Trailer electrics overload

[Deezulbeem]

Got this weird error after installing my stealth hitch with the active harness. I triple checked my wiring, and tested it on two trailers. The first trailer was older, so I blamed it on the trailer. The second trailer is my brand new boat trailer, and got this weird error. Turn signals do not work, but the trailer running lights and reverse lights work just fine?

[happydude]

Try checking your fuse box and make sure all the fuses are connected. I had that same error and it turned out one of the fuses wasn’t fully connected.

[Deezulbeem]

Originally Posted by happydude

Try checking your fuse box and make sure all the fuses are connected. I had that same error and it turned out one of the fuses wasn’t fully connected.

Gonna pull them out and make sure the circuits added didn’t pop the fuse. I preliminarily pushed them in, but need to double check.

[Deezulbeem]

Checked all the fuses today. Guess I’ll check if I installed the wiring in the 7 pin correctly.

[Deezulbeem]

Did not wire 7 pin correctly. Lol.

[Chicane_S54]

Originally Posted by Deezulbeem

Did not wire 7 pin correctly. Lol.

Given how you post photos, not really shock.

[turboawd]

Originally Posted by Chicane_S54

Given how you post photos, not really shock.

You're really something