RG Sport - Spacers on F15/F16 X5/X6 F85/F86 X5M/X6M

[daytonaviolet]

Originally Posted by iconoclast

Photos? I am torn on which way to go on my X5M w/ 612M wheels.
Dinan Suspension which is quite conservative so I do not want any poke but would like to get as close to flush as possible.

There's a few pics of my 15mm/20mm setup a few posts up. Here's more 😜

[Lego864]

Originally Posted by daytonaviolet

There's a few pics of my 15mm/20mm setup a few posts up. Here's more 😜

What's your suspension setup?

[daytonaviolet]

Originally Posted by lego864

what's your suspension setup?

h&r vtf 🥴

[1norseman]

I ended up getting another set of spacers from Ben.
The new wheels despite their more aggressive ET, still needed a bit more.. (I would probably not need spacers if I rode on stock springs though)

15mm for the rear 20x11 ET22 wheels and 5mm up front on the 20x10 ET30 wheels.
I could almost run a 15mm spacer up front also, but it makes the front lip look way to narrow.

[The Island]

Hi Ben,

Can you message me a price for a 15/15 and 15/20 setup?

I have a 2015 X6 35i on 21inch 612m wheels with OEM tire sizes.

[r33_RGSport]

Originally Posted by The Island

Hi Ben,

Can you message me a price for a 15/15 and 15/20 setup?

I have a 2015 X6 35i on 21inch 612m wheels with OEM tire sizes.

PM'ed.

[iconoclast]

F85 spacers with 612M wheels and bolts available? I only see spacers listed and whichever wheel bolts I find they are all for aftermarket wheels.

[r33_RGSport]

Originally Posted by iconoclast

F85 spacers with 612M wheels and bolts available? I only see spacers listed and whichever wheel bolts I find they are all for aftermarket wheels.

Yes, they are available.
The lug bolts listed on my website are for when you use wheel spacer.
H&R sells the lug bolts separately, that's why I have it as an option on my website.
I got a few cases where the customer thinks that my price is high where others quoted them without the lug bolts.

For F85 with 612M, I recommend 5/12 for conservative setup and 15/15 for flush setup.

[iconoclast]

I would like to do 15/15 and bolts. Care to send over a quote?

[r33_RGSport]

Originally Posted by iconoclast

I would like to do 15/15 and bolts. Care to send over a quote?

PM'ed

[iconoclast]

Dinan Spring & Handling Kit with 15mm spacers for the front and rear. Purchased through Ben at RGsport.

[daytonaviolet]

Originally Posted by iconoclast

Dinan Spring & Handling Kit with 15mm spacers for the front and rear. Purchased through Ben at RGsport.

Ben is the man 😜. Got my spacers and suspension from him.

[r33_RGSport]

Originally Posted by iconoclast

Dinan Spring & Handling Kit with 15mm spacers for the front and rear. Purchased through Ben at RGsport.

[img]https://i.ibb.co/3s1pnhD/IMG-20190814-213351-03555.jpg[/img]

Looking good.

Originally Posted by daytonaviolet

Ben is the man 😜. Got my spacers and suspension from him.

Thank you for the kind words.

[histandards]

Originally Posted by iconoclast

Dinan Spring & Handling Kit with 15mm spacers for the front and rear. Purchased through Ben at RGsport.

Are those oem 612ms? Nice stance with those dinan springs. Except a side profile shot doesn’t show anything in relation to using spacers. 😏🤷🏽*♂️

I have 22” 612m reps in the mail along with some 20mm rear spacers from Ben. Can’t wait.

[iconoclast]

Yes, they are the OEM 612M. The spacers show on profile shot and where I notice it the most if you compare it to the same spot, same car, with/without.

[parkstr8]

I think what he is saying is from the side you can't tell if you have them or not. The spacers can only really be seen from the rear or some 3/4 shots. You can't tell the depth from a side shot.

Originally Posted by iconoclast

Yes, they are the OEM 612M. The spacers show on profile shot and where I notice it the most if you compare it to the same spot, same car, with/without.

[iconoclast]

15mm Spacers All Around:

[daytonaviolet]

looks great since your not lowered much, you have little or no rear camber. the camber really pushes the tire in so it reduces the sticking out effect of the spacer. i'm lowered with kw and i'm running 20mm rears

Originally Posted by iconoclast

15mm Spacers All Around:

[iconoclast]

you're absolutely right. i think the pairing goes well. if i were to lower i would do 20mm front and 25mm rear to get the flush effect but for this application it lands perfectly for my objective. i am pleased with the results and ben was great as usual. professional and prompt. could not ask for more.

[Jason73]

I have a 2014 without the extended fender flares. Most photos seem to show pictures with the extended fender flares. So, my question is would the 5/15mm setup with 19inch wheels stick out too much, or would it be about right. Planning on doing this when lowering with Eibachs.

[r33_RGSport]

Originally Posted by Jason73

I have a 2014 without the extended fender flares. Most photos seem to show pictures with the extended fender flares. So, my question is would the 5/15mm setup with 19inch wheels stick out too much, or would it be about right. Planning on doing this when lowering with Eibachs.

BMW have a few different 19" setup.
And there are square 19" and staggered 19".
I will need more information to give you a suggestion on which spacer to run.

[Jason73]

Same size tires all the way around. 255s. If that’s what you mean?