Feeler.. Special order Future classic spacers for X5M / X6M

notyourdadsf86 · 07-14-2020, 06:46 AM

Too late to add my name to the list? Lol

F85MTuNED · 07-14-2020, 01:14 PM

Quote:

Originally Posted by notyourdadsf86

Too late to add my name to the list? Lol

Quote:

Originally Posted by skoold2003

.

Unfortunately fellas it Doesn't seem like we can get this done unless everyone agrees on 1 size which is kinda wack but I fully understand where the company is coming from.

notyourdadsf86 · 07-14-2020, 01:15 PM

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Too late to add my name to the list? Lol

Quote:

Originally Posted by skoold2003

.

Unfortunately fellas it Doesn't seem like we can get this done unless everyone agrees on 1 size which is kinda wack but I fully understand where the company is coming from.

What size are people thinking? I dont have a problem agreeing to a set size if it means we can get this done.

F85MTuNED · 07-14-2020, 03:15 PM

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Too late to add my name to the list? Lol

Quote:

Originally Posted by skoold2003

.

Unfortunately fellas it Doesn't seem like we can get this done unless everyone agrees on 1 size which is kinda wack but I fully understand where the company is coming from.

What size are people thinking? I dont have a problem agreeing to a set size if it means we can get this done.

Same here but there's so much of a mixture.. seems like most want 15mm-20mm

notyourdadsf86 · 07-15-2020, 12:11 PM

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Too late to add my name to the list? Lol

Quote:

Originally Posted by skoold2003

.

Unfortunately fellas it Doesn't seem like we can get this done unless everyone agrees on 1 size which is kinda wack but I fully understand where the company is coming from.

What size are people thinking? I dont have a problem agreeing to a set size if it means we can get this done.

Same here but there's so much of a mixture.. seems like most want 15mm-20mm

Can we make a WhatsApp or something to get an actual group going? Think it would be easier than trying to coordinate on here and through DMs

Herofmine · 07-16-2020, 06:22 PM

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Too late to add my name to the list? Lol

Quote:

Originally Posted by skoold2003

.

Unfortunately fellas it Doesn't seem like we can get this done unless everyone agrees on 1 size which is kinda wack but I fully understand where the company is coming from.

What size are people thinking? I dont have a problem agreeing to a set size if it means we can get this done.

Same here but there's so much of a mixture.. seems like most want 15mm-20mm

Can we make a WhatsApp or something to get an actual group going? Think it would be easier than trying to coordinate on here and through DMs

Lets do Whatsapp chat who is going to create group chat?

notyourdadsf86 · 07-16-2020, 06:23 PM

Quote:

Originally Posted by Herofmine

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by F85MTuNED

Quote:

Originally Posted by notyourdadsf86

Too late to add my name to the list? Lol

Quote:

Originally Posted by skoold2003

.

Unfortunately fellas it Doesn't seem like we can get this done unless everyone agrees on 1 size which is kinda wack but I fully understand where the company is coming from.

What size are people thinking? I dont have a problem agreeing to a set size if it means we can get this done.

Same here but there's so much of a mixture.. seems like most want 15mm-20mm

Can we make a WhatsApp or something to get an actual group going? Think it would be easier than trying to coordinate on here and through DMs

Lets do Whatsapp chat who is going to create group chat?

I will. DM me your numbers if you're interested!

Blewx5m · 10-26-2020, 09:06 AM

A fellow member shared this exciting info with me...Future Classic spacers for our rides!

https://futureclassic.us/collections...er-kit-74-1-cb

F85MTuNED · 10-28-2020, 01:19 AM

Wow so they ended up making them... smart choice on their behalf I would hope they seen the high demand and decided to pull the trigger.

I'm going to check out sizes and probably purchase another set.

Blewx5m · 10-28-2020, 01:56 PM

Quote:

Originally Posted by F85MTuNED

Wow so they ended up making them... smart choice on their behalf I would hope they seen the high demand and decided to pull the trigger.

I'm going to check out sizes and probably purchase another set.

Lol I've been thinking about it too smh

skoold2003 · 10-28-2020, 03:13 PM

Quote:

Originally Posted by F85MTuNED

Wow so they ended up making them... smart choice on their behalf I would hope they seen the high demand and decided to pull the trigger.

I'm going to check out sizes and probably purchase another set.

They would have done better getting back to you on a group buy. By now I'm sure most of us have happily been running H&Rs. That being said I might pick up a pair of them.. for the team. 😀

F85MTuNED · 10-29-2020, 10:01 AM

Quote:

Originally Posted by skoold2003

Quote:

Originally Posted by F85MTuNED

Wow so they ended up making them... smart choice on their behalf I would hope they seen the high demand and decided to pull the trigger.

I'm going to check out sizes and probably purchase another set.

They would have done better getting back to you on a group buy. By now I'm sure most of us have happily been running H&Rs. That being said I might pick up a pair of them.. for the team. 😀

I agree and same here lol

BP709 · 11-02-2020, 01:28 PM

FYI do not order the future classic spacers. They don't fit the front! I saw this thread the other day and immediately ordered two sets of 15mm. They fit the rear only. Look at the gap on the front. (See picture) I've already contacted them and attached a pic of their response.

notyourdadsf86 · 11-02-2020, 06:35 PM

Quote:

Originally Posted by BP709

FYI do not order the future classic spacers. They don't fit the front! I saw this thread the other day and immediately ordered two sets of 15mm. They fit the rear only. Look at the gap on the front. (See picture) I've already contacted them and attached a pic of their response.

wow. good to know. was literally at check out ready to go. makes sense that they are now selling pairs I guess. Sucks you were the first though. Hope they come out with fronts soon. How do you like the rears?

BP709 · 11-02-2020, 07:50 PM

Quote:

Originally Posted by notyourdadsf86

Quote:

Originally Posted by BP709

FYI do not order the future classic spacers. They don't fit the front! I saw this thread the other day and immediately ordered two sets of 15mm. They fit the rear only. Look at the gap on the front. (See picture) I've already contacted them and attached a pic of their response.

wow. good to know. was literally at check out ready to go. makes sense that they are now selling pairs I guess. Sucks you were the first though. Hope they come out with fronts soon. How do you like the rears?

They are a quality product no doubt. I really like how they are bolted on to the hub with the provided longer bolts that thread into the rotor hold down location. Was a little bummed they didn't work for the front. Trying to decide if I should wait for FC to get them sorted for the front or just buy some H&R.

F85MTuNED · 11-02-2020, 08:18 PM

IMO if they would've looked to put these together when I was inquiring and had all the guys ready to purchase maybe this would've happened at earlier stages so when the final product is out for sale all transactions would be smooth with no hiccups.

But all in all IND / FC are solid so I'm sure they'll sort everything out ASAP.

skoold2003 · 11-03-2020, 12:06 AM

Quote:

Originally Posted by BP709

They are a quality product no doubt. I really like how they are bolted on to the hub with the provided longer bolts that thread into the rotor hold down location. Was a little bummed they didn't work for the front. Trying to decide if I should wait for FC to get them sorted for the front or just buy some H&R.

What size are you looking for? I might be selling my 5mm H&Rs soon..

Edit: Sorry I just saw that you ordered 15mm. BTW my name is Brian too

ljb1 · 12-05-2020, 07:59 PM

I JUST got the H&R spacers in October

would have been game.

I am running my spacers on the Motorsport Hardware Stud Conversion kit (.25 thread to .5 thread), so it accomplishes the same thing in terms of 'taking it a step farther', just sliiiiiiightly heavier I imagine.

skoold2003 · 04-25-2021, 06:21 PM

I'd anyone running these yet? If so how are they working out?

Blewx5m · 04-25-2021, 10:16 PM

Quote:

Originally Posted by skoold2003

I'd anyone running these yet? If so how are they working out?

I'll share my experience... I have a set of 15mm HR and I decided to try the FC 15mm spacers bc I felt like wasting money haha the quality is amazing.. I love their design and how u can bolt them onto the hub... The rears fit perfect and going back n forth with FC they sent me another set for the fronts bc the original ones didn't sit flush... Well the 2nd set doesn't sit flush either until I took off the wheel hub dust cover off... I messaged them about it and I haven't received a response and it's been over 2 weeks now.. Hope this helps

skoold2003 · 04-25-2021, 10:47 PM

Quote:

Originally Posted by Blewx5m

Quote:

Originally Posted by skoold2003

I'd anyone running these yet? If so how are they working out?

I'll share my experience... I have a set of 15mm HR and I decided to try the FC 15mm spacers bc I felt like wasting money haha the quality is amazing.. I love their design and how u can bolt them onto the hub... The rears fit perfect and going back n forth with FC they sent me another set for the fronts bc the original ones didn't sit flush... Well the 2nd set doesn't sit flush either until I took off the wheel hub dust cover off... I messaged them about it and I haven't received a response and it's been over 2 weeks now.. Hope this helps

It does, thanks! I'm probably gonna get a set of 10s for the front so just need to verify that it'll work for the F15. I hope they get it straightened out for you.

BP709 · 04-26-2021, 12:11 PM

Quote:

Originally Posted by skoold2003

I'd anyone running these yet? If so how are they working out?

FYI future classic has redesigned them. The new "v2" spacer fits the front and rear. I have them and they are awesome. Love how they bolt up through the rotor hold down.

07-14-2020, 06:46 AM	#67
notyourdadsf86 Private First Class 165 Rep 199 Posts Drives: 2016 X6M Join Date: Oct 2019 Location: CT iTrader: (0) Garage List 2016 BMW X6M [0.00]	Too late to add my name to the list? Lol __________________ excu6me on Instagram. OEM X6M Build
	Appreciate 0 Quote

10-26-2020, 09:06 AM	#74
Blewx5m Private First Class 128 Rep 135 Posts Drives: 2015 x5m Join Date: Jun 2019 Location: Long island iTrader: (1)	A fellow member shared this exciting info with me...Future Classic spacers for our rides! https://futureclassic.us/collections...er-kit-74-1-cb
	Appreciate 3 BadCompany83.00 F85MTuNED1620.50 Slickrick2211.00 Quote

10-28-2020, 01:19 AM	#75
F85MTuNED IG: @88jae88 1621 Rep 1,734 Posts Drives: ///Ⓜ️ Join Date: Mar 2015 Location: NY / NJ iTrader: (1)	Wow so they ended up making them... smart choice on their behalf I would hope they seen the high demand and decided to pull the trigger. I'm going to check out sizes and probably purchase another set. __________________ IM POOR..
	Appreciate 1 Blewx5m128.00 Quote

11-02-2020, 01:28 PM	#79
BP709 Private First Class 230 Rep 191 Posts Drives: BMW F97 X3m, Harrop E90 M3 Join Date: Jun 2019 Location: Houston iTrader: (0)	FYI do not order the future classic spacers. They don't fit the front! I saw this thread the other day and immediately ordered two sets of 15mm. They fit the rear only. Look at the gap on the front. (See picture) I've already contacted them and attached a pic of their response. Attached Images
	Appreciate 3 Herofmine412.50 F85MTuNED1620.50 Blewx5m128.00 Quote

11-02-2020, 08:18 PM	#82
F85MTuNED IG: @88jae88 1621 Rep 1,734 Posts Drives: ///Ⓜ️ Join Date: Mar 2015 Location: NY / NJ iTrader: (1)	IMO if they would've looked to put these together when I was inquiring and had all the guys ready to purchase maybe this would've happened at earlier stages so when the final product is out for sale all transactions would be smooth with no hiccups. But all in all IND / FC are solid so I'm sure they'll sort everything out ASAP. __________________ IM POOR..
	Appreciate 1 BP709230.00 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5M (F85) and X6M (F86) Forum
Feeler.. Special order Future classic spacers for X5M / X6M

12-05-2020, 07:59 PM	#84
ljb1 @blurplebmw 108 Rep 44 Posts Drives: 2023 BMW m340i xDrive Join Date: May 2015 Location: Winnipeg, Canada iTrader: (0) Garage List 2019 BMW X5 xDrive 40i [0.00] 2023 BMW m340i xDrive [0.00]	I JUST got the H&R spacers in October would have been game. I am running my spacers on the Motorsport Hardware Stud Conversion kit (.25 thread to .5 thread), so it accomplishes the same thing in terms of 'taking it a step farther', just sliiiiiiightly heavier I imagine. __________________ terror in the streets.
	Appreciate 0 Quote

04-25-2021, 06:21 PM	#85
skoold2003 Major 791 Rep 1,179 Posts Drives: 2014 X5 50i M Sport, M3(sold) Join Date: Nov 2012 Location: PNW iTrader: (0) Garage List 2014 X5 50i [7.50]	I'd anyone running these yet? If so how are they working out?
	Appreciate 0 Quote