send me the links for the diagnostic software?
Thanks in advance for your help

shawnsheridan · 04-13-2024, 02:36 PM

Quote:

Originally Posted by cals

Hi Shawn -
Could you please send me the links for the diagnostic software?
Thanks in advance for your help

PM sent.

Waleedheno · 04-20-2024, 04:09 PM

Hi Shawn, Can you please send me the latest cheat sheet? as the google doc link in the post is not available anymore.

shawnsheridan · 04-20-2024, 04:19 PM

Quote:

Originally Posted by Waleedheno

Hi Shawn, Can you please send me the latest cheat sheet? as the google doc link in the post is not available anymore.

No. Cheat Sheets fell out of favor long ago for cheat.xml files used by LauncherPRO / BimmerUtility.

chrisnmandy · 04-24-2024, 01:21 PM

Everything seems to be flashed correctly to the AAG module but getting the following error on trailer module in BimmerCode:
802840
Power Supply KL30f left missing / interrupted

Dash screen shows:
Trailer Electrics overload:
Trailer not lit or only partially lit. Turn off electrical devices in trailier. If fault persists, consult service center.

CAFD appears flashed to AAG module

235 in HO-WORT

Used new factory retro fit wiring and new AAG module.
No trailer attached.

Any ideas. Can share any screenshots etc that may be relavant.

heavy_D · 05-05-2024, 06:41 PM

I imported an F15 from Canada and am trying to add the US State Vehicle inspection CBS as well as code default units to imperial from metric (I know I can change units in iDrive, but when profiles are reset they default to Canadian metric). I can't find either settings to code in ECUs, do I need to remove the Canadian Version VO to get these features?

jimmygks5479 · 05-09-2024, 01:02 PM

Hi Experts,

Could you guide me on how to use BimmerCode to adjust my headlight to be flat (one line without convex)like the LEFT side?

FYI. I from Malaysia.

SunjaKim · 05-09-2024, 01:07 PM

Quote:

Originally Posted by Stamps

Is it possible to code the fog lights to turn on automatically with low beams?

And/or code the fogs to stay on when high beams are turned on?

I've used BimmerCode for a good few things but struggling to find how to achieve this.

KJ4 · 05-12-2024, 10:58 AM

How can I remove the chassis function warning message? I replaced the air springs with coils.

TIA

chris11 · 05-28-2024, 03:33 PM

Hello anyone can tell me how add comfort + and eco pro + ?

Is it in BDC and NBT ?

I use esys

CatalinP · 05-29-2024, 12:00 PM

On Fxx series, you can only add them with a permanent marker.

02-15-2024, 09:40 AM	#5837
zillarino Registered 0 Rep 2 Posts Drives: BMW X5 50i 4.4L 2014 Join Date: Feb 2024 Location: Bristol, United Kingdom iTrader: (0)	Hey shawnsheridan could you send me the link for ESYS + psdzData LITE (Assuming I don't need the full one from what the original post mentions)? I have a 2014 F15 50i and I need to flash the AAG Trailer Control Module on my vehicle.
	Appreciate 0 Quote

03-17-2024, 03:18 PM	#5839
Stamps Private 8 Rep 86 Posts Drives: 2017 F85 Join Date: Sep 2018 Location: DC / Northern VA iTrader: (0)	Is it possible to code the fog lights to turn on automatically with low beams? And/or code the fogs to stay on when high beams are turned on?
	Appreciate 1 SunjaKim76.00 Quote

03-25-2024, 03:19 PM	#5840
Breezer88 Private 89 Rep 53 Posts Drives: '18 F15 N55 M-sport Join Date: Sep 2019 Location: NorCal iTrader: (0)	Hi Shawn, Can you send me the download links for e-sys and instructions for the latest. I had v 2.8 but it kept failing also stating token invalid and no certs found. Also, what are the latest PC requirements. Thanks, Mike
	Appreciate 0 Quote

04-13-2024, 01:03 PM	#5842
cals cals 17 Rep 39 Posts Drives: E34, E39, E60, F10, E70, F15 Join Date: Apr 2012 Location: Toronto iTrader: (0) Garage List 2017 BMW X5 [0.00] 2001 BMW E39 [0.00] 2004 BMW E60 [0.00] 2011 BMW F10 [0.00] 2007 BMW X5 [0.00]	Hi Shawn - Could you please send me the links for the diagnostic software? Thanks in advance for your help
	Appreciate 0 Quote

04-20-2024, 04:09 PM	#5844
Waleedheno Registered 0 Rep 1 Posts Drives: BMW X5 Join Date: Apr 2024 Location: Israel iTrader: (0)	Hi Shawn, Can you please send me the latest cheat sheet? as the google doc link in the post is not available anymore.
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

04-24-2024, 01:21 PM	#5846
chrisnmandy Registered 0 Rep 2 Posts Drives: BMW X5 F15 Join Date: Mar 2024 Location: Easley SC iTrader: (0)	Help with AAG module Everything seems to be flashed correctly to the AAG module but getting the following error on trailer module in BimmerCode: 802840 Power Supply KL30f left missing / interrupted Dash screen shows: Trailer Electrics overload: Trailer not lit or only partially lit. Turn off electrical devices in trailier. If fault persists, consult service center. CAFD appears flashed to AAG module 235 in HO-WORT Used new factory retro fit wiring and new AAG module. No trailer attached. Any ideas. Can share any screenshots etc that may be relavant.
	Appreciate 0 Quote

05-05-2024, 06:41 PM	#5847
heavy_D Enlisted Member 51 Rep 41 Posts Drives: F15 35d daily, Q5 TDI wife's Join Date: May 2023 Location: Boston iTrader: (0)	I imported an F15 from Canada and am trying to add the US State Vehicle inspection CBS as well as code default units to imperial from metric (I know I can change units in iDrive, but when profiles are reset they default to Canadian metric). I can't find either settings to code in ECUs, do I need to remove the Canadian Version VO to get these features?
	Appreciate 0 Quote

05-09-2024, 01:02 PM	#5848
jimmygks5479 Registered 0 Rep 2 Posts Drives: BMW X5 F15 Join Date: Feb 2024 Location: Malaysia iTrader: (0)	Hi Experts, Could you guide me on how to use BimmerCode to adjust my headlight to be flat (one line without convex)like the LEFT side? FYI. I from Malaysia. Attached Images
	Appreciate 0 Quote

05-12-2024, 10:58 AM	#5850
KJ4 New Member 12 Rep 28 Posts Drives: 2017 X5 35i Join Date: Mar 2020 Location: NYC/CT iTrader: (0)	How can I remove the chassis function warning message? I replaced the air springs with coils. TIA __________________ 2013 335i xdrive (pwg): BMW MPE, BMS Chargepipe, BMS Wheel Spacers 10/12, BM3 tune, M performance Calipers, Qi wireless charger, Bilstein B4 EDC suspension, Eibach Pro Springs + F80 bumpstops, Zimmermann Formula F rotors, Active Autowerke FMIC
	Appreciate 0 Quote

05-28-2024, 03:33 PM	#5851
chris11 New Member 0 Rep 27 Posts Drives: X5 F15 2018 Join Date: Sep 2012 Location: France iTrader: (0)	Hello anyone can tell me how add comfort + and eco pro + ? Is it in BDC and NBT ? I use esys
	Appreciate 0 Quote

05-29-2024, 12:00 PM	#5852
CatalinP Major 594 Rep 1,270 Posts Drives: BMW X5 F15 2014 3.0xd Join Date: Aug 2017 Location: RO iTrader: (0)	On Fxx series, you can only add them with a permanent marker.
	Appreciate 0 Quote