05-25-2020, 09:01 PM | #1 |
Registered
5
Rep 4
Posts |
2018 X5 35i - MPPK, Racechip GTS Blk & MPE
SORRY MOD, PLEASE DELETE THIS THREAD!
Relatively new to the forum and appreciate all the info and expertise you guys provide. This is my first dyno I've ever done and not entirely sure how I feel about the results, so I was hoping you guys would pitch in with some comments or thoughts. When I picked up my 2018 it already had MPPK, so this dyno doesn't have a stock pull on it. Info: MPPK & MPE Racechip GTS Black, setting 7 Outside Temp: 21 C / 70 F, Sunny and Dry (32% Humidity) Elevation: 3400 ft (Alberta) Gas: 94 Octane 1st pull was obviously the strongest as the engine was at its coolest. 2nd pull was right afterwards 3rd pull we waited about 10 minutes after 2nd pull - NO RACECHIP 4th pull was right after the 3rd pull - NO RACECHIP My thoughts: 1. My torque peak seems a bit high at 458 (crank) 2. 6000rpm, torque has dropped below 250 (crank) 3. Horsepower peak at 358 (crank) - guy told me that i lost maybe 20-25 HP becasue of elevation, and maybe another 20 HP because it was hot and dry (sounds believable, but not sure about the amount) 4. Do my torque and HP curves look right? Last edited by Cue; 05-25-2020 at 09:05 PM.. Reason: Please delete this thread! |
Post Reply |
Bookmarks |
|
|