BMW Coding Thread

joo · 03-06-2016, 08:55 AM

Quote:

Originally Posted by shawnsheridan

You shold be VO Coding this with 2VB and not FDL Coding it, and you should have RDC Module. When you Read ECU (not SVT), you should have RDC. If you do not, something is not right at the hardware level.

Many Thx Shawn, re-coding everything by adding 2VB and found out below are the difference when changing FTMS to TPMS

HU_NBT --> RDC --> nicht_aktiv [00] --> aktiv [01]
HU_NBT --> RDC_DRUCK_TEMP --> nicht_aktiv [00] --> druck [01]
HU_NBT --> RDC_FORTSCHRITTSANZEIGE --> nicht_aktiv [00] --> aktiv [01]
HU_NBT --> REIFENUEBERWACHUNG_RDC_RPA --> rpa [01] --> rdc [02]
HU_NBT --> RPA --> aktiv [01] --> nicht_aktiv [00]

DKOMBI --> DSC_MIT_RPA --> mit_RPA [01] --> ohne_RPA [00]

ICM --> QdmRdcDep --> noRDC [00] --> isRDC [01]

DC2 --> Funktion_ReifenPannenerkennung_aktiv --> aktiv_RPA mit Koordinatorfunktion im DSC [02] --> aktiv_RDCi mit Koordinatorfunktion im DSC [03]

BDC BODY --> RC_RDC_ENABLE --> nicht_aktiv [00] --> aktiv [01]

shawnsheridan · 03-06-2016, 12:35 PM

Quote:

Originally Posted by nyquistcondition

Shawn, is 55.1 still the latest? Can you pm if not? Thanks.

No, 58.0 is latest. PM sent.

Analyst · 03-06-2016, 02:05 PM

Quote:

Originally Posted by shawnsheridan

No, 58.0 is latest. PM sent.

Could I please also get these?

Thanks in advance.

shawnsheridan · 03-06-2016, 02:11 PM

Quote:

Originally Posted by Analyst

Could I please also get these?

Thanks in advance.

PM sent.

Maxipes · 03-07-2016, 03:44 PM

Hi Shawn! After recent software update at BMW service I started coding from scratch.
Everything was well, but after I changed the values and get back to CAFD folder to Code FDL it gave a window with message:
ABORT!
ASYNCHRONE PROGRAMMING FAILED! [C049]
TASK EXTENSION CONFIGURATION MISSING IN CONTAINER - MAYBE THE TEMPLATE IS TOO OLD [1906]
and then click CLOSE and another message with PSdZ Error saying the same:
ABORT!
ASYNCHRONE PROGRAMMING FAILED! [C049]
TASK EXTENSION CONFIGURATION MISSING IN CONTAINER - MAYBE THE TEMPLATE IS TOO OLD [1906]
Any thoughts? What should I do?
Thanks,

shawnsheridan · 03-07-2016, 05:10 PM

Quote:

Originally Posted by Maxipes

Hi Shawn! After recent software update at BMW service I started coding from scratch.
Everything was well, but after I changed the values and get back to CAFD folder to Code FDL it gave a window with message:
ABORT!
ASYNCHRONE PROGRAMMING FAILED! [C049]
TASK EXTENSION CONFIGURATION MISSING IN CONTAINER - MAYBE THE TEMPLATE IS TOO OLD [1906]
and then click CLOSE and another message with PSdZ Error saying the same:
ABORT!
ASYNCHRONE PROGRAMMING FAILED! [C049]
TASK EXTENSION CONFIGURATION MISSING IN CONTAINER - MAYBE THE TEMPLATE IS TOO OLD [1906]
Any thoughts? What should I do?
Thanks,

Are you using 58.0 PSdZData Lite?

Maxipes · 03-07-2016, 06:33 PM

Yes, Shawn. v.58.0_PSdZData_Lite

Maxipes · 03-07-2016, 06:36 PM

And E-Sys 3.26

shawnsheridan · 03-07-2016, 06:38 PM

Quote:

Originally Posted by Maxipes

Yes, Shawn. v.58.0_PSdZData_Lite

PM sent.

Maxipes · 03-08-2016, 07:22 PM

Hey Shawn!
As always you're the best!
After I downloaded v.58.0_PSdZData_Lite from your direction of link and updated E-sys to 3.27 everything went nice and smooth! I coded my "baby" successfully!
Thanks a lot!
I tried your version to change setting "Ignition and radio OFF after driver door open" but it doesn't work. I changed value to "aktiv" in CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041
Any advise?

shawnsheridan · 03-08-2016, 08:02 PM

Quote:

Originally Posted by Maxipes

...I tried your version to change setting "Ignition and radio OFF after driver door open" but it doesn't work. I changed value to "aktiv" in CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041
Any advise?

I replied to your same PM. I do not know why it is not working.

Maxipes · 03-09-2016, 12:33 PM

Hi guys!
What happened to
"Unlock when STOP Engine" in BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK
Such a convenient option but doesn't have "aktiv" option on 'EDIT'
Does anybody figure yet?
I tried CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041.
It is not working...

Doanster · 03-09-2016, 01:16 PM

Quote:

Originally Posted by Maxipes

Hi guys!
What happened to
"Unlock when STOP Engine" in BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK
Such a convenient option but doesn't have "aktiv" option on 'EDIT'
Does anybody figure yet?
I tried CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041.
It is not working...

You said you coded other things successfully, but yet don't see an "aktiv" option for the auto-unlock? What options does it show? Only "nicht_aktiv"? Very strange if so.

Regarding your other question about the radio turning off after engine stop, I coded "TCM_LOGIC_R_OFF_DOOR" under section 3020 vs the one you tried.

Overall, some of these items are finicky in operation. For example, the radio will stay on if I had my foot on the brake pedal when I stopped the engine. Another example is with the folding mirrors. Regardless of whether I am using the fob or CA, the mirrors will not fold if the front passenger door is open. The rear doors can be open while you lock the car and the mirrors will fold. Not so with the front doors. Car will lock, but mirrors won't fold until you lock again after door was closed. Just nuances...

Maxipes · 03-09-2016, 02:41 PM

Quote:

Originally Posted by Doanster

You said you coded other things successfully, but yet don't see an "aktiv" option for the auto-unlock? What options does it show? Only "nicht_aktiv"? Very strange if so.

Regarding your other question about the radio turning off after engine stop, I coded "TCM_LOGIC_R_OFF_DOOR" under section 3020 vs the one you tried.

Overall, some of these items are finicky in operation. For example, the radio will stay on if I had my foot on the brake pedal when I stopped the engine. Another example is with the folding mirrors. Regardless of whether I am using the fob or CA, the mirrors will not fold if the front passenger door is open. The rear doors can be open while you lock the car and the mirrors will fold. Not so with the front doors. Car will lock, but mirrors won't fold until you lock again after door was closed. Just nuances...

Yes, it has only "nicht_aktiv", it happened after last software update at BMW service.
I'll differently try "TCM_LOGIC_R_OFF_DOOR" in 3020
Thanks!

Maxipes · 03-09-2016, 02:43 PM

Quote:

Originally Posted by ttalone

I have coded several of the standard 'options' successfully, NP. The one I cannot get to 'code' is "Unlock when Engine Stop". I follow the steps, but when I get to edit step, changing nicht_aktiv to aktiv for vam_unlock_kl15off_after_pia_auto_lock in BDC_BODY, the aktiv option / value is not not showing up. I only get nicht_aktiv in the drop-down list. Any thoughts or ideas for how to fix / get around? Or have you seen this before, anyone? TY!

Same problem...

dmnc02 · 03-09-2016, 04:41 PM

Quote:

Originally Posted by Maxipes

Hi guys!
What happened to
"Unlock when STOP Engine" in BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK
Such a convenient option but doesn't have "aktiv" option on 'EDIT'
Does anybody figure yet?
I tried CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041.
It is not working...

See the following thread and check the fix mentioned in post #34. It should work for the X5 too, since this is the way EU cars are coded.

Coding error for all door unlock? Bad ECU code?

pragueX5 · 03-10-2016, 04:39 PM

anyone can recommend good coder in Europe?
want stuff like dvd play in motion and rear DRL on etc....

googoogaga · 03-11-2016, 01:53 PM

hi shawn, could you please send me the latest e-sys and psdzdata for F15 please thank you!

shawnsheridan · 03-12-2016, 04:12 PM

Quote:

Originally Posted by googoogaga

hi shawn, could you please send me the latest e-sys and psdzdata for F15 please thank you!

PM sent.

Hideada · 03-12-2016, 10:20 PM

Hi
Hello
I am interested in the traffic jam assistant.
I was fitted with a parts　and　add code 5AR to VO Code and VO code the following ECUs: BDC_BODY, KAFAS, ICM and KOMBI.

Touch sensor module
Steering wheel wiring harness for Touch sensor module
M Sport touch-enabled steering wheel

When I start to when the vehicle is stopped it becomes as standby photo.

But　car will start running when the error.
”Traffic　jam assist Abnormality"

What are the things that do not have enough to me?
・calibration of module does not conduct.(Need Reingold?)
・My car doesn't have parking assist option
Need it?(Auto handle control？）

thanks

Manatee · 03-13-2016, 08:23 AM

Hey Shaun,

Car just returned from service and I'm getting a can't find CADF error when trying to code BDC_BODY. I'm on PSD v57.3 and Esys 3.27.1 - Assume I need an update. Could you PM latest links pls. Thanks

shawnsheridan · 03-13-2016, 01:00 PM

Quote:

Originally Posted by Manatee

Hey Shaun,

Car just returned from service and I'm getting a can't find CADF error when trying to code BDC_BODY. I'm on PSD v57.3 and Esys 3.27.1 - Assume I need an update. Could you PM latest links pls. Thanks

PM sent.

03-07-2016, 03:44 PM	#2161
Maxipes Private 23 Rep 75 Posts Drives: 2017 X5 e40 Join Date: Oct 2014 Location: Northern New Jersey iTrader: (0)	Hi Shawn! After recent software update at BMW service I started coding from scratch. Everything was well, but after I changed the values and get back to CAFD folder to Code FDL it gave a window with message: ABORT! ASYNCHRONE PROGRAMMING FAILED! [C049] TASK EXTENSION CONFIGURATION MISSING IN CONTAINER - MAYBE THE TEMPLATE IS TOO OLD [1906] and then click CLOSE and another message with PSdZ Error saying the same: ABORT! ASYNCHRONE PROGRAMMING FAILED! [C049] TASK EXTENSION CONFIGURATION MISSING IN CONTAINER - MAYBE THE TEMPLATE IS TOO OLD [1906] Any thoughts? What should I do? Thanks,
	Appreciate 0 Quote

03-07-2016, 06:33 PM	#2163
Maxipes Private 23 Rep 75 Posts Drives: 2017 X5 e40 Join Date: Oct 2014 Location: Northern New Jersey iTrader: (0)	Yes, Shawn. v.58.0_PSdZData_Lite
	Appreciate 0 Quote

03-07-2016, 06:36 PM	#2164
Maxipes Private 23 Rep 75 Posts Drives: 2017 X5 e40 Join Date: Oct 2014 Location: Northern New Jersey iTrader: (0)	And E-Sys 3.26
	Appreciate 0 Quote

03-08-2016, 07:22 PM	#2166
Maxipes Private 23 Rep 75 Posts Drives: 2017 X5 e40 Join Date: Oct 2014 Location: Northern New Jersey iTrader: (0)	Hey Shawn! As always you're the best! After I downloaded v.58.0_PSdZData_Lite from your direction of link and updated E-sys to 3.27 everything went nice and smooth! I coded my "baby" successfully! Thanks a lot! I tried your version to change setting "Ignition and radio OFF after driver door open" but it doesn't work. I changed value to "aktiv" in CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041 Any advise?
	Appreciate 0 Quote

03-09-2016, 12:33 PM	#2168
Maxipes Private 23 Rep 75 Posts Drives: 2017 X5 e40 Join Date: Oct 2014 Location: Northern New Jersey iTrader: (0)	Hi guys! What happened to "Unlock when STOP Engine" in BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK Such a convenient option but doesn't have "aktiv" option on 'EDIT' Does anybody figure yet? I tried CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING" in BDC_BODY 3041. It is not working...
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

03-10-2016, 04:39 PM	#2173
pragueX5 Second Lieutenant 156 Rep 289 Posts Drives: 2021 X5 M 40d mildhybrid Join Date: Feb 2016 Location: PRAGUE, Czech Rep. iTrader: (0)	europe anyone can recommend good coder in Europe? want stuff like dvd play in motion and rear DRL on etc.... Last edited by pragueX5; 03-12-2016 at 03:27 PM..
	Appreciate 0 Quote

03-11-2016, 01:53 PM	#2174
googoogaga Registered 0 Rep 4 Posts Drives: BMW F15 Join Date: Mar 2016 Location: Sydney Australia iTrader: (0)	hi shawn, could you please send me the latest e-sys and psdzdata for F15 please thank you!
	Appreciate 0 Quote

03-12-2016, 10:20 PM	#2176
Hideada Enlisted Member 23 Rep 48 Posts Drives: BMW X5（G05） 2019 Join Date: Oct 2015 Location: Japan iTrader: (0) Garage List 2019 BMW X5 [0.00]	I've Question Traffic JAM Assist. Hi Hello I am interested in the traffic jam assistant. I was fitted with a parts　and　add code 5AR to VO Code and VO code the following ECUs: BDC_BODY, KAFAS, ICM and KOMBI. Touch sensor module Steering wheel wiring harness for Touch sensor module M Sport touch-enabled steering wheel When I start to when the vehicle is stopped it becomes as standby photo. But　car will start running when the error. ”Traffic　jam assist Abnormality" What are the things that do not have enough to me? ・calibration of module does not conduct.(Need Reingold?) ・My car doesn't have parking assist option Need it?(Auto handle control？） thanks Last edited by Hideada; 03-13-2016 at 07:42 AM..
	Appreciate 0 Quote

03-13-2016, 08:23 AM	#2177
Manatee Enlisted Member 5 Rep 48 Posts Drives: X5 30d MSport (F15) Join Date: Jan 2014 Location: UK iTrader: (0)	Hey Shaun, Car just returned from service and I'm getting a can't find CADF error when trying to code BDC_BODY. I'm on PSD v57.3 and Esys 3.27.1 - Assume I need an update. Could you PM latest links pls. Thanks
	Appreciate 0 Quote