Dragy F85 times definitive thread.

[M&M]

Originally Posted by onfireX5

Killer pass ! Time slip ?

Yes got slip but was only 11.3 on that run.

[M&M]

Originally Posted by CT335xi

You would give a new m5 a run for its money!

Yes sir:

[onfireX5]

Originally Posted by M&M

Yes got slip but was only 11.3 on that run.

11.3 is a GREAT pass. Post the slip !

[HotTub TimeMachine]

What works best of the line, launch control or brake pedal and throttle (brake boost)?

I remember a quick N54 with 6AT, MT's and DSS axles would need to press the brake pedal so hard he felt like he was bending the firewall to keep it creeping off the line.

[Phara]

Originally Posted by HotTub TimeMachine

What works best of the line, launch control or brake pedal and throttle (brake boost)?

I remember a quick N54 with 6AT, MT's and DSS axles would need to press the brake pedal so hard he felt like he was bending the firewall to keep it creeping off the line.

Have the same question. Think best is lc, but full throttle, but wish to hear from pros

[M&M]

LC is the best, unless u on a prepped, sticky track.

[HydroStream6]

Originally Posted by M&M

Hi guys, made some changes. The meth wasn't spraying at all, fixed that and put bigger nozzles. Took a little weight out, went up a bit on the eth percentage.

Wow! How much boost and how big on the meth nozzles? That's MOVING!

[M&M]

Originally Posted by onfireX5

11.3 is a GREAT pass. Post the slip !

My bad, best time at the track was 11.2 @ 125mph. 60ft 1.71. 6000ft elevation.

[M&M]

Originally Posted by HydroStream6

Wow! How much boost and how big on the meth nozzles? That's MOVING!

24psi peak, 2x large AEM nozzles, equivalent to a CM15.

[HydroStream6]

Originally Posted by M&M

24psi peak, 2x large AEM nozzles, equivalent to a CM15.

That's awesome. Weeeee!!

I have a 50i. Running 21lbs on E30. Makes me want to add meth and up the boost!

[HotTub TimeMachine]

Is the xdi fuel pump and straight e85 for these cars possible?

[E92zilla]

Originally Posted by M&M

24psi peak, 2x large AEM nozzles, equivalent to a CM15.

Originally Posted by M&M

24psi peak, 2x large AEM nozzles, equivalent to a CM15.

Which Tuner are you using ?

[1badttx5m]

Bump bringing this thread back to life

[DgjoX6M2016]

Originally Posted by M&M

Hi here are my numbers, 2016 X6M, custom flash, JB4, downpipes, E40, 6000ft elevation.

Good lord! Retina damaging.

[1badttx5m]

Has anyone else ran close to the low 11 or 10 second range?

[F85MTuNED]

Originally Posted by 1badttx5m

Has anyone else ran close to the low 11 or 10 second range?

Yes DMETune did a 10 second F85 years ago and I've also heard of a guy with an X6M that ran 10.8 as well and hopefully I can get on that list lol.

Fastest I went was 12.1 @ the track and 12.0 on dragy.

[1badttx5m]

Originally Posted by F85MTuNED

Yes DMETune did a 10 second F85 years ago and I've also heard of a guy with an X6M that ran 10.8 as well and hopefully I can get on that list lol.

Fastest I went was 12.1 @ the track and 12.0 on dragy.

Yup I remember seeing the one DME did with pure turbos. I was just curious to see if anyone else has ran decent times.

[CT335xi]

Originally Posted by F85MTuNED

Yes DMETune did a 10 second F85 years ago and I've also heard of a guy with an X6M that ran 10.8 as well and hopefully I can get on that list lol.

Fastest I went was 12.1 @ the track and 12.0 on dragy.

Is that stock ? What track?

[F85MTuNED]

Originally Posted by CT335xi

Is that stock ? What track?

Atco raceway in NJ , hopefully next time I go back I'm stage 2 with DP, I'm just waiting to see what new tune Halim comes with.

[F3085258]

My best. Note the high DA