BMW Coding Thread

[Muzza]

Originally Posted by jdbretz

Yes this is possible.

https://f80.bimmerpost.com/forums/sh...3&postcount=30

I coded it into mine and it works fine based off the info above.

Thank you so much. I’ll give this a shot.

Who’s maintaining the cheat sheet? This needs to go in there.

[M6BMWDriver]

Originally Posted by Muzza

Thank you so much. I’ll give this a shot.

Who’s maintaining the cheat sheet? This needs to go in there.

Does anyone know where i can set the iDrive screen to remember the last settings.

In a f30 2018 340 the setting i thought that will keep it was
TCM_ MSA_..... to set both to ACTIVE
Is there anywhere else to check?

Thank you in advance

[ManImCool]

Originally Posted by ManImCool

I hate it when the car automatically adjusts/steps down the heated/cooled seats from the high to medium setting after 5 or so minutes. Is there a way to code that off?

Gentle bump. Is this not possible?

[CatalinP]

The answer is 2 posts above your last...

[cvillanFL]

Please send me the latest psdzdata. Thanks!

[albec]

Originally Posted by shawnsheridan

No, not technically, but determining which few firmware files are needed and separating them out would be quite tedious.

If you are out of space on your local hard drive, you should leave local psdzdata folder empty and put psdzdata folder extracted from PSdZData Full archive on an external drive, and then use Windows MKLINK command to create a Windows Symbolic Link, for example from C:\ESysData\psdzdata to E:\psdzdata.

Hi Shawn,

I tried to flash my ECU, but could not get the I-step to show like the description says!
Both ship and target are grey, any ideas?

[shawnsheridan]

Originally Posted by albec

Hi Shawn,

I tried to flash my ECU, but could not get the I-step to show like the description says!
Both ship and target are grey, any ideas?

Flashing ECU's with >= v.4.17.40 PSdZData require using newer E-Sys 3.33.x. (Do NOT use with E-Sys Launcher PREMIUM 2.x).

[albec]

Originally Posted by shawnsheridan

Flashing ECU's with >= v.4.17.40 PSdZData require using newer E-Sys 3.33.x. (Do NOT use with E-Sys Launcher PREMIUM 2.x).

Do you have a launcher and esys version that would work together?

[Almaretto]

Originally Posted by albec

Do you have a launcher and esys version that would work together?

Launcher is not required for flashing.

[albec]

Originally Posted by Almaretto

Launcher is not required for flashing.

Thanks 👍

[cvillanFL]

Originally Posted by cvillanFL

Please send me the latest psdzdata. Thanks!

Could someone send the latest psdzdata link? I think I may have an older version, but not sure. Thanks!

[Almaretto]

Originally Posted by cvillanFL

Could someone send the latest psdzdata link? I think I may have an older version, but not sure. Thanks!

There is no advantage to always downloading the latest. Only reason to update is if you get "not found [C012]" error when "Read Coding Data." Computer PSdZData must be > vehicle i-Step.

https://www.bimmerfest.com/forums/sh...d.php?t=983244

[skoold2003]

Originally Posted by shawnsheridan

Flashing ECU's with >= v.4.17.40 PSdZData require using newer E-Sys 3.33.x. (Do NOT use with E-Sys Launcher PREMIUM 2.x).

Hey, I'm trying to get up and running but having trouble with Launcher. I've tried both the ESysLauncherPROSetup_2.8.2_Build_162 (big FU) version and the ESysLauncherPremiumSetup_2.8.2_Build_155 version. The latter doesn't open at all and the big FU version opens but never launches E–sys. Here's the rest:

– Parallels windows 10 VM
– E–sys 3.27.1
– v.4.18.22_PSdZData_Lite

I saw you mention earlier that later versions don't work on VM's. Am I able to do any coding with this setup? If not what do I need to do?

Thanks in advance

[shawnsheridan]

Originally Posted by skoold2003

Hey, I'm trying to get up and running but having trouble with Launcher. I've tried both the ESysLauncherPROSetup_2.8.2_Build_162 (big FU) version and the ESysLauncherPremiumSetup_2.8.2_Build_155 version. The latter doesn't open at all and the big FU version opens but never launches E–sys. Here's the rest:

– Parallels windows 10 VM
– E–sys 3.27.1
– v.4.18.22_PSdZData_Lite

I saw you mention earlier that later versions don't work on VM's. Am I able to do any coding with this setup? If not what do I need to do?

Thanks in advance

If you use a VM, you have to use older E-Sys Launcher Premium 2.6.2 and ReArm Script.

[skoold2003]

Originally Posted by shawnsheridan

If you use a VM, you have to use older E-Sys Launcher Premium 2.6.2 and ReArm Script.

Aaah.. good to know I'm not crazy!

Do you happen to have a mega link for that one you can send me?

[shawnsheridan]

Originally Posted by skoold2003

Aaah.. good to know I'm not crazy!

Do you happen to have a mega link for that one you can send me?

PM sent.

[skoold2003]

Originally Posted by shawnsheridan

PM sent.

That worked. Thanks Shawn, you're awesome.

[shawnsheridan]

Originally Posted by skoold2003

That worked. Thanks Shawn, you're awesome.

[albec]

I now got esys working with the full psdzdata.

I just tried to flash my head unit. I get the following erroes!

MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleFo rFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[HU_NBT - 63] Failed ProgrammingPrecondition ECUId:HU_NBT_0x63 error ID:9 - ignition not activated (clamp 15 off) [THROWABLE]
[] prepareVehicleForFlash finished [PROGRESS]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "5min 45s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

and my screen is blue!

Please help

[albec]

Originally Posted by albec

I now got esys working with the full psdzdata.

I just tried to flash my head unit. I get the following erroes!

MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleFo rFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[HU_NBT - 63] Failed ProgrammingPrecondition ECUId:HU_NBT_0x63 error ID:9 - ignition not activated (clamp 15 off) [THROWABLE]
[] prepareVehicleForFlash finished [PROGRESS]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "5min 45s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

and my screen is blue!

Please help

[IMG][/IMG]
Bonus info, the screen is on and stays on after I lock the doors on the car.

[mrfochon]

Originally Posted by albec

[IMG][/IMG]
Bonus info, the screen is on and stays on after I lock the doors on the car.

Can you reflash?

[InsipidMonkey]

Originally Posted by albec

[HU_NBT - 63] Failed ProgrammingPrecondition ECUId:HU_NBT_0x63 error ID:9 - ignition not activated (clamp 15 off) [THROWABLE]

Did you try flashing with the ignition on?