BMW Coding Thread

[shawnsheridan]

Originally Posted by OuKEnFoLdMX

...but i still backup all the other files except this 3 error ones...

You need new PSdZData.

PM sent.

[OuKEnFoLdMX]

thanks everyone i have just start downloading the 54.0 PSdZData Lite Version i current have the 53.0 thats why.

[opasha]

Originally Posted by OuKEnFoLdMX

thanks everyone i have just start downloading the 54.0 PSdZData Lite Version i current have the 53.0 thats why.

Hm...53.0 is still recent unless they did some dealer update that is interfering with your ACSM. When you finish downloading - place it in the correct place - make sure you completely delete all the remnants of 53.0 before dragging and dropping the new files of 54.0 into the same location or else they can get mixed up and become corrupt. PM me so I can help you over Team Viewer when it is done.

[possib1edoc]

Originally Posted by shawnsheridan

Just 609 Nav Pro, and then you can code it.

So that's what the car comes standard with right? Thanks for your help

[opasha]

Originally Posted by possib1edoc

So that's what the car comes standard with right? Thanks for your help

Yep, in America and most Euro countries, the Nav is standard. Some smaller countries they might take it out for who knows what reason, but you should be good. Every code you need is in r33's cheat sheet regarding the video in motion. PM me know if you run into difficulties.

[Hang0ver]

Originally Posted by skalberti

Yep, I thought I was paying $500 for an additional mic and the cradle. Neither was I worried about having. However, when I got my car I noticed it had the 2nd mic like my 535 that has the factory 6NS. Then after I coded it I went through NBT and the 2nd mic was aktiv and the code that states whether you have one or two mics said two. So I'm glad I kept the $500 in my pocket.

I'm feeling that I should get some discussion going on this one. are you sure we get 2 mics? I don't think so. we have a provision which is closed if you don't get it. doesn't make sense for BMW to manufacture 2 roof designs just for mic. so they might have closed with a dummy

you get those enabled when you code because, that's what needs to be done for 6NS and its doing. of course it doesn't work because there is no second mic

thoughts?

[hyde]

Originally Posted by shawnsheridan

You need new PSdZData.

In my case,
PSdZDATA v.53.5_PSdZData_Lite, is this one still up to date?

Assuming his PSdZdata is outdated.. Let's see him come back after trying the new ones.

[OuKEnFoLdMX]

Originally Posted by opasha

Hm...53.0 is still recent unless they did some dealer update that is interfering with your ACSM. When you finish downloading - place it in the correct place - make sure you completely delete all the remnants of 53.0 before dragging and dropping the new files of 54.0 into the same location or else they can get mixed up and become corrupt. PM me so I can help you over Team Viewer when it is done.

ok all good now, without errors after using the 54.0, @opasha i just waiting to tokenmaster for my pin, when i get it i contact you thanks men i allready backup cafs.

[opasha]

Originally Posted by OuKEnFoLdMX

ok all good now, without errors after using the 54.0, @opasha i just waiting to tokenmaster for my pin, when i get it i contact you thanks men i allready backup cafs.

Good deal .

[r33_RGSport]

Originally Posted by hyde

In my case,
PSdZDATA v.53.5_PSdZData_Lite, is this one still up to date?

Assuming his PSdZdata is outdated.. Let's see him come back after trying the new ones.

As long your car database is not the most recent one, then you are good with what you are having.

[OuKEnFoLdMX]

hello guys just to make things right, i wanna code 6NS , just i have to put it into the fa and code the car and thats all? or i have to fdl code something else?
thanks

[opasha]

Originally Posted by OuKEnFoLdMX

hello guys just to make things right, i wanna code 6NS , just i have to put it into the fa and code the car and thats all? or i have to fdl code something else?
thanks

1) Add 6NS to FA following the video or pdf listed in the OP regarding adding FA and VO Coding - some say replace 6NH with 6NS - try just adding first as @skalberti mentioned
2) VO Code HU_NBT
3) That's it - then just unpair your bluetooth etc as @skalberti and a few other have mentioned - just follow their tips on getting your phones to sync correctly.

[OuKEnFoLdMX]

Originally Posted by opasha

1) Add 6NS to FA following the video or pdf listed in the OP regarding adding FA and VO Coding - some say replace 6NH with 6NS - try just adding first as @skalberti mentioned
2) VO Code HU_NBT
3) That's it - then just unpair your bluetooth etc as @skalberti and a few other have mentioned - just follow their tips on getting your phones to sync correctly.

ok i just do not understand 2) VO code hu_nbt, what you mean?

can i code everything with engine running?

[skalberti]

Originally Posted by Hang0ver

I'm feeling that I should get some discussion going on this one. are you sure we get 2 mics? I don't think so. we have a provision which is closed if you don't get it. doesn't make sense for BMW to manufacture 2 roof designs just for mic. so they might have closed with a dummy

you get those enabled when you code because, that's what needs to be done for 6NS and its doing. of course it doesn't work because there is no second mic

thoughts?

Ok I tested this put on my 535 with the factory 6NS and my X5 with the coded 6NS. It appears BMW is a real tight wad and used a dummy mic on the passenger side. I'm not sure how much of a difference it makes since me and my wife often talk to friends while we're in the car and they can hear us both fine. One thing BMW did do was pre wire for the second mic. So all you have to do is purchase this and pop it in:

http://parts.bmwofbridgewater.com/p/...109263744.html

http://parts.bmwofbridgewater.com/sh...sembly=6214782

[opasha]

Originally Posted by OuKEnFoLdMX

ok i just do not understand 2) VO code hu_nbt, what you mean?

can i code everything with engine running?

Watch the FA and VO Coding video and you will understand. It is 6 minutes of benefit to your life, lol.

Yes, you can code with engine running. I prefer this for longer coding sessions anyway.

Originally Posted by skalberti

Ok I tested this put on my 535 with the factory 6NS and my X5 with the coded 6NS. It appears BMW is a real tight wad and used a dummy mic on the passenger side. I'm not sure how much of a difference it makes since me and my wife often talk to friends while we're in the car and they can hear us both fine. One thing BMW did do was pre wire for the second mic. So all you have to do is purchase this and pop it in:

http://parts.bmwofbridgewater.com/p/...109263744.html

http://parts.bmwofbridgewater.com/sh...sembly=6214782

Thanks for the clarification and update from both of you.

[OuKEnFoLdMX]

well thanks @opasha for remote conding 6NS works excelent, office, 2 phones etc etc, all good to go.

i make fld coding and all works great except, Tire Pressure and Temperature on Vehicle Status i can not see the numbers.

can someone tell me process to see a video from usb, i just plug it in usb port and how do i load the video in idrive?

what is FLA Active When Headlights Manually On? and TLC Coding for Road Edge Detection?

thanks

[Hang0ver]

Originally Posted by OuKEnFoLdMX

well thanks @opasha for remote conding 6NS works excelent, office, 2 phones etc etc, all good to go.

i make fld coding and all works great except, Tire Pressure and Temperature on Vehicle Status i can not see the numbers.

can someone tell me process to see a video from usb, i just plug it in usb port and how do i load the video in idrive?

what is FLA Active When Headlights Manually On? and TLC Coding for Road Edge Detection?

thanks

try reset tire pressure and drive for sometime. it should pop in values.

load videos into USB and connect it. go to media and in left side list of options, you will have option for videos. select that and all videos will be displayed. then you can play from there.

I think in one of the posts in this thread fla is discussed. try to search as I am replying from mobile

road edge makes the kafas camera to recognize road edge and grass also as lane ends and warns if you go towards it like lane departure.

[OuKEnFoLdMX]

all clear now thanks @Hang0ver

[opasha]

Originally Posted by OuKEnFoLdMX

all clear now thanks @Hang0ver

Sorry, I was busy helping @cy07 code his 6WB . What @Hang0ver said is correct. If you have any other questions, just ask. Many knowledgeable coders here now!

[Hang0ver]

Originally Posted by OuKEnFoLdMX

all clear now thanks @Hang0ver

you are welcome and happy coding

[hyde]

Paging @opasha. @shawnsheridan, @r33 http://www.bimmerfest.com/forums/sho...46#post8719146

[opasha]

Originally Posted by hyde

Paging @opasha. @shawnsheridan, @r33 http://www.bimmerfest.com/forums/sho...46#post8719146

I'm sure there is something, but I'm not sure 100% though where it could be.