| 05-05-2024, 07:12 PM | #1 |
|
Captain
 248
Rep 644
Posts |
Anyone done this? I think I’m getting too much flex in the center bearing support causing some weird noises under moderate throttle at low speeds. I was going to take it off and do a minor overhaul replacing both guibos, a new center shaft bearing, and an upgraded JXB Performance center bearing support.
Thanks.
__________________
2017 X5M, Donnington Grey, Aragon Brown
Eisenmann Pro, Dinan Intake, BM3 Stage 1, XHP Stage 3 21" Vossen VFS-1 on Michelin PSS |
| 05-06-2024, 07:58 PM | #3 |
|
Captain
248
Rep 644
Posts |
Meh, not quite the same. Per RealOem, there are two flex discs and it looks like the insert nut and flange on the read diff doesn’t need to come off if just the driveshaft is coming off.
https://www.realoem.com/bmw/enUS/sho...diagId=26_0279
__________________
2017 X5M, Donnington Grey, Aragon Brown
Eisenmann Pro, Dinan Intake, BM3 Stage 1, XHP Stage 3 21" Vossen VFS-1 on Michelin PSS |
|
Appreciate
0
|
| 05-06-2024, 09:23 PM | #4 |
|
Major
 
371
Rep 1,038
Posts |
interesting, the other diagram does not have the guibo for the rear.
https://www.realoem.com/bmw/enUS/sho...diagId=26_0280 Does it actually have the guibo on the diff side? Not near the car, so cant stick head under to look. |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
