10-10-2023, 04:30 PM | #1 |
Registered
0
Rep 1
Posts |
F16 n55 valvetronic relay no voltage
Hello,
i'm new to X5/X6 platform, but I've been driving BMWs for 15 years so I know basic maintenance. Recently I've bought a 2014 f16 35i N55 with CEL. It has 2 codes: -valvetronic relay activation; line disconnection -valvetronic supply voltage; line disconnection the car drives, starts, pulls ok and has plenty of power. I've checked voltage on the module PN 12638645514 and the valvetronic section showed 0 volts. So I ordered new one from the dealership, switched and nothing changed. Now I don't know if both modules went bad or do I have to check something else. Maybe there is something to look at before I buy new servomotor and another module? Maybe DME is faulty? When I pulled out the plug from the servomotor, it threw other codes as well. I'm at loss and I will be very grateful if somebody could help me with this issue. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|