01-15-2020, 10:21 AM | #1 |
Lieutenant
314
Rep 449
Posts |
Ceramic knobs retrofit
So I finally was able to find some used AC unit with ceramic buttons on eBay.
Still it's an expensive upgrade. Bought a used unit for $80 to just use 3 small buttons but now my car ceramic package is done Had to remove and open the AC/radio unit but it wasn't too hard and definitely can be done. |
01-15-2020, 01:10 PM | #4 | |
Brigadier General
2141
Rep 3,647
Posts |
I figured the X5M would have come with ceramic controls, but just checked some pics online and doesn't look like they did?
Quote:
https://f15.bimmerpost.com/forums/sh...ostcount=10064 |
|
Appreciate
0
|
01-15-2020, 01:13 PM | #5 |
Living the dream
4588
Rep 2,194
Posts
Drives: X5 w/MPPK, MPE & RC GTS Black
Join Date: Dec 2014
Location: The Lone Star State
|
Launch Control Max
__________________
|
Appreciate
0
|
01-15-2020, 05:19 PM | #7 |
IG: @88jae88
1621
Rep 1,734
Posts |
I wanted to do this to ever piece of silver trim throughout the vehicle.. I know the traditional thing would be to replace with carbon bits but I rather be different.
Great job PhillyX5M 💪🏽
__________________
IM POOR..
|
Appreciate
0
|
01-15-2020, 05:23 PM | #8 |
IG: @88jae88
1621
Rep 1,734
Posts |
Oh shit 😩
__________________
IM POOR..
|
Appreciate
0
|
01-15-2020, 09:49 PM | #11 |
Lieutenant
314
Rep 449
Posts |
Yep and I replaced it too
|
01-15-2020, 10:11 PM | #12 |
Lieutenant
79
Rep 586
Posts |
Where did you pick up the idrive ceramic knob?
Mine is pretty cheap plastic and has a sharp nic in it that sticks out and bites your finger if you grab it in the wrong spot. For the idrive replacement, do you just pull the other one off and snap on the new one? Or is it more involved?
__________________
2021 Mercedes G550
2015 X5M 2020 Supra-JB4, DP 2008 M5 with muffler delete-sold 2007 650i-sold 2008 335i-JB4, DP, Meth-sold |
Appreciate
0
|
01-16-2020, 06:31 AM | #13 |
Lieutenant
314
Rep 449
Posts |
[QUOTE=335i101;25689077]Where dod you pick up the idrive ceramic knob?
Mine is pretty cheap plastic and has a sharp nic in it that sticks out and bites your finger if you grab it in the wrong spot. For the idrive replacement, do you just pull the other one off and snap on the new one? Or is it more? You can find used AC units with ceramic knobs on eBay but they r usually expensive $200,300... Took me some time to find a cheaper one. Doesn't matter what model as you will be cannibalizing it anyway as you just need the knobs. For replacement you will need to open the unit and push out the knobs from behind. Radio knob can be pulled off but you need to make sure that the metal thing inside the radio knob is the same length as the one in ceramic. Chances are it's not so you will just need to use the one from ceramic but it will fit without issues as it's only length is slightly different. The idrive controller is eBay too. I was lucky to find one for F15 from Europe. You will need to remove the whole panel and there will be only 3 screws and one wire connector underneath holding the idrive controller. Last edited by PhillyX5M; 01-16-2020 at 06:43 AM.. |
Appreciate
0
|
01-16-2020, 06:49 AM | #14 |
Living the dream
4588
Rep 2,194
Posts
Drives: X5 w/MPPK, MPE & RC GTS Black
Join Date: Dec 2014
Location: The Lone Star State
|
Did you do the rear AC controls as well?
It blends perfect with the CF bits, looks awesome!
__________________
|
Appreciate
0
|
01-16-2020, 12:32 PM | #15 | |
Lieutenant
314
Rep 449
Posts |
Quote:
Will probably do them too but need to find another not overpriced set of ceramics. Kid drives in the back and she is fine with plastic for now |
|
Appreciate
1
Violator4587.50 |
01-16-2020, 12:54 PM | #16 | |
Living the dream
4588
Rep 2,194
Posts
Drives: X5 w/MPPK, MPE & RC GTS Black
Join Date: Dec 2014
Location: The Lone Star State
|
Quote:
So to be clear, you didn't replace the entire panel, you replaced the knob pieces? I had the ceramic controls on my F16 and loved them, and have been considering doing this as one of my final interior mods. You and classic_erik have made me really consider doing it now. The iDrive controller is so smooth compared to the standard version. Post an update when you complete the rear, it'll be nice to see the completed package. Cheers!
__________________
|
|
Appreciate
0
|
01-16-2020, 01:17 PM | #17 |
Lieutenant
314
Rep 449
Posts |
Yep, I only used the ceramic knobs the rest is my original equipment.
One important detail is that the radio small ceramic knob metal insert is slightly longer compared to the insert in the plastic knob so you will need to replace with the one from ceramic. It's easy as it will just slide out. If you guys will be doing it just PM me. I can always help. |
Appreciate
0
|
01-16-2020, 02:33 PM | #18 |
Living the dream
4588
Rep 2,194
Posts
Drives: X5 w/MPPK, MPE & RC GTS Black
Join Date: Dec 2014
Location: The Lone Star State
|
Sounds good thanks for the info, sounds like it would be a popular DIY thread!
__________________
|
Appreciate
0
|
01-16-2020, 10:17 PM | #21 |
Brigadier General
2141
Rep 3,647
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|