Let’s see your 22”s

[AECDY]

Originally Posted by milemarker60

Basically flush front and rear which is what my goal is with all BMWs.

Wheel & Tire Specs:
Front - 22x10 et40 - Toyo ST3 295/30R22 - 15mm Spacers
Rear - 22x11 et35 - Toyo ST3 335/25R22 - 25mm Spacers

Rig is lowered with H&R Springs up front and Air Spring Links out back. This does make a difference on the rear with respect to the “poke”. Net 1.7”ish drop with .75” rake front to rear with how I set the rear links.

Attachment 2198743

Attachment 2198744

Attachment 2198726

Attachment 2198727

Thank You for the detail info. Very helpful.

[djrabbi]

Originally Posted by kpsingh07

Hey buddy if you don't mind can you please let me know the site for the wheels

I have a road force account

[skoold2003]

Originally Posted by djrabbi

I have a road force account

Does that mean you can get a deal?

[djrabbi]

Originally Posted by skoold2003

Does that mean you can get a deal?

Yup. PM ME

[brandonsim]

Hre p101 22"

[Joe-T]

Originally Posted by Alos

Velos solo lv...amazing.

I have the brushed bronze trim on my X6, wonder how close these wheels are to the trim from BMW. Was thinking of "blacking out" the trim, but with a bronze 22" wheel, maybe the accents would look good

[mpowered5]

22x10.5
22x12
Vossen vfs1
No spacers
M adaptive suspension

[MK2018]

Originally Posted by mpowered5

22x10.5
22x12
Vossen vfs1
No spacers
M adaptive suspension

Looks great

[skoold2003]

Originally Posted by mpowered5

22x10.5
22x12
Vossen vfs1
No spacers
M adaptive suspension

Hey, I see that you have a tow hitch on your ride. I just started a thread talking about the safety of running 22's and towing. Since running 335/25/22 and 295/30/22 (I assume that's what you have) is just under the recommended load rating, is towing in addition pushing our luck? Or is it just Discount Tire and Costco Tire Shop being way overly cautious? Have you had any issues while towing?

[Bigfishe]

rohana RFX-11 Bronze
Toyo STIII 295/335 typ

[KCTiger]

Originally Posted by Bigfishe

rohana RFX-11 Bronze
Toyo STIII 295/335 typ

That is a great look! Any plans to lower it?

[Bigfishe]

Originally Posted by KCTiger

That is a great look! Any plans to lower it?

yes,
still undecided on being conservative with Dinan springs/bumpstops
or just going full Coilovers.

[KCTiger]

Originally Posted by Bigfishe

yes,
still undecided on being conservative with Dinan springs/bumpstops
or just going full Coilovers.

I really want to do springs and call it good but I am definitely going full coil overs. The feedback has been so positive.

[mpowered5]

Originally Posted by skoold2003

Hey, I see that you have a tow hitch on your ride. I just started a thread talking about the safety of running 22's and towing. Since running 335/25/22 and 295/30/22 (I assume that's what you have) is just under the recommended load rating, is towing in addition pushing our luck? Or is it just Discount Tire and Costco Tire Shop being way overly cautious? Have you had any issues while towing?

Sorry for the late reply.

I don't do a whole lot of towing with it. A small utility trailer has been the extent of it. No issues. But I wouldn't be afraid to tow anything

I left the hitch in for a good while. My wife has been rear ended twice now with it. So we figure it might help stop that. It's become almost a joke that it has a big bullseye on painted on the back.

[M302_imola]

Originally Posted by Bigfishe

rohana RFX-11 Bronze
Toyo STIII 295/335 typ

Did you tent the fogs yourself?

[Bigfishe]

Originally Posted by M302_imola

Did you tent the fogs yourself?

sure did, look bad?
used VViViD

[KCTiger]

I couldn't tell you did them yourself! I had a window tinter do mine and they look good (imo) from a distance but up close not so much. In other words, yours probably look just as good as what "professionals" did.

[M302_imola]

Originally Posted by Bigfishe

sure did, look bad?
used VViViD

Look great to me from the pic. Was it tough to do? I'd like to do this to mine.

[Bigfishe]

Originally Posted by M302_imola

Look great to me from the pic. Was it tough to do? I'd like to do this to mine.

very easy, light heat gun helps

[skoold2003]

I finally got my 22s put on. This is sort of a before/mid pic since I still plan to get spacers, a rack and the black side vent covers. Also big thanks to djrabbi for getting me a good deal on the wheels!!

[KCTiger]

Originally Posted by skoold2003

I finally got my 22s put on. This is sort of a before/mid pic since I still plan to get spacers, a rack and the black side vent covers. Also big thanks to djrabbi for getting me a good deal on the wheels!!

Looks awesome! Are the center caps black and white/gray? If so, you need to do the trunk and hood roundels! I can show you a pic of what mine look like if you'd like to see it, though my car is black.

Again though, your car looks amazing. I haven't seen the front deflector deletes in black on a white car but think they look great.

[skoold2003]

Originally Posted by KCTiger

Looks awesome! Are the center caps black and white/gray? If so, you need to do the trunk and hood roundels! I can show you a pic of what mine look like if you'd like to see it, though my car is black.

Again though, your car looks amazing. I haven't seen the front deflector deletes in black on a white car but think they look great.

Thanks man. Ya the center caps are carbon fiber black and white. I got the roundels to match but the back one is different for our cars.