RG Sport - Spacers on F15/F16 X5/X6 F85/F86 X5M/X6M

[r33_RGSport]

Originally Posted by Duckengine

Hello Ben - looking to add spacers to put rims (winter and summer) near the edge of the fender flares. 2015 X5 50i sport. Vin 0J76600

Winter - 19” 467..255x50 square

Summer - 21” Double spoke 375...rear 325x30x21 & front 285x35x21

PM'ed

[kevinpb639]

Originally Posted by r33_RGSport

PM'ed.

Hi Ben, could you also please quote me for 5mm/15mm with lugs? Thanks

[r33_RGSport]

Originally Posted by kevinpb639

Hi Ben, could you also please quote me for 5mm/15mm with lugs? Thanks

PM'ed

[jiggz]

Originally Posted by r33_RGSport

For F85 with 612M, I recommend 5/12 for conservative setup and 15/15 for flush setup.

For F15 with 599M, I assume you'd have same recommendation as above? I believe wheel specs are the same.

[r33_RGSport]

Originally Posted by jiggz

For F15 with 599M, I assume you'd have same recommendation as above? I believe wheel specs are the same.

Yes. You are right.

[duercos]

Hi Ben! I am thinking to get some spacers and lowering springs for my 18 f16 msport w 19" 623m, no fender flares.
What would you recommend? Of course I want no worsening of ride quality or any possibility of rubbing. Thanks!

[r33_RGSport]

Originally Posted by duercos

Hi Ben! I am thinking to get some spacers and lowering springs for my 18 f16 msport w 19" 623m, no fender flares.
What would you recommend? Of course I want no worsening of ride quality or any possibility of rubbing. Thanks!

PM me last 7 of your VIN and I'll give you a quote.

[TW AUS]

Hi Ben

I've got a Euro 50i build 09.2014 and am wanting to fit 22 inch Beyern wheels with 72.6 bore all around.

I was looking at H&R TRAK+ Hub Adapters, 15mm front and 20mm rear (part #3075740725 and #4075740725). Can you advise if these will fit and if so can you supply them?

[r33_RGSport]

Originally Posted by TW AUS

Hi Ben

I've got a Euro 50i build 09.2014 and am wanting to fit 22 inch Beyern wheels with 72.6 bore all around.

I was looking at H&R TRAK+ Hub Adapters, 15mm front and 20mm rear. Can you advise if these will fit and if so can you supply them?

Yea, it will work depending on the wheel's width and offset.
And, yes, I can supply you with them.
PM me the details on the wheels and I'll see whether 15/20 will work or not.

[rney]

Originally Posted by r33_RGSport

The rear flare is wider toward the end. That is why it looks not flush from the front but looks flush from the rear.
You can go 25mm in the rear, but I think that would not right from the front angle.

I just installed 375 M Wheels: 22x10 +40 / 22x11 +35 on my ‘16 X5 50i. Sport. Lowered on KWs. Definitely need spacers. My tuner shop wasn’t sure on spacer size front & back. I want the wheels/tires flush with my fenders. You think 15 front 20 rear would do the trick?

[r33_RGSport]

Originally Posted by rney

I just installed 375 M Wheels: 22x10 +40 / 22x11 +35 on my ‘16 X5 50i. Sport. Lowered on KWs. Definitely need spacers. My tuner shop wasn’t sure on spacer size front & back. I want the wheels/tires flush with my fenders. You think 15 front 20 rear would do the trick?

How low are you?

15/20 will be good. But if you are slammed, you can do 15/25.

[rney]

Originally Posted by r33_RGSport

How low are you?

15/20 will be good. But if you are slammed, you can do 15/25.

Here a few pics from today. I may go lower but this is how she sits currently.

[r33_RGSport]

Originally Posted by rney

Here a few pics from today. I may go lower but this is how she sits currently.

To be safe, 15/20.

[rney]

Originally Posted by r33_RGSport

To be safe, 15/20.

Ok thank for the advice. I’ll let the guys know

[BobBeau]

Anyone have some pics of 15/20 with the staggered, OEM 20's?

[r33_RGSport]

Originally Posted by F85MTuNED

Anybody have photos dropped on KW's running 15mm all around? Would be nice to see how it looks so I could compare with 15/20

Originally Posted by BobBeau

Anyone have some pics of 15/20 with the staggered, OEM 20's?

I may have some pictures on my IG if you want to check it out.

[X5M50D]

Hi All,
I know there has been a lot of discussion about what are the best size spacers for your X5s.
My spec SUV is X5M50d F15 2017 with 285/35/21 fronts and 325/30/21 rear wheels.
At the moment I'm on the 20" standard spec M wheels with winter shoes.
When it comes to putting the summer shoes back on I really would like to fill out the wheel arches using the after market spacers. I have a number of questions being a novice car DIY'er.
1. What size spacers would suit my size summer wheels and sit nicely in the wheel arch? I'm thinking 15 fronts and 20 rears but not sure these will cause the wheels to rub on the fender extenders?
2. Are these fairly easy to install? I assume the spacers fit onto the wheel rim using the supplied bolts and the existing wheels onto the spacers using the existing nuts?
3. What make of spacer should I be looking for that are not too expensive and who should I be buying from. Obviously RGSport would be great but with me being across the pond, may be costly shipping. What about Ebay and if so can anyone recommend a supplier?
4. Is there anything else I need to be aware of when installing or are there any adjustments I need to do to the car set up?
5. Will this affect the car warranty?
6. Will having spacers have any affect with future tyre wear or fuel consumption.
Thanks for reading my thread and hope someone can help me with my questions.
Cheers

[X5M50D]

Hello everyone!

Would be great to have some answers to my questions

Cheers

[X5M50D]

Hi Ben,
Just read through the 20 pages so looking at 15/20 spacers with the extended lug bolts (which I understand I need).
Can you email me a price to ship to the UK please.
Thanks

[r33_RGSport]

Originally Posted by X5M50D

Hi Ben,
Just read through the 20 pages so looking at 15/20 spacers with the extended lug bolts (which I understand I need).
Can you email me a price to ship to the UK please.
Thanks

PM'ed.

My apology that I didn't reply your previous posts. I thought you were asking the end users.

[skoold2003]

Originally Posted by r33_RGSport

PM'ed.

My apology that I didn't reply your previous posts. I thought you were asking the end users.

I have about 1/2" from the tires to the top of the fender flare (measured with weighted tape) both front and back. What do you think would be the best spacer size for that case? Would 15mm be too much?

[r33_RGSport]

Originally Posted by skoold2003

I have about 1/2" from the tires to the top of the fender flare (measured with weighted tape) both front and back. What do you think would be the best spacer size for that case? Would 15mm be too much?

Which wheel are you on?