BMW Coding Thread

[albec]

Originally Posted by InsipidMonkey

Did you try flashing with the ignition on?

Yes did the flashing process with the ignition on and the emergency light on light.

[albec]

I tried one last time and keep getting the same fault.

Im using E-SYS 33.3.4 with Launcher PRO V3.4.0 with psdzdata from Extracted from ISTA version 4.17.13

Any help would be great!!

[HU_NBT - 63] finalizeECUFlash started [PROGRESS]
[HU_NBT - 63] finalizeECUFlash finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT - 63] job failed with negative response error:
code: Problem during HTTP softwareupdate occurred! Update failed
description: Errorstatus: UPDATE_ERROR; Errorcode HTTP-Server: 0; LinkName: HU_NBT_63_ETHERNET_63
severity: ERROR

[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "5min 6s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[Almaretto]

Originally Posted by albec

I tried one last time and keep getting the same fault.

Im using E-SYS 33.3.4 with Launcher PRO V3.4.0 with psdzdata from Extracted from ISTA version 4.17.13

Any help would be great!!

Launcher is not required for flashing. Try without.

Is this with unmodified FA?

[albec]

Originally Posted by Almaretto

Launcher is not required for flashing. Try without.

Is this with unmodified FA?

I previously added 3AG to the FA with an older version of E-SYS.

Will try to run without launcher 🤞

[Almaretto]

Originally Posted by albec

I previously added 3AG to the FA with an older version of E-SYS.

Will try to run without launcher 🤞

You can run into issues if option was not valid for given vehicle specs.

Any luck without launcher?

[skoold2003]

Originally Posted by albec

I tried one last time and keep getting the same fault.

Im using E-SYS 33.3.4 with Launcher PRO V3.4.0 with psdzdata from Extracted from ISTA version 4.17.13

Any help would be great!!

[HU_NBT - 63] finalizeECUFlash started [PROGRESS]
[HU_NBT - 63] finalizeECUFlash finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT - 63] job failed with negative response error:
code: Problem during HTTP softwareupdate occurred! Update failed
description: Errorstatus: UPDATE_ERROR; Errorcode HTTP-Server: 0; LinkName: HU_NBT_63_ETHERNET_63
severity: ERROR

[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "5min 6s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

I've run into errors similar to this before. I'm not sure if it was the exact same or not. I believe that in my case my ethernet connection stopped working. I was running on a VM. After a reboot I was able to code the parameter that failed before.

[eggyacid]

Originally Posted by HZX540e

I have mn-003.009.004 and tn-003-009-004

This is the same one I have now… just picked up my car from dealership and they updated to MN-003.009.004 and TN-003.009.004
not sure why they didn't update to the latest? Is there a way to update to the latest on my own?

[bms5]

Connected with my old laptop with 3.27.1 and 4.18.22 (can’t load Esys on my new laptop because of the date and Token conflict).
Read ECU with no problem but when clicking Read Coding Data I get an error message on BDC Module. No problem with HKM data read.
See attached screen shot. Any help greatly appreciated!

[shawnsheridan]

Originally Posted by bms5

Connected with my old laptop with 3.27.1 and 4.18.22 (can’t load Esys on my new laptop because of the date and Token conflict).
Read ECU with no problem but when clicking Read Coding Data I get an error message on BDC Module. No problem with HKM data read.
See attached screen shot. Any help greatly appreciated!

"Doesn't map to an item" means you choose wrong E-Sys Connection Target or choose wrong E-Sys Launcher Car Series.

[bms5]

Originally Posted by shawnsheridan

"Doesn't map to an item" means you choose wrong E-Sys Connection Target or choose wrong E-Sys Launcher Car Series.

Thanks, Shawn. I’ll recheck my choices and report back.

[Grizzles]

I figured out how to extend my time for XM radio timeshift. When I unlock my car in the morning the radio is set to my favorite station. The factory setting gives me 6 minutes max. before going back to sleep.
I reset my coding with BimmerCode in expert mode to wert 2. Now I get more time. When I get in my car I rewind till I get to the beginning. This allows me to skip commercials.

[mrfochon]

Originally Posted by Grizzles

I figured out how to extend my time for XM radio timeshift. When I unlock my car in the morning the radio is set to my favorite station. The factory setting gives me 6 minutes max. before going back to sleep.
I reset my coding with BimmerCode in expert mode to wert 2. Now I get more time. When I get in my car I rewind till I get to the beginning. This allows me to skip commercials.

Can you explain a bit more what does that do ? XM is the radio right ?

[Biggs87]

Does anyone know if it possible to code the ambient lights to be brighter on 2017 X5 F15?

[MK2018]

Originally Posted by Biggs87

Does anyone know if it possible to code the ambient lights to be brighter on 2017 X5 F15?

No

[Grizzles]

Originally Posted by mrfochon

Can you explain a bit more what does that do ? XM is the radio right ?

When you unlock the car the XM radio timeshift begins. This lasts 6 minutes or so until the car goes into sleep mode. So you have up to six minutes recorded on your cars memory.

[richiiuk]

Hi can anyone help me out with the full psdzdata that will work with esys 3.27.1, my I step is F025-16-03-504 from a mid 2016 X5. Thanks

[bms5]

Originally Posted by bms5

Thanks, Shawn. I’ll recheck my choices and report back.

My error; I had mistakenly selected F020 instead of F025.

I was able to connect and do some FDL coding in BDC using both Cheat Codes as well as manual editing.

However, when I read coding data from HKFM2 CAFD_00005710_004_000_000 and attempt to Edit FDL, there are no descriptions showing up to know what to edit and Cheat Code section is empty. I am trying to code hatch closing with fob and inside button.

I-Step (current) is F-25-18-11-520

Any help is greatly appreciated!

[pdxKris]

shawnsheridan , can you please PM the latest ESYS and launcher + PSdZdata?

Thanks!

[shawnsheridan]

Originally Posted by pdxKris

shawnsheridan , can you please PM the latest ESYS and launcher + PSdZdata?

Thanks!

PM sent.

[MK2018]

What you guys think? Is this worth the money?


https://www.ebay.ca/itm/For-ISTA-D-4...cAAOSwV3hb6aby

[Almaretto]

Originally Posted by MK2018

What you guys think? Is this worth the money?


https://www.ebay.ca/itm/For-ISTA-D-4...cAAOSwV3hb6aby

Price is high unless that is good K+DCAN. You only need ENET for F/I/G-series.

[MK2018]

Originally Posted by Almaretto

Price is high unless that is good K+DCAN. You only need ENET for F/I/G-series.

Thanks for advice