Lane departure coding

[heifetz17]

Hey guys, I finished coding everything I think I want into my X5 but I can’t seem to find where to adjust the activation speed for the lane departure. Right now it activates at 40 and deactivates at 37. I’d like to lower both to 25 or so. I already found the blind spot, but can’t find lane departure. Anyone know?

[heifetz17]

Anyone?

My research led me to a post on bimmerfest that says:

ICM>Hc2_i_CPar_Aktiv_v_high
ICM>Hc2_i_CPar_Aktiv_v_low

to adjust the speed values, but those parameters don't exist in my ICM. Where else can I look to adjust the LDW activation speed?

[Qsilver7]

What software or app are you using to code? That would be helpful in helping us to help you better. If it is doable…if we don’t have the same software/app…it might be a waste of time researching…then finding out you have something different.

If you are using Bimmercode…they list all of the coding parameters if you look under SUPPORTED CODING on their website and select your vehicle.
They give an alphabetical list of topics which also shows which module the coding parameters are found: https://www.bimmercode.app/cars/

If it is not listed for your BMW…try looking at another model that may have this coding feature and see what module it is in…then check if you have that same module. If you do, you may have to go to the EXPERT side to see if you have the coding parameters for your model/model year.

Good luck.

[heifetz17]

I have both BimmerCode as well as e-sys, and I’m currently trying to complete this using BimmerCode.

I have already read through BimmerCode’s supported coding for my vehicle but it doesn’t appear to be a comprehensive list specifically of the available coding options in expert mode.