10-13-2018, 04:29 PM | #1 |
Lieutenant
210
Rep 451
Posts
Drives: 2017 X5 & 2020 X5
Join Date: Mar 2014
Location: Mackay Queensland
|
Surround camera module location and replacement
Hi there
can anyone tell where the ZB iCAM-4-Cam-ECU is located? Mine has crashed whilst the dealer was upgrading the ECU's to the latest i Levels. They did not have one in stock at the time to replace under warranty. I have found a used one at a price much lower than it would cost me to drive to the dealer (900 kms return) plus overnight accommodation. My next scheduled service is August next year. My next question has anyone actually replaced theirs and what coding if any, did they have to do to make it work. I have E Sys and can do the basics. Thanks in advance
__________________
Current: MY 20 X5 2.5d xDrive MSport
MY 17 X5 2.5d sDrive |
10-13-2018, 05:00 PM | #3 | |
Lieutenant
210
Rep 451
Posts
Drives: 2017 X5 & 2020 X5
Join Date: Mar 2014
Location: Mackay Queensland
|
Quote:
I would think if it is a new part it would have to be flashed initially hence they need the car.Is it possible for a dealer to flash an ECU remotely through Connected Drive?
__________________
Current: MY 20 X5 2.5d xDrive MSport
MY 17 X5 2.5d sDrive |
|
Appreciate
0
|
10-13-2018, 05:00 PM | #4 |
Private First Class
89
Rep 143
Posts |
|
Appreciate
0
|
10-13-2018, 05:16 PM | #5 | |
Lieutenant
210
Rep 451
Posts
Drives: 2017 X5 & 2020 X5
Join Date: Mar 2014
Location: Mackay Queensland
|
Quote:
https://rover.ebay.com/rover/0/0/0?m...2F173421393290 I suspect this part may be a later generation camera module than the module in the article you refer to. I am hoping the settings from the donor car are still retained. My concern is that it will have an older I Level to the other ECU's in my car and may not "talk" to them as they should.
__________________
Current: MY 20 X5 2.5d xDrive MSport
MY 17 X5 2.5d sDrive |
|
Appreciate
0
|
10-14-2018, 03:58 PM | #6 |
Private First Class
89
Rep 143
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|