BMW Coding Thread

SaskRiverRat · 04-01-2019, 08:38 AM

could I possibly get a link to the latest PSdZData
Please and thanks.

David3 · 04-01-2019, 01:40 PM

Quote:

Originally Posted by David3

So, successfully VO and FDL coded AGHB, TJA to my 2015 F15. But, I am having trouble coding my newly installed trailer lighting module (AAG). I VO coded 3AC, but cannot code it to the module as the “Code” option is grayed out. Also, no CAFD file for FDL coding.

Is my PSdZData file too old? Something else I did wrong? Currently getting trailer hitch electrical/bulb fault. Any ideas?

Should I post this question elsewhere

I was able to load CAFD file and attempt to remove electric hitch options. But, I still get Trailer Electrical fault error message.

Anyone have any thoughts on what to look for or how to correct?

David3 · 04-01-2019, 01:47 PM

Quote:

Originally Posted by X Mon™

Or do the coding via ESys. It's a total of 7 modules, including the AAG.

Do you mean VO code 7 modules with 3AC added? Or do you mean FDL code 7 modules. And, which modules?

Currently, I am simply trying to get the errors cleared (have not tested trailer lights). Then, i can work on getting the trailer stability controls working.

X Mon™ · 04-01-2019, 02:21 PM

Quote:

Originally Posted by David3

I was able to load CAFD file and attempt to remove electric hitch options. But, I still get Trailer Electrical fault error message.

Anyone have any thoughts on what to look for or how to correct?

1) If you have the CAFD injected, you shouldn't betting the electrical fault error message. That's typically associated with the module being installed but the CAFD file not being in place.
2) Something is incorrectly wired from the original installation.

Quote:

Originally Posted by David3

Do you mean VO code 7 modules with 3AC added? Or do you mean FDL code 7 modules. And, which modules?

Currently, I am simply trying to get the errors cleared (have not tested trailer lights). Then, i can work on getting the trailer stability controls working.

FDL, the AAG + the six others listed in the PM I sent.

Almaretto · 04-01-2019, 08:39 PM

Quote:

Originally Posted by KDKE30

where can I find this file?

C:\data\pszdata\swe\FAFP

ferrarif1 · 04-01-2019, 08:56 PM

Quote:

Originally Posted by David3

So, successfully VO and FDL coded AGHB, TJA to my 2015 F15. But, I am having trouble coding my newly installed trailer lighting module (AAG). I VO coded 3AC, but cannot code it to the module as the “Code” option is grayed out. Also, no CAFD file for FDL coding.

Is my PSdZData file too old? Something else I did wrong? Currently getting trailer hitch electrical/bulb fault. Any ideas?

Should I post this question elsewhere

Why are you adding 3AC? The electric folding hitch is not available in the US.

Try this:
1) Add 'K235' to HO-Wort in your VO
2) VO Code entire car
3) Make sure correct CAFD is injected in trailer module (AAG)
4) Test trailer lights

Other option is in ISTA+ to go to "retrofit" and add trailer module which will add K235 and code all modules impacted (which is a lot).

KDKE30 · 04-01-2019, 11:22 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by KDKE30

where can I find this file?

C:\data\pszdata\swe\FAFP

Thank You very much

alphaod · 04-02-2019, 01:11 AM

Quote:

Originally Posted by X Mon™

Or do the coding via ESys. It's a total of 7 modules, including the AAG.

I was not aware that the trailer retrofit was an option via Esys…

X Mon™ · 04-02-2019, 07:13 AM

Quote:

Originally Posted by ferrarif1

Why are you adding 3AC? The electric folding hitch is not available in the US.

Try this:
1) Add 'K235' to HO-Wort in your VO
2) VO Code entire car
3) Make sure correct CAFD is injected in trailer module (AAG)
4) Test trailer lights

Other option is in ISTA+ to go to "retrofit" and add trailer module which will add K235 and code all modules impacted (which is a lot).

3AC will work, provided you FDL code the correct lines back to the non-folding hitch. I went this route, as I can actually look at the changes 3AC makes to all of the modules using the TokenMaster comparison tool.

If someone with K235 programmed is up for sending over their 7 CAFD files for the modules, I'd be curious to look at any differences in end result using the comparison tool.

Indigo · 04-07-2019, 10:44 AM

Sorry if this this been discussed but I did try but not sure what keyword to use.
I coded my F10 for "flash to pass" so the headlight flash like strobe/police like. it was 3 years ago when I code my F10 and I cant remember where did I read it. any one knows which one that I need to code for F15?

shawnsheridan · 04-07-2019, 11:09 AM

Quote:

Originally Posted by SaskRiverRat

could I possibly get a link to the latest PSdZData
Please and thanks.

PM sent.

nyquistcondition · 04-07-2019, 08:27 PM

I'm running the Launcher 2.8.2 and the re-arm 2.0.4. I run through the setup instructions in the .pdf (all very clear). When I run the launcher for the first time, enter the PIN, and generate the token, I get a success message. But no .est file appears in the Tokenmaster directory, and E-SYS options are never configured to point to that location.

Any idea why the .est file isn't appearing despite everything appearing to go as normal? I have the date set for October 2018 and am successfully running the re-arm tool.

shawnsheridan · 04-07-2019, 08:28 PM

Quote:

Originally Posted by nyquistcondition

I'm running the Launcher 2.8.2 and the re-arm 2.0.4. I run through the setup instructions in the .pdf (all very clear). When I run the launcher for the first time, enter the PIN, and generate the token, I get a success message. But no .est file appears in the Tokenmaster directory, and E-SYS options are never configured to point to that location.

Any idea why the .est file isn't appearing despite everything appearing to go as normal? I have the date set for October 2018 and am successfully running the re-arm tool.

I cannot help with the Rearm Script. I never use it myself as I have working PRO version. You need to contact the Rearm Script Developer Tony and ask him.

nyquistcondition · 04-07-2019, 08:52 PM

Is there an option to buy proper software that works in 2019?

RED_Y_ · 04-07-2019, 10:16 PM

Quote:

Originally Posted by nyquistcondition

Is there an option to buy proper software that works in 2019?

If you are talking about E-sys Launcher Premium or pro-no , no one heard from Tokenmaster for a while. But there are alternatives like Bimmercode and ESysX.

nyquistcondition · 04-08-2019, 05:52 AM

Thanks - I'll check out esysx. Wanted to try Bimmercode, but not sure if expert mode will allow coding the modules needed for TJA and anti-glare High beams. I've already VO coded the high beams, so maybe BimmerCode can do that. But TJA should have VO ideally.

ifobd · 04-09-2019, 07:13 AM

My 2017 f22 idrive is stuck in a reboot loop after a Carly coding attempt and it won't stay up long enough to complete a restore from backup. I do not have Esys, but I would be willing to get it if there is any chance I can revive it... (or is a dealer trip required)? I get codes:
CD0487
E1C440
E1C603
801C15
801C20
E14600

Any thoughts on what best to do?

TIA

KDKE30 · 04-13-2019, 03:59 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by KDKE30

where can I find this file?

C:\data\pszdata\swe\FAFP

I found this folder, but I still do not know if there is any way to add options to F15:
SZHEA 21 *** 8243; LAW Y-spoke 375
SZC4A BMW Performance Interior Carbon moldings
SZPFA BMW Performance Alu pedal plates
SZP1A BMW Performance brake system
or 2NH M brakes
SZP8A BMW Performance Sport steering wheel
SZPHA BMW Performance Aerodynamics Package

Googone20 · 04-13-2019, 05:36 AM

Quote:

Originally Posted by ifobd

My 2017 f22 idrive is stuck in a reboot loop after a Carly coding attempt and it won't stay up long enough to complete a restore from backup. I do not have Esys, but I would be willing to get it if there is any chance I can revive it... (or is a dealer trip required)? I get codes:
CD0487
E1C440
E1C603
801C15
801C20
E14600

Any thoughts on what best to do?

TIA

Restore your backup and. Try coding it all again, but only do a couple changes at a time. I have been there before, and you just have to walk it back and go slow this time around.

ifobd · 04-13-2019, 11:47 AM

Quote:

Originally Posted by Googone20

Quote:

Originally Posted by ifobd

My 2017 f22 idrive is stuck in a reboot loop after a Carly coding attempt and it won't stay up long enough to complete a restore from backup. I do not have Esys, but I would be willing to get it if there is any chance I can revive it... (or is a dealer trip required)? I get codes:
CD0487
E1C440
E1C603
801C15
801C20
E14600

Any thoughts on what best to do?

TIA

Restore your backup and. Try coding it all again, but only do a couple changes at a time. I have been there before, and you just have to walk it back and go slow this time around.

Any advice on how to get the backup restore to complete? The reboot is too quick and causes the restore to fail before it finishes.

victorasmcars@hotmail.com · 04-14-2019, 12:20 AM

Where can I find profiles for NCS expert? The only thing I have been able to code were injectors, and I only have 2 profiles for my NCS expert. I'm guessing the more important one I need is Expert mode.

ixlr8 · 04-23-2019, 04:35 PM

Is there any way to prevent the vehicle from putting itself in park when trying to back up with the drivers door open?
I remember reading in one of the two coding threads that this question was asked, but I never saw any reply.

04-01-2019, 08:38 AM	#4753
SaskRiverRat Registered 0 Rep 4 Posts Drives: 2014 & 2018 X5 35i Join Date: Jan 2017 Location: Saskatchewan iTrader: (0)	could I possibly get a link to the latest PSdZData Please and thanks.
	Appreciate 0 Quote

04-07-2019, 10:44 AM	#4762
Indigo New Member 3 Rep 9 Posts Drives: 2012 F10 520D Join Date: Jul 2015 Location: Brighton, MA iTrader: (0)	Sorry if this this been discussed but I did try but not sure what keyword to use. I coded my F10 for "flash to pass" so the headlight flash like strobe/police like. it was 3 years ago when I code my F10 and I cant remember where did I read it. any one knows which one that I need to code for F15?
	Appreciate 0 Quote

04-07-2019, 08:27 PM	#4764
nyquistcondition Second Lieutenant 77 Rep 205 Posts Drives: None Join Date: Nov 2014 Location: New England, USA iTrader: (0)	I'm running the Launcher 2.8.2 and the re-arm 2.0.4. I run through the setup instructions in the .pdf (all very clear). When I run the launcher for the first time, enter the PIN, and generate the token, I get a success message. But no .est file appears in the Tokenmaster directory, and E-SYS options are never configured to point to that location. Any idea why the .est file isn't appearing despite everything appearing to go as normal? I have the date set for October 2018 and am successfully running the re-arm tool.
	Appreciate 0 Quote

04-07-2019, 08:52 PM	#4766
nyquistcondition Second Lieutenant 77 Rep 205 Posts Drives: None Join Date: Nov 2014 Location: New England, USA iTrader: (0)	Is there an option to buy proper software that works in 2019?
	Appreciate 0 Quote

04-08-2019, 05:52 AM	#4768
nyquistcondition Second Lieutenant 77 Rep 205 Posts Drives: None Join Date: Nov 2014 Location: New England, USA iTrader: (0)	Thanks - I'll check out esysx. Wanted to try Bimmercode, but not sure if expert mode will allow coding the modules needed for TJA and anti-glare High beams. I've already VO coded the high beams, so maybe BimmerCode can do that. But TJA should have VO ideally.
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

04-09-2019, 07:13 AM	#4769
ifobd Private 32 Rep 95 Posts Drives: 2017 M240i xdrive Join Date: Feb 2018 Location: PNW iTrader: (0)	Need help - iDrive stuck rebooting loop My 2017 f22 idrive is stuck in a reboot loop after a Carly coding attempt and it won't stay up long enough to complete a restore from backup. I do not have Esys, but I would be willing to get it if there is any chance I can revive it... (or is a dealer trip required)? I get codes: CD0487 E1C440 E1C603 801C15 801C20 E14600 Any thoughts on what best to do? TIA
	Appreciate 0 Quote

04-14-2019, 12:20 AM	#4773
victorasmcars@hotmail.com Registered 2 Rep 2 Posts Drives: 2009 135i FBO 6spd Join Date: Apr 2018 Location: Charlotte NC iTrader: (0)	Need Help. New with Programing. Where can I find profiles for NCS expert? The only thing I have been able to code were injectors, and I only have 2 profiles for my NCS expert. I'm guessing the more important one I need is Expert mode.
	Appreciate 0 Quote

04-23-2019, 04:35 PM	#4774
ixlr8 Private First Class 18 Rep 137 Posts Drives: 2016 X5 35i Join Date: Nov 2015 Location: Eastern Shore Virginia iTrader: (0)	Is there any way to prevent the vehicle from putting itself in park when trying to back up with the drivers door open? I remember reading in one of the two coding threads that this question was asked, but I never saw any reply.
	Appreciate 0 Quote