BMW Coding Thread

[Radekxpl]

Hello, I'm trying to code SBRE and 2376 under vechicle profile at the last the setp where you try to code DSC module I get this message when pressing code:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2019/09/19-19:35:27.011
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[DSC2 - 29] prepareECUforCoding started
[DSC2 - 29] prepareECUforCoding finished
[DSC2 - 29] authenticateECUforCoding started
[DSC2 - 29] authenticateECUforCoding finished
[DSC2 - 29 - cafd_00000c18-016_052_001] Transaction type: cdDeploy; Message: TA started
[DSC2 - 29 - cafd_00000c18-016_052_001] Transaction type: cdDeploy; Message: TA finished
[DSC2 - 29] finalizeECUCoding started
[DSC2 - 29] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "19s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET>
MSM update finished. [C216]
VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
MCDDiagService<id=272649, job=com.bmw.psdz.jobs.uds.vcm.MCD3_WriteFAtoVCMBac kup, service=WDBI_FA1 - WriteDataByIdentifier FA Teil 1, description=error: negative response : requestOutOfRange, link=VCM_BACKUP_ETHERNET>
VCM Update: finished with error. [C196][Error in VCM Update:] There was an error, please check the log files.

[] - [Exception - VCM_BACKUP - 40] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR


Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
severity: ERROR
[433]
Abarbeitung beendet

IF anyone knows how to resolve this please chime in, I cant find a solution.

Thanks

[MK2018]

Anyone knows how to code Auto Wipers On all the time, is it actually possible?

[skoold2003]

Originally Posted by MK2018

Anyone knows how to code Auto Wipers On all the time, is it actually possible?

And auto high beams. WTF is the point of auto things if you have to turn them on?!?

[RED_Y_]

Originally Posted by skoold2003

And auto high beams. WTF is the point of auto things if you have to turn them on?!?

I would just code VLD and Anti-Glare beams.

[MK2018]

Originally Posted by RED_Y_

I would just code VLD and Anti-Glare beams.

I do have VLD and I really like it, I can't do Anti-Glare I don't have LED's just Xenon's

[djrabbi]

I put the M performance logo as active at start up in cluster but not showing? Maybe I'm missing it? I did the 6wb swap

[skoold2003]

Originally Posted by RED_Y_

I would just code VLD and Anti-Glare beams.

Is that the same as auto high beams?

[MK2018]

Originally Posted by skoold2003

Is that the same as auto high beams?

No

[skoold2003]

Originally Posted by MK2018

No

Thanks I'll give it a shot. Do I have to do anything different to enable them once I have them coded?

[MK2018]

Originally Posted by skoold2003

Thanks I'll give it a shot. Do I have to do anything different to enable them once I have them coded?

VLD after coded it's anabled

[skoold2003]

Originally Posted by MK2018

VLD after coded it's anabled

So I see that VLD is on the coding cheat sheet (from google docs) but I don't see Anti–Glare. Do changing those parameters enable AG as well or do I just have the wrong sheet?

[MK2018]

Originally Posted by skoold2003

So I see that VLD is on the coding cheat sheet (from google docs) but I don't see Anti–Glare. Do changing those parameters enable AG as well or do I just have the wrong sheet?

Try this:

https://www.bimmerpost.com/forums/sh...php?p=17665136

[f30er]

Originally Posted by skoold2003

And auto high beams. WTF is the point of auto things if you have to turn them on?!?

Auto wipers is a no brainer. That's what I was hoping to code in this weekend if I can find it.

[skoold2003]

Originally Posted by f30er

Auto wipers is a no brainer. That's what I was hoping to code in this weekend if I can find it.

If you have any luck let us know.

[Nav19580]

Hi there got an f15 m50d , can you put the m50d logo on the instrument cluster of all f15 m50ds?

[beholder]

Anyone know if you can code all doors to unlock when opening the tailgate with comfort access? I changed the setting in iDrive but it only works when i unlock with the button on the keyfob.

[trjn]

I have INPA and tools that I have been using for e46 and e92, but that version doesn't work on F cars. Is it possible to use the F chassis esys software and tools on E chassis versions? If so, could someone send me a link to download the new version along with token generator?
I will be using these software to change coding and also read/clear diagnostic codes on both my e and f chassis cars.
I use parallels in Mac to load windows, so even if I have to make two virtual machines to load the two versions if they don't work together on a single vm, it is fine. I bought the enet cable sometime ago by mistake for my e92, hoping that cable works on F cars.

Edit: I tried to PM the OP of the thread @opasha but looks like his inbox is full. I'd really appreciate if some one can send me the links to download the software and token generator.
Thanks

[djrabbi]

Is there an option in bimmercode to default to factory? I don't see anything 🤷🏽*♂️

[mzdial]

Hey shawnsheridan , can you message me the latest PSDz files and Esys?

I'm on E-Sys_Setup-3.33.0-53640_64bit
and the data files are v.4.17.31_PSdZData_Lite.rar (which seems odd)

I'm having trouble with not being able to read some CAFD files.

Thanks!

[shawnsheridan]

Originally Posted by trjn

...Is it possible to use the F chassis esys software and tools on E chassis versions?...

No, not possible. You have to use NCS Expert and DCAN Cable to code Exx cars.

[shawnsheridan]

Originally Posted by mzdial

Hey shawnsheridan , can you message me the latest PSDz files and Esys?

I'm on E-Sys_Setup-3.33.0-53640_64bit
and the data files are v.4.17.31_PSdZData_Lite.rar (which seems odd)

I'm having trouble with not being able to read some CAFD files.

Thanks!

PM sent.

[trjn]

Originally Posted by shawnsheridan

No, not possible. You have to use NCS Expert and DCAN Cable to code Exx cars.

Thanks for confirming. I don't mind having two different applications in the VM, it's not a problem at all. I already installed esys and the supplemental files within parallels in my Mac. But the two supposedly enet cables are not able to communicate with my computer. I see the ip addresses but the vin option is greyed out. May be the token I have is not good? Not sure what I am doing wrong.