Coding your X5 the easy way

Maverik259 · 12-04-2018, 07:49 PM

Quote:

Originally Posted by mpowered5

Quote:

Originally Posted by Maverik259

Quote:

Originally Posted by motex

Quote:

Originally Posted by mastermayhm

nothin huh

Have you tried in section "Instrument Cluster" to activate "performance logo" and then into "performance logo variant" choose the one you are looking for?

I had the M550d logo easily on my car, I have the electronic cluster fyi

good luck

I've never seen one that is for just M performance. I've only gotten the M550d to work

My brother in law has a f30 335i. I was able to code the M performance on his. But not a digital cluster. I've tried on my x5 but could only get the m550d. From what I understood it's not available to get on the x5.

Same here. Now I'm lazy and stuck with M550d lol

daytonaviolet · 12-06-2018, 01:11 PM

need some help here guys. i have 6WA and i'm trying to code turnsignals in HUD. but i cant seem to find the last parameter. it's not in the specified location in expert mode. is it perhaps written differently? i've set the first two parameters to active.

tia

HUD Turnsignal (does not work on 6WB)
HU_NBT 3001 HUD_TURNSIGNAL
KOMBI 3008 HUD_PIA_BLINKER
KOMBI 3000 BLINKER_HUD_ENABLE

Maverik259 · 12-06-2018, 10:19 PM

Quote:

Originally Posted by daytonaviolet

need some help here guys. i have 6WA and i'm trying to code turnsignals in HUD. but i cant seem to find the last parameter. it's not in the specified location in expert mode. is it perhaps written differently? i've set the first two parameters to active.

tia

HUD Turnsignal (does not work on 6WB)
HU_NBT 3001 HUD_TURNSIGNAL
KOMBI 3008 HUD_PIA_BLINKER
[COLOR="Red"]KOMBI 3000 BLINKER_HUD_ENABLE[/COLOR]

Ya that's weird. Saw in demo mode it's not there anymore.

mrfochon · 12-06-2018, 10:23 PM

Is that what you are looking for ?
Use the search function and you ll find it under 3003

Hope this helps

daytonaviolet · 12-06-2018, 11:05 PM

thank you so much as the cheat sheet does say otherwise

KOMBI 3000 BLINKER_HUD_ENABLE

Quote:

Originally Posted by mrfochon

Is that what you are looking for ?
Use the search function and you ll find it under 3003

Hope this helps

daytonaviolet · 12-07-2018, 02:02 AM

Quote:

Originally Posted by mrfochon

Is that what you are looking for ?
Use the search function and you ll find it under 3003

Hope this helps

yes thanks.. it works now. but how do i search in bimmercode? thx

mrfochon · 12-07-2018, 06:11 AM

Pull the screen down. The same way you would search in the email or sms app. The search bar will appear then.

Marc412 · 12-07-2018, 08:10 AM

Hi

On my X5F15 , i have the HUD ( S610A ) , the High Beam Assistant ( S5ACA ) and the camera ( S3AGA ) and camera surround view ( S5DLA )

Is it possible by coding to add:
- Lane departure warning
- and Active Blind Spot Detection

Thanks

mrfochon · 12-07-2018, 12:48 PM

What is this option for ?
I thoughts it's the number of turn signals..

mrfochon · 12-07-2018, 02:57 PM

Anybody tried this option and can publish screenshot

Up - anybody knows what this option is for?

CatalinP · 12-08-2018, 09:46 AM

Quote:

Originally Posted by Marc412

Hi

On my X5F15 , i have the HUD ( S610A ) , the High Beam Assistant ( S5ACA ) and the camera ( S3AGA ) and camera surround view ( S5DLA )

Is it possible by coding to add:
- Lane departure warning
- and Active Blind Spot Detection

Thanks

No, as you are missing hardware for both: vibration motor in the steering wheel, 2 radars under the rear bumper and the warning lights in the mirrors.

hufington · 12-08-2018, 11:10 PM

Quote:

Originally Posted by CeeTeeX5

Open the cheat sheet: https://docs.google.com/spreadsheets...9s4/edit#gid=0

You'll need to go in to expert mode in the BDC Body module and find the function values that need to be updated. Update per the cheat sheet and you should be good to go.

Before trying this, I just wanted to make sure that this change will code the anti-dazzle function. Has anyone done this successfully?

I found the code on the cheatsheet and entered into Front Electronic Module/Car Access System then into Expert Mode and found the codes under 3073 Lamaster1. Thanks.

Fab's · 12-09-2018, 06:15 PM

Just coded mine, I was wondering if it's possible to display the M performance start animation in the HUD?

I am going to replace the nav screen with an aftermarket one (will do a post about it), any idea how it works for coding when you do that?

M3ANMACHINE · 12-09-2018, 11:14 PM

Got the VGate adapter delivered today and plugged it in and all the lights flash for a second initially, but then only the battery light remains on... has this happened to anyone else?

Maverik259 · 12-09-2018, 11:25 PM

Quote:

Originally Posted by daytonaviolet

Quote:

Originally Posted by mrfochon

Is that what you are looking for ?
Use the search function and you ll find it under 3003

Hope this helps

yes thanks.. it works now. but how do i search in bimmercode? thx

The 3 "..." in the top give you access to the search. It will search whatever you are currently in. The whole site, a sub thread, a single thread within the subthread etc.

mrfochon · 12-15-2018, 02:44 PM

Anyone know how this setting will effect the display or even tried and have screenshots

BimmerTy · 12-17-2018, 08:53 AM

I did my own coding through Bimmercode a few months ago and recently had had some things coded with E-Sys (anti-dazzle, VLD, acc start distance). It wiped out some of the previous coding (mirror fold on lock, ignition turn off when opening door, etc.).

My question is - do I need to recode these individually through Bimmercode OR can I restore all the coding done previously from a Bimmercode backup? I am assuming the VO codin from E-Sys will stick?

GiofromNJ · 12-17-2018, 09:07 AM

Quote:

Originally Posted by M3ANMACHINE

Got the VGate adapter delivered today and plugged it in and all the lights flash for a second initially, but then only the battery light remains on... has this happened to anyone else?

i got mine last week but it's not connecting via bimmercode -- it shows in my blutooth but won't connect...?

trebla193 · 12-17-2018, 09:41 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by lowlevelhell

1. Buy a vgate OBD II wifi adapter on Amazon ($24ish)
2. Download Bimmercode and pay $26.99 to unlock coding
3. Code your X5 to your liking

The only thing I wanted to do that I could was increase the fan speed, but I have a request in to the developer for help.

[COLOR="RoyalBlue"]Coding Made Easier (Cheat Codes in E-Sys Launcher)[/COLOR]

Buy $20 ENET
Download Free Software
Code any Fxx-/Ixx-/Gxx-series BMW using my and other authors' Launcher Cheat Codes

I have not the read the 400 posts in the thread. If anyone is offended by my question, I apologize in advance.

I have an obd, I do not have the different programs or codes you all mentioned. As a noob and never having altered anything or than a PLC, how do I get started?

Thanks,

Treb

Johnr3524 · 12-17-2018, 04:01 PM

Quote:

Originally Posted by trebla193

I have not the read the 400 posts in the thread. If anyone is offended by my question, I apologize in advance.

I have an obd, I do not have the different programs or codes you all mentioned. As a noob and never having altered anything or than a PLC, how do I get started?

Thanks,

Treb

I get it...It's a lot and I felt the same way. On the other hand, it didn't take long to read through the first several pages (say 15 or so) and get a pretty good sense of what I needed and how to start coding. Using the app itself is cake. So, cowboy up and dig in, you'll be ok.

Almaretto · 12-17-2018, 10:39 PM

Quote:

Originally Posted by trebla193

I have not the read the 400 posts in the thread. If anyone is offended by my question, I apologize in advance.

I have an obd, I do not have the different programs or codes you all mentioned. As a noob and never having altered anything or than a PLC, how do I get started?

Thanks,

Treb

https://www.bimmerfest.com/forums/sh...d.php?t=983245

wstuartj · 12-19-2018, 01:37 PM

Hi!

I successfully coded 6NS on my 2015 F15 and see the envelope in the iDrive when I receive a text message. But I don't receive any type of audio notification. Is this an option to have a tone or other sound play when a text is received?

Thanks!!

12-06-2018, 01:11 PM	#860
daytonaviolet OEM CSL Whore 1250 Rep 1,476 Posts Drives: 2017 F85 X5M Join Date: Dec 2006 Location: Bay Area, CA iTrader: (1)	need some help here guys. i have 6WA and i'm trying to code turnsignals in HUD. but i cant seem to find the last parameter. it's not in the specified location in expert mode. is it perhaps written differently? i've set the first two parameters to active. tia HUD Turnsignal (does not work on 6WB) HU_NBT 3001 HUD_TURNSIGNAL KOMBI 3008 HUD_PIA_BLINKER KOMBI 3000 BLINKER_HUD_ENABLE
	Appreciate 1 Fab's51.00 Quote

12-06-2018, 10:23 PM	#862
mrfochon Captain 211 Rep 626 Posts Drives: X5 F15 M package Join Date: Aug 2018 Location: NY iTrader: (0) Garage List 2000 BMW / 318 TDS ... [0.00] 2015 BMW / X5 [0.00]	Is that what you are looking for ? Use the search function and you ll find it under 3003 Hope this helps Attached Images
	Appreciate 1 daytonaviolet1250.00 Quote

12-07-2018, 06:11 AM	#865
mrfochon Captain 211 Rep 626 Posts Drives: X5 F15 M package Join Date: Aug 2018 Location: NY iTrader: (0) Garage List 2000 BMW / 318 TDS ... [0.00] 2015 BMW / X5 [0.00]	Pull the screen down. The same way you would search in the email or sms app. The search bar will appear then.
	Appreciate 1 daytonaviolet1250.00 Quote

12-07-2018, 08:10 AM	#866
Marc412 Enlisted Member 0 Rep 31 Posts Drives: Man Join Date: Mar 2015 Location: France iTrader: (0)	Hi On my X5F15 , i have the HUD ( S610A ) , the High Beam Assistant ( S5ACA ) and the camera ( S3AGA ) and camera surround view ( S5DLA ) Is it possible by coding to add: - Lane departure warning - and Active Blind Spot Detection Thanks
	Appreciate 0 Quote

12-07-2018, 12:48 PM	#867
mrfochon Captain 211 Rep 626 Posts Drives: X5 F15 M package Join Date: Aug 2018 Location: NY iTrader: (0) Garage List 2000 BMW / 318 TDS ... [0.00] 2015 BMW / X5 [0.00]	What is this option for ? I thoughts it's the number of turn signals.. Attached Images Last edited by mrfochon; 12-07-2018 at 02:48 PM..
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
Coding your X5 the easy way

12-07-2018, 02:57 PM	#868
mrfochon Captain 211 Rep 626 Posts Drives: X5 F15 M package Join Date: Aug 2018 Location: NY iTrader: (0) Garage List 2000 BMW / 318 TDS ... [0.00] 2015 BMW / X5 [0.00]	Anybody tried this option and can publish screenshot Up - anybody knows what this option is for? Attached Images
	Appreciate 0 Quote

12-09-2018, 06:15 PM	#871
Fab's Private 51 Rep 54 Posts Drives: X5 50i (& M3 E92 for sale) Join Date: Feb 2015 Location: United States iTrader: (0)	Just coded mine, I was wondering if it's possible to display the M performance start animation in the HUD? I am going to replace the nav screen with an aftermarket one (will do a post about it), any idea how it works for coding when you do that? Last edited by Fab's; 12-09-2018 at 06:27 PM..
	Appreciate 0 Quote

12-09-2018, 11:14 PM	#872
M3ANMACHINE Admiral 930 Rep 3,886 Posts Drives: 2011 E90 M3 + 2014 F15 X5 Join Date: Jan 2010 Location: Irvine, CA iTrader: (11)	Got the VGate adapter delivered today and plugged it in and all the lights flash for a second initially, but then only the battery light remains on... has this happened to anyone else? __________________ 2020 FORD RAPTOR 2014 F15 X5 \| M-SPORT SOLD 2011 SG E90 M3 \| 2008 AW E90 M3 \| 2004 E46 M3
	Appreciate 0 Quote

12-15-2018, 02:44 PM	#874
mrfochon Captain 211 Rep 626 Posts Drives: X5 F15 M package Join Date: Aug 2018 Location: NY iTrader: (0) Garage List 2000 BMW / 318 TDS ... [0.00] 2015 BMW / X5 [0.00]	Anyone know how this setting will effect the display or even tried and have screenshots Attached Images
	Appreciate 0 Quote

12-17-2018, 08:53 AM	#875
BimmerTy ///M 192 Rep 272 Posts Drives: 2015 F15 X5 50i M Sport Join Date: Sep 2018 Location: RVA iTrader: (0) Garage List 2015 BMW X5 xDrive50i [0.00]	I did my own coding through Bimmercode a few months ago and recently had had some things coded with E-Sys (anti-dazzle, VLD, acc start distance). It wiped out some of the previous coding (mirror fold on lock, ignition turn off when opening door, etc.). My question is - do I need to recode these individually through Bimmercode OR can I restore all the coding done previously from a Bimmercode backup? I am assuming the VO codin from E-Sys will stick? __________________ 2015 F15 X5 xDrive50i - M Sport - Space Grey Metallic - 21" 612M - Accelera Iota ST68's - Black Dakota - Leather Dash - Poplar Wood - Ceramic - Shawdowline - Anthracite - Adaptive M - Full LED - Executive - DA+ - Surround - HUD - Enhanced BT - Soft Close - B&O - ACC Stop & Go - Multi Contour - 4 Zone Climate - Comfort Seats - Cold Weather - Muffler Delete - Akrapovic Tips - F85 Grille - 35% Tint - BMW All Weather Mats -- Missing DHP, NV, Active Steering, Rear Entertainment, & Cooled Seats
	Appreciate 0 Quote

12-19-2018, 01:37 PM	#880
wstuartj New Member 2 Rep 26 Posts Drives: 2015 x5 3.5d Join Date: Sep 2007 Location: IL iTrader: (0)	Coded 6NS - audio notification? Hi! I successfully coded 6NS on my 2015 F15 and see the envelope in the iDrive when I receive a text message. But I don't receive any type of audio notification. Is this an option to have a tone or other sound play when a text is received? Thanks!!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search