BMW X5 and X6 Forum 2014-Current
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Post Reply
 
Thread Tools Search this Thread
      09-09-2019, 09:35 AM   #639
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

After a bit of research,

I am going to go with E70 X5M front calipers and rear panamera rear calipers. It will be 4 pot all around but will look much better!
Appreciate 0
      09-09-2019, 10:34 AM   #640
spacegray_f15
Second Lieutenant
169
Rep
231
Posts

Drives: 2014 N55 M sport
Join Date: Jan 2018
Location: Orlando Florida

iTrader: (0)

Quote:
Originally Posted by djrabbi View Post
After a bit of research,

I am going to go with E70 X5M front calipers and rear panamera rear calipers. It will be 4 pot all around but will look much better!
what size rotor for the rear and will you need a custom bracket for the Panamera rear caliper?
Appreciate 0
      09-09-2019, 09:53 PM   #641
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by spacegray_f15 View Post
what size rotor for the rear and will you need a custom bracket for the Panamera rear caliper?
After looking over the budget, I am going to get 6 calipers.

2 - X5 M E70 Front Calipers
2- Regular 50i Rear Calipers
2- Panamera Calipers.

I will do the Panamera calipers later on in the spring as I don't want my car down for too long and don't want to spend crazy amount on brakes. I will get my brakes coated all together so when I put the rears on, it will be matching color. Overall my brake budget is under $1500 with all rotors/pads.
Appreciate 0
      09-12-2019, 12:32 PM   #642
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Got my rotors in from ECS tuning. They were on sale for $225
Attached Images
 
Appreciate 0
      09-15-2019, 09:30 PM   #643
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Can anyone help?

I got the front rotors but cannot find matching rears. Are the rears 13.6"?
Appreciate 0
      09-16-2019, 12:55 AM   #644
1230vani
Colonel
1230vani's Avatar
No_Country
637
Rep
2,686
Posts

Drives: G05 40i LCI
Join Date: Feb 2009
Location: N/A

iTrader: (0)

Small m sticker for rear E70m/f15 performance brakes?

Did anyone purchase a set of rear stickers that match with the front? Thanks
Appreciate 0
      09-16-2019, 09:59 PM   #645
Maverik259
Major General
Maverik259's Avatar
United_States
4133
Rep
7,154
Posts

Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia

iTrader: (1)

Garage List
2020 BMW M5  [10.00]
2014 X5 50i  [0.00]
Quote:
Originally Posted by djrabbi View Post
Got my rotors in from ECS tuning. They were on sale for $225
Pretty sure these had figment issues if I recall but I may be wrong. I recommend going back to some of the earlier pages. Couple websites falsely advertise for the M brakes but they're really for the 50i. GL.

Also you do know the panamera need grinding down and a custom bracket. I'm sure your aware.
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold)
‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe
'14 X5 50i (wife’s now)
Appreciate 0
      09-16-2019, 10:02 PM   #646
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by Maverik259 View Post
Quote:
Originally Posted by djrabbi View Post
Got my rotors in from ECS tuning. They were on sale for $225
Pretty sure these had figment issues if I recall but I may be wrong. I recommend going back to some of the earlier pages. Couple websites falsely advertise for the M brakes but they're really for the 50i. GL.

Also you do know the panamera need grinding down and a custom bracket. I'm sure your aware.
Yes so I confirmed the front rotor is simply massive and they were mislabeled. Same goes for the rear so I had to do cross reference to find the right rotors.

Yes, I am being tronik kit, which I will have my caliper guy shave down.

Now issue is picking a color, I might go bold and do Phoenix yellow
Appreciate 1
Maverik2594133.00
      09-16-2019, 10:05 PM   #647
Maverik259
Major General
Maverik259's Avatar
United_States
4133
Rep
7,154
Posts

Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia

iTrader: (1)

Garage List
2020 BMW M5  [10.00]
2014 X5 50i  [0.00]
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Quote:
Originally Posted by djrabbi View Post
Got my rotors in from ECS tuning. They were on sale for $225
Pretty sure these had figment issues if I recall but I may be wrong. I recommend going back to some of the earlier pages. Couple websites falsely advertise for the M brakes but they're really for the 50i. GL.

Also you do know the panamera need grinding down and a custom bracket. I'm sure your aware.
Yes so I confirmed the front rotor is simply massive and they were mislabeled. Same goes for the rear so I had to do cross reference to find the right rotors.

Yes, I am being tronik kit, which I will have my caliper guy shave down.

Now issue is picking a color, I might go bold and do Phoenix yellow
Oh well if you get Tronik kit you shouldn't need to manipulate. Although that's not fitting in that budget you got lol.
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold)
‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe
'14 X5 50i (wife’s now)
Appreciate 0
      09-16-2019, 10:07 PM   #648
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

These are my color options for calipers.... lol
Attached Images
     
Appreciate 0
      09-16-2019, 10:08 PM   #649
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by Maverik259 View Post
Oh well if you get Tronik kit you shouldn't need to manipulate. Although that's not fitting in that budget you got lol.
Oh I am not getting calipers from him. It was too expensive. So far its:

X5M Calipers: $550
Porsche Rear Calipers: $150
Tronik Kit: $500
EBC Front Rotors: $273
EBC Rear Rotors: TBD
Appreciate 0
      09-18-2019, 08:04 PM   #650
Maverik259
Major General
Maverik259's Avatar
United_States
4133
Rep
7,154
Posts

Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia

iTrader: (1)

Garage List
2020 BMW M5  [10.00]
2014 X5 50i  [0.00]
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Oh well if you get Tronik kit you shouldn't need to manipulate. Although that's not fitting in that budget you got lol.
Oh I am not getting calipers from him. It was too expensive. So far its:

X5M Calipers: $550
Porsche Rear Calipers: $150
Tronik Kit: $500
EBC Front Rotors: $273
EBC Rear Rotors: TBD
Oh then what you paying $500 for? The rear adapters are $250 and their SS lines shouldn't cost more than $100. You don't need an adapter for the fronts.
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold)
‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe
'14 X5 50i (wife’s now)
Appreciate 0
      09-18-2019, 08:06 PM   #651
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by Maverik259 View Post
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Oh well if you get Tronik kit you shouldn't need to manipulate. Although that's not fitting in that budget you got lol.
Oh I am not getting calipers from him. It was too expensive. So far its:

X5M Calipers: $550
Porsche Rear Calipers: $150
Tronik Kit: $500
EBC Front Rotors: $273
EBC Rear Rotors: TBD
Oh then what you paying $500 for? The rear adapters are $250 and their SS lines shouldn't cost more than $100. You don't need an adapter for the fronts.
He's charging me $500 for rear adapters and lines...
Appreciate 0
      09-18-2019, 08:15 PM   #652
Maverik259
Major General
Maverik259's Avatar
United_States
4133
Rep
7,154
Posts

Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia

iTrader: (1)

Garage List
2020 BMW M5  [10.00]
2014 X5 50i  [0.00]
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Oh well if you get Tronik kit you shouldn't need to manipulate. Although that's not fitting in that budget you got lol.
Oh I am not getting calipers from him. It was too expensive. So far its:

X5M Calipers: $550
Porsche Rear Calipers: $150
Tronik Kit: $500
EBC Front Rotors: $273
EBC Rear Rotors: TBD
Oh then what you paying $500 for? The rear adapters are $250 and their SS lines shouldn't cost more than $100. You don't need an adapter for the fronts.
He's charging me $500 for rear adapters and lines...
Holy crap man. Do you have a machine shop? Tronik claims the calipers wont fit without milling which they do before painting. So if you have a machine shop to this part then I would just get that ship to mill adapters out of aluminum. And you can skip SS lines as they only really help in tracking when you're pushing your fluid to boiling temps. But over to you. I am curious if Tronik lied cuz these facts have held me back.

Plus curious how they sell the front adapters for $270 but the rears for much more?!
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold)
‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe
'14 X5 50i (wife’s now)
Appreciate 0
      09-18-2019, 09:40 PM   #653
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by Maverik259 View Post
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Quote:
Originally Posted by djrabbi View Post
Quote:
Originally Posted by Maverik259 View Post
Oh well if you get Tronik kit you shouldn't need to manipulate. Although that's not fitting in that budget you got lol.
Oh I am not getting calipers from him. It was too expensive. So far its:

X5M Calipers: $550
Porsche Rear Calipers: $150
Tronik Kit: $500
EBC Front Rotors: $273
EBC Rear Rotors: TBD
Oh then what you paying $500 for? The rear adapters are $250 and their SS lines shouldn't cost more than $100. You don't need an adapter for the fronts.
He's charging me $500 for rear adapters and lines...
Holy crap man. Do you have a machine shop? Tronik claims the calipers wont fit without milling which they do before painting. So if you have a machine shop to this part then I would just get that ship to mill adapters out of aluminum. And you can skip SS lines as they only really help in tracking when you're pushing your fluid to boiling temps. But over to you. I am curious if Tronik lied cuz these facts have held me back.

Plus curious how they sell the front adapters for $270 but the rears for much more?!
I'm doing the shaving also. He sent me PayPal request for $590, which includes rear adapters, shaving instructions, and lines for front and rear. It was originally $500 without front lines. Now I'm wondering if he's ripping me off 🤔🤔
Appreciate 0
      09-19-2019, 05:39 AM   #654
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

So it's $380 for rear adapters
Appreciate 0
      09-19-2019, 07:41 PM   #655
Radekxpl
The General
55
Rep
124
Posts

Drives: F15 X5 35D & E46 M3
Join Date: Jan 2018
Location: USA

iTrader: (0)

Quote:
Originally Posted by Mr.47 View Post
I had a hard time trying to figure out how the hell to code this damn brakes, however after a few hours of youtube videos and sifting thru post after post, I finally figured it out and wanted to write a comprehensive coding in ESYS 3.27.1 since there isn't any pertaining to our F15 X5 M sport brake coding.

Disclaimer: I'm not responsible for any damages, injuries or death following this steps...I'm hardly an novice and more of an imbecile when it comes to coding BMW...so if your unsure on following these steps seek an expert coder for assistance.


Pre-step, Make sure your car is hooked up to an battery charger with at least 14V to prevent vehicle from going into sleep mode. Leave keys in the vehicle, and hit start button without starting engine (no foot on brakes) and connect OBD to your computer/laptop with ESYS

1. Start connection click on the Icon that is highlighted in red




2.Select F025 and click connect this is F15 X5 F16 X6 specific, this may take a moment (WHATEVER YOU DO NOT SELECT DIRECT)



3. Click read then save



4. Save it securely, you may choose any name for our example we'll use "feb 26 fa 3"



5. After saving click EDIT and it should automatically take you to FA-Editor




6. Expand all the folders and find HO-WORT, Right Click, select NEW and click on HO-WORT



8. You'll be prompted with a small text box within the drop down folders, type in SBRE and hit enter. (SBRE is for F15 M sport brake code)



9. Right click on the FA folder, then click on calculate FP



10. It should populate the vehicle profile with no error message...now if your ESYS is working properly it should show "Aftermarket Addon", in our case its folder 8, expand folder 8 and it should be another folder with 2376, which is 18in sportbrake for F15, this confirms that file is coded and ready to be written on vehicle. Besure to click the save disk (highlighted in red) to save it.




11. Look over to the left tab and click on "Expert Mode" then click on VCM and you should see a screen like this.



12. Next look down and find for vehicle order section, select file tab and click the |...| box (highlighted in red) to load the file that we saved on the FA editor. In our case the feb 26 fa 3.xml




13 Expand the FA files and find the HO-WORT to verify the SBRE is added



14. Right click on FA and click on calculate FP this should populate the Vehicle profile section with folders



15. In the Vehicle profile expand folder 8 and verify that 2376 is present (highlighted in green box), then click on the Master tab (highlighted orange box) and click on Write FA FP (highlighted red box) if all goes right there shouldn't be any errors popping up.



16.On the left tab click on expert mode thencoding (highlighted in orange), after if opens, click on Read and save, name the file diffrentely for our example i added coded in the end of file name, feel free to name it whatever you want.




17. After Read and Save, expand all the files and find Ho-wort and look for SBRE and in vehicle profile look for folder 8 and subfolder 2376 this means is has been written into the car but we still have to code into the module for it to be completed.



18. Now we need to code the new HO-WORT into the appropriate Module, click on the Read ECU (highlighted in red) and SAVE a copy.




19. In the SVT section, find DSC2 right click and select Code...this will take 1-5 mins and you'll see an ABS Warning message that will pop up for a second and disappear as it should resolve on its on (ESYS will erase the fault code automatically) it should not reappear.



20. If you did it all correctly you should have no errors and you'll get a abgeschlossen bearbeitung (process completed) dialog and a close button. (didn't get the image of it). Click close and another popup will appear and will ask you to save a text on what it did, it's up to you if you want to save it or not doesn't hurt either ways.

21. Click disconnect and your done. You now have successfully coded M Sport brake on your X5




I haven't driven it yet so I'll find out this afternoon on how it goes, it is super late lol its 0500 as of now time for some ZzZzZzZz
Hey, I'm trying to code these brakes and I have run into some trouble at the very last set to code DSC module process gets started by at the end I get this message:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2019/09/19-19:35:27.011
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[DSC2 - 29] prepareECUforCoding started
[DSC2 - 29] prepareECUforCoding finished
[DSC2 - 29] authenticateECUforCoding started
[DSC2 - 29] authenticateECUforCoding finished
[DSC2 - 29 - cafd_00000c18-016_052_001] Transaction type: cdDeploy; Message: TA started
[DSC2 - 29 - cafd_00000c18-016_052_001] Transaction type: cdDeploy; Message: TA finished
[DSC2 - 29] finalizeECUCoding started
[DSC2 - 29] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "19s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MSM update finished. [C216]
VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
MCDDiagService<id=272649, job=com.bmw.psdz.jobs.uds.vcm.MCD3_WriteFAtoVCMBac kup, service=WDBI_FA1 - WriteDataByIdentifier FA Teil 1, description=error: negative response : requestOutOfRange, link=VCM_BACKUP_ETHERNET>
VCM Update: finished with error. [C196][Error in VCM Update:] There was an error, please check the log files.

[] - [Exception - VCM_BACKUP - 40] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR


Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR
[433]
Abarbeitung beendet

I'm not sure why I'm getting this message follow everything to the T step by step If any one can help me out I will be very thankful. I heard that the pedal is mushy without coding but mine is rock solid when car is off but when I turn it on when depressed it slowly almost goes down to the floor when pumped couple times hard again that is when the car on, is that how mushy it is without coding? anyhow I would like to resolve this coding issue any help will be greatly appreciated.

Thanks
Appreciate 0
      09-19-2019, 11:03 PM   #656
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by Radekxpl View Post
Quote:
Originally Posted by Mr.47 View Post
I had a hard time trying to figure out how the hell to code this damn brakes, however after a few hours of youtube videos and sifting thru post after post, I finally figured it out and wanted to write a comprehensive coding in ESYS 3.27.1 since there isn't any pertaining to our F15 X5 M sport brake coding.

Disclaimer: I'm not responsible for any damages, injuries or death following this steps...I'm hardly an novice and more of an imbecile when it comes to coding BMW...so if your unsure on following these steps seek an expert coder for assistance.


Pre-step, Make sure your car is hooked up to an battery charger with at least 14V to prevent vehicle from going into sleep mode. Leave keys in the vehicle, and hit start button without starting engine (no foot on brakes) and connect OBD to your computer/laptop with ESYS

1. Start connection click on the Icon that is highlighted in red




2.Select F025 and click connect this is F15 X5 F16 X6 specific, this may take a moment (WHATEVER YOU DO NOT SELECT DIRECT)



3. Click read then save



4. Save it securely, you may choose any name for our example we'll use "feb 26 fa 3"



5. After saving click EDIT and it should automatically take you to FA-Editor




6. Expand all the folders and find HO-WORT, Right Click, select NEW and click on HO-WORT



8. You'll be prompted with a small text box within the drop down folders, type in SBRE and hit enter. (SBRE is for F15 M sport brake code)



9. Right click on the FA folder, then click on calculate FP



10. It should populate the vehicle profile with no error message...now if your ESYS is working properly it should show "Aftermarket Addon", in our case its folder 8, expand folder 8 and it should be another folder with 2376, which is 18in sportbrake for F15, this confirms that file is coded and ready to be written on vehicle. Besure to click the save disk (highlighted in red) to save it.




11. Look over to the left tab and click on "Expert Mode" then click on VCM and you should see a screen like this.



12. Next look down and find for vehicle order section, select file tab and click the |...| box (highlighted in red) to load the file that we saved on the FA editor. In our case the feb 26 fa 3.xml




13 Expand the FA files and find the HO-WORT to verify the SBRE is added



14. Right click on FA and click on calculate FP this should populate the Vehicle profile section with folders



15. In the Vehicle profile expand folder 8 and verify that 2376 is present (highlighted in green box), then click on the Master tab (highlighted orange box) and click on Write FA FP (highlighted red box) if all goes right there shouldn't be any errors popping up.



16.On the left tab click on expert mode thencoding (highlighted in orange), after if opens, click on Read and save, name the file diffrentely for our example i added coded in the end of file name, feel free to name it whatever you want.




17. After Read and Save, expand all the files and find Ho-wort and look for SBRE and in vehicle profile look for folder 8 and subfolder 2376 this means is has been written into the car but we still have to code into the module for it to be completed.



18. Now we need to code the new HO-WORT into the appropriate Module, click on the Read ECU (highlighted in red) and SAVE a copy.




19. In the SVT section, find DSC2 right click and select Code...this will take 1-5 mins and you'll see an ABS Warning message that will pop up for a second and disappear as it should resolve on its on (ESYS will erase the fault code automatically) it should not reappear.



20. If you did it all correctly you should have no errors and you'll get a abgeschlossen bearbeitung (process completed) dialog and a close button. (didn't get the image of it). Click close and another popup will appear and will ask you to save a text on what it did, it's up to you if you want to save it or not doesn't hurt either ways.

21. Click disconnect and your done. You now have successfully coded M Sport brake on your X5




I haven't driven it yet so I'll find out this afternoon on how it goes, it is super late lol its 0500 as of now time for some ZzZzZzZz
Hey, I'm trying to code these brakes and I have run into some trouble at the very last set to code DSC module process gets started by at the end I get this message:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2019/09/19-19:35:27.011
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[DSC2 - 29] prepareECUforCoding started
[DSC2 - 29] prepareECUforCoding finished
[DSC2 - 29] authenticateECUforCoding started
[DSC2 - 29] authenticateECUforCoding finished
[DSC2 - 29 - cafd_00000c18-016_052_001] Transaction type: cdDeploy; Message: TA started
[DSC2 - 29 - cafd_00000c18-016_052_001] Transaction type: cdDeploy; Message: TA finished
[DSC2 - 29] finalizeECUCoding started
[DSC2 - 29] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "19s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MSM update finished. [C216]
VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
MCDDiagService<id=272649, job=com.bmw.psdz.jobs.uds.vcm.MCD3_WriteFAtoVCMBac kup, service=WDBI_FA1 - WriteDataByIdentifier FA Teil 1, description=error: negative response : requestOutOfRange, link=VCM_BACKUP_ETHERNET>
VCM Update: finished with error. [C196][Error in VCM Update:] There was an error, please check the log files.

[] - [Exception - VCM_BACKUP - 40] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR


Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR
[433]
Abarbeitung beendet

I'm not sure why I'm getting this message follow everything to the T step by step If any one can help me out I will be very thankful. I heard that the pedal is mushy without coding but mine is rock solid when car is off but when I turn it on when depressed it slowly almost goes down to the floor when pumped couple times hard again that is when the car on, is that how mushy it is without coding? anyhow I would like to resolve this coding issue any help will be greatly appreciated.

Thanks
Does one need to code brakes though? I think if you're doing regular driving, wouldn't think so?
Appreciate 0
      09-20-2019, 12:09 AM   #657
Rydogg21
Private First Class
United_States
99
Rep
149
Posts

Drives: BMW X5 35D
Join Date: May 2014
Location: Denver, CO

iTrader: (0)

Quote:
Originally Posted by djrabbi View Post
Does one need to code brakes though? I think if you're doing regular driving, wouldn't think so?
Youre thinking too much without reading the thread to learn...

Once you do this upgrade, you will quickly realize that the brake pedal has about 40% of the 100% stock throw available and makes it tough to stop quickly. Makes it difficult to properly bed the rotors and pads as well.

Once the coding was complete (about 10 mins if you know what youre doing) the braking power increases to be considerably more stout than stock. The brakes pedal is responsive from 0-100% and you feel like the $$$ was well spent.

The choice is yours, skip this step, lose braking ability compared to stock and spend the $$ for a downgrade in performance. Or....do it right and reap the benefits of the upgrade.
Appreciate 1
CT335xi682.50
      09-20-2019, 12:16 AM   #658
Rydogg21
Private First Class
United_States
99
Rep
149
Posts

Drives: BMW X5 35D
Join Date: May 2014
Location: Denver, CO

iTrader: (0)

[QUOTE=Radekxpl;
I'm not sure why I'm getting this message follow everything to the T step by step If any one can help me out I will be very thankful. I heard that the pedal is mushy without coding but mine is rock solid when car is off but when I turn it on when depressed it slowly almost goes down to the floor when pumped couple times hard again that is when the car on, is that how mushy it is without coding? anyhow I would like to resolve this coding issue any help will be greatly appreciated.

Thanks[/QUOTE]

Revert and go back through the steps again. It looks like you missed something along the way. I used these same directions, going about it step-by-step, and it worked the very first time. I did have some trouble getting E-sys to connect to my car correctly but once I was connected it was completed using the directions listed with screenshots. Hope this helps.
Appreciate 0
      09-20-2019, 02:53 AM   #659
Mr.47
First Lieutenant
Mr.47's Avatar
479
Rep
317
Posts

Drives: F15 X5 35d
Join Date: Oct 2017
Location: Oklahoma

iTrader: (0)

Quote:
Originally Posted by Radekxpl View Post
o

Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR
[433]
Abarbeitung beendet

I'm not sure why I'm getting this message follow everything to the T step by step If any one can help me out I will be very thankful. I heard that the pedal is mushy without coding but mine is rock solid when car is off but when I turn it on when depressed it slowly almost goes down to the floor when pumped couple times hard again that is when the car on, is that how mushy it is without coding? anyhow I would like to resolve this coding issue any help will be greatly appreciated.

Thanks
Hmm...It appears you may have some settings issue.

First off make sure your using the correct link ie on the open connection F25 without direct connect.



Second thing would be looking at options menu, I when searching on google and found a post from another forum who appears to have the same error/issue you have. You'll need to turn off VCM and MSM TAL updates (thanks to TokenMaster for point that out)

Open Esys and go to option (Red) and then settings (Green)


Then Find the options tab (green) and make sure
"Update VCM after TAL execution" and "Update MSM after TAL execution" are unchecked. Then hit ok.




Post Information Source
https://www.bimmerfest.com/forums/ar.../t-785766.html
Attached Images
  
Appreciate 0
      09-20-2019, 06:38 AM   #660
djrabbi
Lieutenant Colonel
djrabbi's Avatar
United_States
724
Rep
1,658
Posts

Drives: G05 M50i
Join Date: Apr 2015
Location: Raleigh

iTrader: (1)

Quote:
Originally Posted by Rydogg21 View Post
Quote:
Originally Posted by djrabbi View Post
Does one need to code brakes though? I think if you're doing regular driving, wouldn't think so?
Youre thinking too much without reading the thread to learn...

Once you do this upgrade, you will quickly realize that the brake pedal has about 40% of the 100% stock throw available and makes it tough to stop quickly. Makes it difficult to properly bed the rotors and pads as well.

Once the coding was complete (about 10 mins if you know what youre doing) the braking power increases to be considerably more stout than stock. The brakes pedal is responsive from 0-100% and you feel like the $$$ was well spent.

The choice is yours, skip this step, lose braking ability compared to stock and spend the $$ for a downgrade in performance. Or....do it right and reap the benefits of the upgrade.
I guess I will need to find someone in NJ in the spring time when I put these on
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:38 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST