11-03-2021, 11:31 AM | #1 |
Private First Class
33
Rep 104
Posts |
Front Passenger Side Parking Sensor DIY Needed
Hi,
Need to change Front Passenger Side Parking Sensor, does the bumper cover have to be removed to achieve this? Maybe just remove the headlight assembly to get at it. Any info would be great. Thanks, Frank Last edited by Franktea1$; 11-03-2021 at 12:02 PM.. |
11-03-2021, 12:34 PM | #2 |
Major
455
Rep 1,016
Posts
Drives: BMW X5M, BMW M3, MB E63 AMG
Join Date: Dec 2019
Location: Alexandria, VA
|
Typically the bumper would need to be removed, but if you can access it by removing the head light or the passenger side fender lining, then go for it. 👍🏽
__________________
It is never taken for granted that a commitment to speed and acceleration must be matched with an equivalent ambition when it comes time to stop!
|
Appreciate
0
|
11-03-2021, 09:25 PM | #3 |
Captain
583
Rep 829
Posts |
Except to remove the headlight, the bumper has to come off....
If you look at the diagram, you can access the outer most sensor (Position 158) through the wheel well....all other sensors sit within the bumper cross-member reinforcement bar, so the bumper cover is required to be removed.... Hope this helps. |
Appreciate
0
|
11-04-2021, 10:54 AM | #5 |
Private First Class
33
Rep 104
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|