AutoTalent | Dinan intake+exhaust+suspension+tuner+ride kit for Bmw X5M/X6M 2015-2018

AutoTalent · 09-23-2019, 04:11 PM

Carbon Fiber Cold Air Intake

To order please visit our website by clicking HERE

The under hood appearance is completely changed and set off by intricate carbon detailing that make the engine compartment as flattering as the sleek exterior lines of the car. The aesthetics are the most recognizable change to the system, and furthermore the impressive functionality that lies beneath the carbon fiber lid. Striking' is the first word that comes to mind when you pop the hood of a F8x X5M/X6M with a Dinan carbon fiber cold air intake system. The increased volume of the air box allows the larger filters to ingest more air at any given moment and elicit a slightly more audible and sporty tone over its stock counterpart. This optimized design yields increased HP/TRQ throughout the power band and shows consistent gains over stage 1 when combined with the stage 2 DINANTRONICS Performance Tuner.

Features

More Power: Max gains of 23 HP @ 5500 RPM and 25 lb-ft of torque @ 4000 RPM when combined with the Stage 2 DINANTRONICS Performance Tuner and exhaust over stage 1 tuning.
Sportier Sound
Improved throttle response
~15% Larger volume air box via a Carbon Fiber lid that allows for the spacing needed for the larger filters.
228% increase in filter area (stock: 44.5in² each, Dinan: 146.2in² each)
Dinan filters draw air in from all around versus the stock filters which only draw from the front and back of the filter.
Bolt-on installation

-------------------------------------------------------

Dinan Free Flow Exhaust

To order Black Tips please visit our website by clicking HERE

To order Polished Tips please visit our website by clicking HERE

Dinan's Free Flow Exhaust with Black Tips for the F85 X5M and F86 X6M yields increased power gains in the higher RPM range by reducing back pressure and elicits a deep exhaust note with no drone. The F85 X5M and F86 X6M are the quintessential SUV in terms of power and performance with accolades in numerous periodicals crowning them the pinnacle of their class. With the possibility of putting down over 700 HP with a base tune these vehicles are no slouch. Dinan engineers wanted to match this impressive feat with an equally impressive exhaust tone that let those around these SUV's hear the power that lies beneath the hood as well as be able to show it.

Features

+ 8 HP @ 6000 RPM, 7 FT-LB @ 6000 RPM
+ Quad 89mm (3.5") laser engraved black ceramic exhaust tips
+ Enjoyably louder, sportier sound with a deep growl
+ Helmholtz chamber to reduce drone
+ Computer controlled valve limits noise during low speed driving; valve opens fully during high-load conditions to allow free flow
+ 100% 304 stainless steel construction
+ Bolt-on Installation

-------------------------------------------------------

Dinan Supplemental Ride Quality & Handling Kit

To order please visit our website by clicking HERE

Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets. Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits.

-------------------------------------------------------

Dinan Performance Spring Set

To order please visit our website by clicking HERE

The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input. Dinan's Performance Spring set for the F85 X5M and F86 X6M provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by a 5/8" in front and 3/4" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 10% increase in stiffness to the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel.

Features

+ Decreased body roll from higher spring rates (10% increase in front)
+ Lowers the vehicle 5/8" in front and 3/4" in the rear
+ Shot-peened for stress relief
+ Preset to prevent spring sag
+ Compatible with factory electronic shocks and load-leveling systems

-------------------------------------------------------

Dinantronics Performance Tuner

To order please visit our website by clicking HERE

DINANTRONICS™ Performance Tuner is a highly engineered and sophisticated piece of computer hardware and software that enhances engine performance, without ineffectively or invalidate your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device emissions legal in all 50 states. The objective of developing this piece of technology was to provide the ability to control every signal entering and exiting the BMW factory Engine Control Unit. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package.

How to Place Your Order:

Phone Domestic: (310) 231-0292

Phone International: (310) 231-0292

E-mail: online@autotalent.com

Website: www.AutoTalent.com

Payment:

Installations:

Feel free to visit us at our facility in Los Angeles, CA.
We install everything we sell.

19143 S. Hamilton Ave
Gardena, CA 90248

Shipping:

All orders are shipped via FedEx, UPS, USPS and Pilot.

International, Hawaii and Alaska customers: Please contact us for the best quote possible.

Hours of Operation:

Monday through Friday: 10AM-7PM Pacific Time

Saturday: By appointment only

AutoTalent · 11-09-2020, 04:24 PM