Easy Exit Driver Seat coding

w2830 · 02-26-2017, 01:28 AM

Quote:

Originally Posted by iconoclast

the seats and steering wheel adjust faster than the cold start idle hunt/cat pre-heat stag is over. before the motor is even ready to be put in drive your seat adjustment is completed. if you drive off before the memory sequence is completed the system will stop and it will not go to your stored position. at that point you would have to get the adjustments done by holding down the 1 or 2 button.

Fair enough

Bt12 · 01-20-2018, 07:57 PM

anyone using bimmercode app make this work?

Almaretto · 01-20-2018, 08:37 PM

Quote:

Originally Posted by Bt12

anyone using bimmercode app make this work?

No, but codes are the same.

Bt12 · 01-21-2018, 09:22 AM

Quote:

Originally Posted by Almaretto

No, but codes are the same.

Thanks man used the same codes and changed all the distances as well, didn’t work so... I just gave up.

Almaretto · 01-21-2018, 10:50 AM

Quote:

Originally Posted by Bt12

Thanks man used the same codes and changed all the distances as well, didn’t work so... I just gave up.

Worked on my F15. Must code BDC_Body and SM.

Maverik259 · 01-21-2018, 09:45 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Bt12

Thanks man used the same codes and changed all the distances as well, didn’t work so... I just gave up.

Worked on my F15. Must code BDC_Body and SM.

In the app?

Almaretto · 01-22-2018, 12:43 AM

Quote:

Originally Posted by Maverik259

In the app?

App or E-sys. I only use the latter.

Bt12 · 01-23-2018, 05:21 AM

Quote:

Originally Posted by Almaretto

App or E-sys. I only use the latter.

Thanks man... I don’t have e-sys. app doesn’t work in expert mode. So I just gave up

Almaretto · 01-23-2018, 09:11 AM

Quote:

Originally Posted by Bt12

Thanks man... I don’t have e-sys. app doesn’t work in expert mode. So I just gave up

DuSh · 01-23-2018, 01:12 PM

I love that option, but I switched off column and seat memory adjustment on entry/exit - simply because that's a fast forward way to get yourself a dead steering column and seat. Sure if you are under warranty, but mine ends in March and it's just my luck that things won't break until warranty is done lol. And even with warranty - check the threads about steering column been slightly off center and car never drove same again after warranty replacement. Not going to venture into this never ending headache only to get easy exit/entry
So I'll pass on that one

CatalinP · 01-23-2018, 01:17 PM

Kindly share how did you disable it. Thanks!

Almaretto · 01-23-2018, 01:19 PM

Quote:

Originally Posted by DuSh

I love that option, but I switched off column and seat memory adjustment on entry/exit - simply because that's a fast forward way to get yourself a dead steering column and seat. Sure if you are under warranty, but mine ends in March and it's just my luck that things won't break until warranty is done lol. And even with warranty - check the threads about steering column been slightly off center and car never drove same again after warranty replacement. Not going to venture into this never ending headache only to get easy exit/entry
So I'll pass on that one

Why not enjoy it while it works? If it fails, can you not just opt not to fix and essentially have uncoded seats?

DuSh · 01-23-2018, 06:14 PM

Quote:

Originally Posted by Almaretto

Why not enjoy it while it works? If it fails, can you not just opt not to fix and essentially have uncoded seats?

Yes, but what if it brakes in the most recessed position (seat and/or steering column) - that will make driving hell and I'll have to fix it from my own pocket. Couple owners here have had steering column stop working in the morning when they first started the car - steering column just didn't move and stayed in the most up and retracted position - this will be fun to drive

That been said - I don't think seat control will brake, unlike steering column faults, seats are so far proven without issues (knocking on the wood)

iconoclast · 01-23-2018, 06:54 PM

using the same logic one could say you should never fold your mirrors or open the hatch since one day it will fail and you'll have to repair it out of pocket. buy it, use it, repair it if necessary.

DuSh · 01-23-2018, 07:02 PM

Quote:

Originally Posted by iconoclast

using the same logic one could say you should never fold your mirrors or open the hatch since one day it will fail and you'll have to repair it out of pocket. buy it, use it, repair it if necessary.

Agree. With the only exception been steering column - there's a real reliability issue well documented on forum - mine is making noises when moving already. However, I agree, if you are under warranty and enjoy this feature - then by all means use it

iconoclast · 01-23-2018, 07:03 PM

mine happened exactly at the 1yr anniversary.
i believe daily drivers may experience this failure sooner.
shame bmw has not found a permanent resolution to this issue.

mkdan2004 · 01-25-2018, 08:18 AM

My steering wheel/column failed at start-up at the most recessed position. It would still go up and down but not out. Was covered under warranty but had it not been covered by it, dealer said it would cost a fortune to replace. Also, i had to drive my car daily, barely reaching the steering wheel for a few weeks until the parts arrived. How can anyone find this option useful is beyond me. After the car was fixed, i disabled this option trough coding and i would not have it any other way. While i was at it, i disabled the seat adjustment as well and still no regrets.

pits200 · 02-10-2018, 11:23 PM

Did some coding today through e-sys, been looking around, how do I turn off the steering wheel tilt. Can some give me the exact functions, I found a few for the e70 but nothing exact for the f15/25.

Thanks

DuSh · 02-11-2018, 12:49 AM

Quote:

Originally Posted by pits200

Did some coding today through e-sys, been looking around, how do I turn off the steering wheel tilt. Can some give me the exact functions, I found a few for the e70 but nothing exact for the f15/25.

Thanks

Mine was coded out together when I flashed DMEs so I wish I knew exact lines - I would gladly help

Maybe Almaretto can chime in, he knows more about coding

CatalinP · 02-11-2018, 01:14 AM

For F15 set the following to "Aktiv":
BDC Body -- V_MAX_AKTIVER_EINSTIEG_AKTIV
BDC Body -- V_MAX_DEAKTIVIER_EINSTIEG_AKTIV

Then check that the following have: wert_01 = 00 00
BDC Body -- V_MAX_AKTIVIERUNG_EINSTIEG
BDC Body -- V_MAX_DEAKTIVIER_EINSTIEG

Almaretto · 02-12-2018, 12:10 AM

Quote:

Originally Posted by DuSh

Mine was coded out together when I flashed DMEs so I wish I knew exact lines - I would gladly help

Maybe Almaretto can chime in, he knows more about coding

I enjoy my Easy entry so I never tried coding out.

Marky Mark · 03-08-2018, 09:50 PM

Thanks for all the input, but I'd like to get the seats to also move down to the lowest setting (the wife is short and struggles getting in).

I know that you can program each axis separately, but does anyone know how to code the different axis'?

01-20-2018, 07:57 PM	#24
Bt12 Captain 391 Rep 960 Posts Drives: 2018 X5,2018 m2, 2018 x1 Join Date: Sep 2017 Location: Bicoastal iTrader: (0)	anyone using bimmercode app make this work?
	Appreciate 0 Quote

01-23-2018, 01:12 PM	#32
DuSh Colonel 2114 Rep 2,388 Posts Drives: F15 X5 50i Join Date: Jul 2017 Location: USA iTrader: (0)	I love that option, but I switched off column and seat memory adjustment on entry/exit - simply because that's a fast forward way to get yourself a dead steering column and seat. Sure if you are under warranty, but mine ends in March and it's just my luck that things won't break until warranty is done lol. And even with warranty - check the threads about steering column been slightly off center and car never drove same again after warranty replacement. Not going to venture into this never ending headache only to get easy exit/entry So I'll pass on that one
	Appreciate 0 Quote

01-23-2018, 01:17 PM	#33
CatalinP Major 590 Rep 1,261 Posts Drives: BMW X5 F15 2014 3.0xd Join Date: Aug 2017 Location: RO iTrader: (0)	Kindly share how did you disable it. Thanks!
	Appreciate 0 Quote

01-23-2018, 06:54 PM	#36
iconoclast Self-Deprecating Narcissist 7263 Rep 6,561 Posts Drives: Audi BMW Ferrari LR MB Join Date: Jan 2014 Location: In, Out & Around... iTrader: (1)	using the same logic one could say you should never fold your mirrors or open the hatch since one day it will fail and you'll have to repair it out of pocket. buy it, use it, repair it if necessary. __________________ http://www.instagram.com/_.iconoclast/
	Appreciate 2 DuSh2113.50 CanadianLurker41.00 Quote

01-23-2018, 07:03 PM	#38
iconoclast Self-Deprecating Narcissist 7263 Rep 6,561 Posts Drives: Audi BMW Ferrari LR MB Join Date: Jan 2014 Location: In, Out & Around... iTrader: (1)	mine happened exactly at the 1yr anniversary. i believe daily drivers may experience this failure sooner. shame bmw has not found a permanent resolution to this issue. __________________ http://www.instagram.com/_.iconoclast/
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
Easy Exit Driver Seat coding

01-25-2018, 08:18 AM	#39
mkdan2004 Private First Class 48 Rep 103 Posts Drives: BMW X5 F15 Join Date: Jun 2017 Location: Bucharest, Romania iTrader: (0)	My steering wheel/column failed at start-up at the most recessed position. It would still go up and down but not out. Was covered under warranty but had it not been covered by it, dealer said it would cost a fortune to replace. Also, i had to drive my car daily, barely reaching the steering wheel for a few weeks until the parts arrived. How can anyone find this option useful is beyond me. After the car was fixed, i disabled this option trough coding and i would not have it any other way. While i was at it, i disabled the seat adjustment as well and still no regrets.
	Appreciate 0 Quote

02-10-2018, 11:23 PM	#40
pits200 Colonel 547 Rep 2,590 Posts Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh iTrader: (1)	Did some coding today through e-sys, been looking around, how do I turn off the steering wheel tilt. Can some give me the exact functions, I found a few for the e70 but nothing exact for the f15/25. Thanks
	Appreciate 0 Quote

02-11-2018, 01:14 AM	#42
CatalinP Major 590 Rep 1,261 Posts Drives: BMW X5 F15 2014 3.0xd Join Date: Aug 2017 Location: RO iTrader: (0)	For F15 set the following to "Aktiv": BDC Body -- V_MAX_AKTIVER_EINSTIEG_AKTIV BDC Body -- V_MAX_DEAKTIVIER_EINSTIEG_AKTIV Then check that the following have: wert_01 = 00 00 BDC Body -- V_MAX_AKTIVIERUNG_EINSTIEG BDC Body -- V_MAX_DEAKTIVIER_EINSTIEG
	Appreciate 3 DuSh2113.50 iconoclast7262.50 Flee61561.50 Quote

03-08-2018, 09:50 PM	#44
Marky Mark Private 42 Rep 61 Posts Drives: 2014 xDrive35i Join Date: Feb 2017 Location: Lower Westchester, NY iTrader: (0)	Thanks for all the input, but I'd like to get the seats to also move down to the lowest setting (the wife is short and struggles getting in). I know that you can program each axis separately, but does anyone know how to code the different axis'? __________________ 2014 X5 xDrive35i: MPPK+MPE, Premium Package, xLine, Driver Assistance Plus, Driver Assistance Package, Lighting Package, Luxury Seating Package, Cold Weather Package, Night Vision w/Pedestrian Detection, ACC Stop& Go + Active Driving Assistant, harmon/kardon Surround Sound System, Space-Saver Spare, 4-Zone Automatic Climate Control, Poplar Wood Trim, towing package
	Appreciate 0 Quote