BMW Coding Thread

shawnsheridan · 05-16-2016, 10:06 AM

Quote:

Originally Posted by NoJoke

May I please get the link(s) for the latest E-sys and PSdZData? Thanks. Great hacks available, excited to try.

PM sent.

spike5150 · 05-16-2016, 11:32 AM

Quote:

Originally Posted by spike5150 View Post

Am I reading this correctly - the latest coding sheet seem to imply that you can enable SAT and Launch Control with only FDL coding now?

Quote:

Originally Posted by shawnsheridan

PM's sent.

Sorry Shawn - didn't see a PM from you regarding the FDL coding of SAT and Launch Control question.

Did get the new software links, though - thanks again.

shawnsheridan · 05-16-2016, 11:34 AM

Quote:

Originally Posted by spike5150

Quote:

Originally Posted by spike5150 View Post

Am I reading this correctly - the latest coding sheet seem to imply that you can enable SAT and Launch Control with only FDL coding now?

Sorry Shawn - didn't see a PM from you regarding the FDL coding of SAT and Launch Control question.

Did get the new software links, though - thanks again.

SAT and Launch Control should be codeable, at least for any .35i or .50i (not sure about .28i) so long as car has high enough firmware level.

JM71 · 05-16-2016, 03:55 PM

Can someone please confirm whether the instructions in the following link are the latest and greatest on coding VLD and GFHB (anti-dazzle) for 2016 X5M (F85).

http://www.bmwesys.com/guides/Euro%2...20How%20To.pdf

Thanks!

Almaretto · 05-16-2016, 05:16 PM

Quote:

Originally Posted by JM71

Can someone please confirm whether the instructions in the following link are the latest and greatest on coding VLD and GFHB (anti-dazzle) for 2016 X5M (F85).

I would check out Anti-Dazzle Solved for crossovers (F15/F16/F85/F86). I believe the link you referenced is more for F3x (3-series, 4-series) and F8x (M3, M4s)

Also note: For X5M = E-Sys Launcher (F085), E-Sys Target (F025)

EDIT: Removed posted PDF to avoid confusion

JM71 · 05-16-2016, 05:34 PM

Awesome! That document has a more recent date too and is specific to my model. Thanks!

marks17 · 05-16-2016, 05:55 PM

Team,

Can I please get the links for the latest E-sys and PSdZData?

Thanks

dmnc02 · 05-16-2016, 06:04 PM

Quote:

Originally Posted by Almaretto

I would check out the attached for crossovers. I believe the link you referenced is more for F3x (3-series, 4-series) and F8x (M3, M4s)

For the sake of avoiding confusion, please do not repost the PDF and instead reference the post in the related thread on this forum: Anti dazzle solved

This makes it much easier to keep track of updates.

shawnsheridan · 05-16-2016, 06:17 PM

Quote:

Originally Posted by marks17

Team,

Can I please get the links for the latest E-sys and PSdZData?

Thanks

PM sent.

opasha · 05-16-2016, 06:35 PM

Quote:

Originally Posted by dmnc02

For the sake of avoiding confusion, please do not repost the PDF and instead reference the post in the related thread on this forum: Anti dazzle solved

This makes it much easier to keep track of updates.

Agreed, which is why the OP has been updated at the bottom to reflect this

.

dmnc02 · 05-16-2016, 06:41 PM

Quote:

Originally Posted by opasha

Agreed, which is why the OP has been updated at the bottom to reflect this

.

That PDF on the BMWESys website (which is outdated) has created a lot of unnecessary confusion for F80 owners.

JM71 · 05-16-2016, 10:15 PM

I'm using the Anti-Dazzle thread now as reference. Thanks.

One other (hopefully not too stupid) question. Is Variable Light Distribution (VLD) included in the coding for GFHB/anti-dazzle as describe in the pdf?

Almaretto · 05-17-2016, 12:24 AM

Quote:

Originally Posted by dmnc02

For the sake of avoiding confusion, please do not repost...

Quote:

Originally Posted by opasha

Agreed, which is why the OP has been updated at the bottom to reflect this

.

Quote:

Originally Posted by dmnc02

That PDF on the BMWESys website (which is outdated) has created a lot of unnecessary confusion for F80 owners.

No problem. I edited to reference single post with pdf. The Anti-Dazzle Solved OP suggests, without a link to thread or posted, to check out Coding thread and I could not find link by searching. When I originally wrote message, the Coding Thread OP had Copy Cloud links which no longer worked.

I imagine the BMWE-sys pdf created confusion. I noticed there was only one reference to F030 standing for F030_F32/F33/F36/F80/F82/F83. I was just looking at chassis designations and was not sure why M5 was grouped with 5-series (F10) much like M6 with 6-series (F12). However, M4, X5M, and X6M were given F8x designations rather than grouping with their respective counterparts.

Almaretto · 05-17-2016, 12:40 AM

Quote:

Originally Posted by JM71

Is Variable Light Distribution (VLD) included in the coding for GFHB/anti-dazzle as describe in the pdf?

Yes, it is for both VLD and GFHB. Part of the coding removes the following two parameters, which stand for:

8S4 Decoding VLD
5AP Decoding GFHB

737flyer · 05-18-2016, 07:59 PM

Dealer uddated my software, lost some of my coding. Please pm the latest software and coding data sheet
thanks

shawnsheridan · 05-18-2016, 08:00 PM

Quote:

Originally Posted by 737flyer

Dealer uddated my software, lost some of my coding. Please pm the latest software and coding data sheet
thanks

PM sent.

GrabacrOne · 05-18-2016, 10:08 PM

@shawnsheridan I need to recode my X5. Could you please send the latest software and data sheet? Thanks!

googoogaga · 05-18-2016, 11:29 PM

could anyone tell me what I am doing wrong when I get this error;
psdz error no fp could be generated from FA "". [c002] no fa2fp known for entwicklungsbaureihe f015 [858]

This is when I go into coding --> fa ---> right click + activate

Almaretto · 05-19-2016, 01:24 AM

Quote:

Originally Posted by googoogaga

could anyone tell me what I am doing wrong when I get this error;
psdz error no fp could be generated from FA "". [c002] no fa2fp known for entwicklungsbaureihe f015 [858]

This is when I go into coding --> fa ---> right click + activate

Is this or this what you are getting?

googoogaga · 05-19-2016, 02:01 AM

Quote:

Originally Posted by Almaretto

Is this or this what you are getting?

http://f30.bimmerpost.com/forums/sho...postcount=7650

so my issue is with PSdZData?
My steps were extracting the file then copy pasting the psdzdata folder to c:/data, so the software can't find the folder/files?

Almaretto · 05-19-2016, 05:11 PM

Quote:

Originally Posted by googoogaga

http://f30.bimmerpost.com/forums/sho...postcount=7650

so my issue is with PSdZData?
My steps were extracting the file then copy pasting the psdzdata folder to c:/data, so the software can't find the folder/files?

I am not sure. I had never seen that error before. I was curious, so I ran quick search and found those two postings. It seemed one suggestions was that it could be something to do with either the copy of Psdzdata (eg, incorrectly installed with merged versions or read-only or blocked Psdzdata causing corrupted files). Another was that it could have something to do with a modified and unaccepted change to FA/VO. Once again, I am not exactly sure of the cause but thought I would share until someone more knowledgeable chimed in.

shawnsheridan · 05-19-2016, 05:21 PM

Quote:

Originally Posted by BMWMacht

@shawnsheridan I need to recode my X5. Could you please send the latest software and data sheet? Thanks!

PM sent.

05-16-2016, 03:55 PM	#2424
JM71 Private First Class 21 Rep 100 Posts Drives: P911 Join Date: Aug 2009 Location: Birmingham iTrader: (0)	Can someone please confirm whether the instructions in the following link are the latest and greatest on coding VLD and GFHB (anti-dazzle) for 2016 X5M (F85). http://www.bmwesys.com/guides/Euro%2...20How%20To.pdf Thanks!
	Appreciate 0 Quote

05-16-2016, 05:34 PM	#2426
JM71 Private First Class 21 Rep 100 Posts Drives: P911 Join Date: Aug 2009 Location: Birmingham iTrader: (0)	Awesome! That document has a more recent date too and is specific to my model. Thanks!
	Appreciate 1 Quote

05-16-2016, 05:55 PM	#2427
marks17 Registered 0 Rep 4 Posts Drives: BMW 435i GP 2015 Join Date: Jun 2005 Location: Colorado iTrader: (0)	Team, Can I please get the links for the latest E-sys and PSdZData? Thanks
	Appreciate 0 Quote

05-16-2016, 10:15 PM	#2432
JM71 Private First Class 21 Rep 100 Posts Drives: P911 Join Date: Aug 2009 Location: Birmingham iTrader: (0)	I'm using the Anti-Dazzle thread now as reference. Thanks. One other (hopefully not too stupid) question. Is Variable Light Distribution (VLD) included in the coding for GFHB/anti-dazzle as describe in the pdf?
	Appreciate 0 Quote

05-18-2016, 07:59 PM	#2435
737flyer New Member 0 Rep 6 Posts Drives: 2014 X5 35i Join Date: Feb 2011 Location: Tampa iTrader: (0)	bmw coding Dealer uddated my software, lost some of my coding. Please pm the latest software and coding data sheet thanks
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

05-18-2016, 10:08 PM	#2437
GrabacrOne Second Lieutenant 178 Rep 274 Posts Drives: F10 535i Join Date: May 2013 Location: CT iTrader: (1)	@shawnsheridan I need to recode my X5. Could you please send the latest software and data sheet? Thanks! __________________ Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #578262 as a referral. F10 535i M-Sport \| Gone but not forgotten: G01 X3 xDrive30i M-Sport; F15 X5 xDrive35i; E70 X5 4.8i
	Appreciate 0 Quote

05-18-2016, 11:29 PM	#2438
googoogaga Registered 0 Rep 4 Posts Drives: BMW F15 Join Date: Mar 2016 Location: Sydney Australia iTrader: (0)	could anyone tell me what I am doing wrong when I get this error; psdz error no fp could be generated from FA "". [c002] no fa2fp known for entwicklungsbaureihe f015 [858] This is when I go into coding --> fa ---> right click + activate
	Appreciate 0 Quote