(100%) How to FLash NBT EVO with Esys + ICOM / ENET (DIY)

[sboz]

Originally Posted by kubax86

Just delete other ECUs and choose only HU_NBT2

I Have the same error.You mean"delete other ECUs".How can i delete other ECUs or Where other ECUs Delete from?Thanks.

[/img][/url]

[kubax86]

Originally Posted by sboz

I Have the same error.You mean"delete other ECUs".How can i delete other ECUs or Where other ECUs Delete from?Thanks.

[/img][/url]

EDIT TAL

[DarkJedi78]

Great Guide!

[InstigatorX]

Quick question…any value in updating the other non-DME ECUs? I don’t think my car (2nd owner) istep was ever updated.

I’m 26% into flashing nbt, fwiw.

EDIT: Success!

[M140_BCS]

Can anyone advise if this fault in HU module will cause any issues if I flash HU to update NBTevo?

It’s the only fault that returns if I delete fault memory.

[TheNine90]

no that wont affect flashing.

[M140_BCS]

SaNGRia Great guide!

Used Esys 3.40.2 & PSdZData 4.41.10 with ENET cable.

Now on NBTevo_Y

shawnsheridan Big thanks for the download.

[JaysonGoh]

By using this guide same version of PsdZ flashing on my F30 NBT EVO ID4 would I get ID6?

[The-Traveler]

Originally Posted by SaNGRia

Hello guys,

I have recently purchased 17' F85 with NBT EVO ID5 and i want to activate the Apple Car...

HMI / CARPLAY_FULLSCREEN => aktiv

Can I do this if the nbt is retrofitted in ESeries and only thing I have is ENET working with hand built VA/FO file. I can code NBT, but no other modules are visible in eSYS. ISTA doesn't seem to work. But maybe I need something to set it up?

[shawnsheridan]

Originally Posted by The-Traveler

Can I do this if the nbt is retrofitted in ESeries and only thing I have is ENET working with hand built VA/FO file. I can code NBT, but no other modules are visible in eSYS. ISTA doesn't seem to work. But maybe I need something to set it up?

If you are talking NBT2 EVO (not NBT as you wrote) Coding NBT is done via CAN Bus, so possible with ENET Cable, but Flash requires Ethernet, so flash can only work if Ethernet was repinned from Quadlock to OABR, and that assumes a late model E-Series as early E-Series did not have Ethernet on Quadlock.

[The-Traveler]

Originally Posted by shawnsheridan

If you are talking NBT2 EVO (not NBT as you wrote) Coding NBT is done via CAN Bus, so possible with ENET Cable, but Flash requires Ethernet, so flash can only work if Ethernet was repinned from Quadlock to OABR, and that assumes a late model E-Series as early E-Series did not have Ethernet on Quadlock.

Yes sorry NBTEVO (NBT2) repinned to OABR with ENET cable working through OBD port. I just don't know how to build a TAL when all I have is custom FA/VO file and can't read modules from the car. Read ECU returns one ECU in the Coding section and that's the NBT2.

[shawnsheridan]

Originally Posted by The-Traveler

Yes sorry NBTEVO (NBT2) repinned to OABR with ENET cable working through OBD port. I just don't know how to build a TAL when all I have is custom FA/VO file and can't read modules from the car. Read ECU returns one ECU in the Coding section and that's the NBT2.

Calculate SVT Target and Flash TAL. Ignore all ECU except HU_NBT2 when executing Flash TAL.

[The-Traveler]

Originally Posted by shawnsheridan

Calculate SVT Target and Flash TAL. Ignore all ECU except HU_NBT2 when executing Flash TAL.

Thanks Shawn, I got this far but it says I have missing files. I don't know the shipment istep from this 2019, so I picked 2018 as a random shipment istep. Could that be the issue?

[shawnsheridan]

Originally Posted by The-Traveler

Thanks Shawn, I got this far but it says I have missing files. I don't know the shipment istep from this 2019, so I picked 2018 as a random shipment istep. Could that be the issue?

Understand that for a non factory fitted ECU, its I-Step Shipment is most likely not the same as the car's I-Step Shipment. The correct I-Step Shipment is one where the ECU being flashed has HWEL in svt_soll that is Black, not Red / Blue.

So after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.

As for Missing SWEs, you need PSdZData Full, not Lite.

[The-Traveler]

Originally Posted by shawnsheridan

Understand that for a non factory fitted ECU, its I-Step Shipment is most likely not the same as the car's I-Step Shipment. The correct I-Step Shipment is one where the ECU being flashed has HWEL in svt_soll that is Black, not Red / Blue.

So after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.

As for Missing SWEs, you need PSdZData Full, not Lite.

Shawn you are a life saver! Thanks.
Should I turn off HTTP transfers? If so, how long will a NBT2 flash take? Do I need a crazy strong battery tender? I only have 1.5A trickle charger and I'm on a lithium battery so it will last a while this way, but maybe not overnight.

[shawnsheridan]

Originally Posted by The-Traveler

Shawn you are a life saver! Thanks.
Should I turn off HTTP transfers? If so, how long will a NBT2 flash take? Do I need a crazy strong battery tender? I only have 1.5A trickle charger and I'm on a lithium battery so it will last a while this way, but maybe not overnight.

No. Flash NBT2 will take about 45 minutes. Car must be on a 50+ Amp Continuous Charger or jumped to another car with its motor running.

[The-Traveler]

Originally Posted by shawnsheridan

No. Flash NBT2 will take about 45 minutes. Car must be on a 50+ Amp Continuous Charger or jumped to another car with its motor running.

I did it all again and instead of red and blue, it's all blue now. What does that mean? Also, this time around check software version doesn't complain about missing files even though I haven't added the full pzdData.

[shawnsheridan]

Originally Posted by The-Traveler

I did it all again and instead of red and blue, it's all blue now. What does that mean? Also, this time around check software version doesn't complain about missing files even though I haven't added the full pzdData.

Blue is actual state. You need to calculate svt_soll to see Target state and any firmware file updates.

[The-Traveler]

Originally Posted by shawnsheridan

Blue is actual state. You need to calculate svt_soll to see Target state and any firmware file updates.

Well I'm randomly picking the shipment as 2018 before the 2019 car was probably built. NBT-EVO- O is what I have.

Then I click calculate and I get red and blue, then I click HW-IDs from SVTactual but nothing changes in the colours.

[shawnsheridan]

Originally Posted by The-Traveler

Well I'm randomly picking the shipment as 2018 before the 2019 car was probably built. NBT-EVO- O is what I have.

Then I click calculate and I get red and blue, then I click HW-IDs from SVTactual but nothing changes in the colours.

If EVO is retrofitted, understand that for a non factory fitted ECU, its I-Step Shipment is most likely not the same as the car's I-Step Shipment. The correct I-Step Shipment is one where the ECU being flashed has HWEL in svt_soll that is Black, not Red / Blue.

So after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.

[The-Traveler]

Originally Posted by shawnsheridan

If EVO is retrofitted, understand that for a non factory fitted ECU, its I-Step Shipment is most likely not the same as the car's I-Step Shipment. The correct I-Step Shipment is one where the ECU being flashed has HWEL in svt_soll that is Black, not Red / Blue.

So after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.

Thanks Shawn! In the image above I did all that as per your instructions, and HWEL looks to be black. Are we seeing the same thing?

[shawnsheridan]

Originally Posted by The-Traveler

Thanks Shawn! In the image above I did all that as per your instructions, and HWEL looks to be black. Are we seeing the same thing?

Yes. Flash it if you want.